训练日志刷屏使我痛苦，我开发了VLog，可以在任意训练代码中轻松使用~
例如，通过callback嵌入到lightgbm/catboost/transformers/ultralytics，乃至keras库的训练代码流程中~
before:
after：
为什么不用tensorboard或者wandb?
tensorboard需要开端口权限，服务器开发环境有时候没有端口权限~
wandb需要联网，有时候网速很差或者没有网，影响体验~
综合对比考虑如下表
一，VLog基本原理
VLog类主要有以下5个方法。
from torchkeras import VLog
#1, 初始化方法
vlog = VLog(epochs=20, monitor_metric='val_loss', monitor_mode='min')
#2, 显示开始空图表
vlog.log_start()
#3, 更新step级别日志
vlog.log_step({'train_loss':0.003,'val_loss':0.002})
#4, 更新epoch级别日志
vlog.log_epoch({'train_acc':0.9,'val_acc':0.87,'train_loss':0.002,'val_loss':0.03})
#5, 输出最终稳定状态图表
vlog.log_end()import time
import math,random
from torchkeras import VLog
epochs = 10
batchs = 30
#0, 指定监控北极星指标，以及指标优化方向
vlog = VLog(epochs, monitor_metric='val_loss', monitor_mode='min')
#1, log_start 初始化动态图表
vlog.log_start()
for epoch in range(epochs):
#train
for step in range(batchs):
#2, log_step 更新step级别日志信息，打日志，并用小进度条显示进度
vlog.log_step({'train_loss':100-2.5*epoch+math.sin(2*step/batchs)})
time.sleep(0.05)
#eval
for step in range(20):
#3, log_step 更新step级别日志信息，指定training=False说明在验证模式，只打日志不更新小进度条
vlog.log_step({'val_loss':100-2*epoch+math.sin(2*step/batchs)},training=False)
time.sleep(0.05)
#4, log_epoch 更新epoch级别日志信息，每个epoch刷新一次动态图表和大进度条进度
vlog.log_epoch({'val_loss':100 - 2*epoch+2*random.random()-1,
'train_loss':100-2.5*epoch+2*random.random()-1})
# 5, log_end 调整坐标轴范围，输出最终指标可视化图表
vlog.log_end()
二，在LightGBM中使用VLog
设计一个简单的回调，就可以搞定~
from torchkeras import VLog
class VLogCallback:
def __init__(self, num_boost_round,
monitor_metric='val_loss',
monitor_mode='min'):
self.order = 20
self.num_boost_round = num_boost_round
self.vlog = VLog(epochs = num_boost_round, monitor_metric = monitor_metric,
monitor_mode = monitor_mode)
def __call__(self, env) -> None:
metrics = {}
for item in env.evaluation_result_list:
if len(item) == 4:
data_name, eval_name, result = item[:3]
metrics[data_name+'_'+eval_name] = result
else:
data_name, eval_name = item[1].split()
res_mean = item[2]
res_stdv = item[4]
metrics[data_name+'_'+eval_name] = res_mean
self.vlog.log_epoch(metrics)import datetime
import numpy as np
import pandas as pd
import lightgbm as lgb
from sklearn import datasets
from sklearn.model_selection import train_test_split
from sklearn.metrics import accuracy_score
def printlog(info):
nowtime = datetime.datetime.now().strftime('%Y-%m-%d %H:%M:%S')
print("\n"+"=========="*8 + "%s"%nowtime)
print(info+'...\n\n')
#================================================================================
# 一，读取数据
#================================================================================
printlog("step1: reading data...")
# 读取dftrain,dftest
breast = datasets.load_breast_cancer()
df = pd.DataFrame(breast.data,columns = [x.replace(' ','_') for x in breast.feature_names])
df['label'] = breast.target
df['mean_radius'] = df['mean_radius'].apply(lambda x:int(x))
df['mean_texture'] = df['mean_texture'].apply(lambda x:int(x))
dftrain,dftest = train_test_split(df)
categorical_features = ['mean_radius','mean_texture']
lgb_train = lgb.Dataset(dftrain.drop(['label'],axis = 1),label=dftrain['label'],
categorical_feature = categorical_features)
lgb_valid = lgb.Dataset(dftest.drop(['label'],axis = 1),label=dftest['label'],
categorical_feature = categorical_features,
reference=lgb_train)
#================================================================================
# 二，设置参数
#================================================================================
printlog("step2: setting parameters...")
boost_round = 50
early_stop_rounds = 10
params = {
'boosting_type': 'gbdt',
'objective':'binary',
'metric': ['auc'], #'l2'
'num_leaves': 15,
'learning_rate': 0.05,
'feature_fraction': 0.9,
'bagging_fraction': 0.8,
'bagging_freq': 5,
'verbose': 0,
'early_stopping_round':5
}
#================================================================================
# 三，训练模型
#================================================================================
printlog("step3: training model...")
result = {}
vlog_cb = VLogCallback(boost_round, monitor_metric = 'val_auc', monitor_mode = 'max')
vlog_cb.vlog.log_start()
gbm = lgb.train(params,
lgb_train,
num_boost_round= boost_round,
valid_sets=(lgb_valid, lgb_train),
valid_names=('val','train'),
callbacks = [lgb.record_evaluation(result),
vlog_cb]
)
vlog_cb.vlog.log_end()
#================================================================================
# 四，评估模型
#================================================================================
printlog("step4: evaluating model ...")
y_pred_train = gbm.predict(dftrain.drop('label',axis = 1), num_iteration=gbm.best_iteration)
y_pred_test = gbm.predict(dftest.drop('label',axis = 1), num_iteration=gbm.best_iteration)
print('train accuracy: {:.5} '.format(accuracy_score(dftrain['label'],y_pred_train>0.5)))
print('valid accuracy: {:.5} \n'.format(accuracy_score(dftest['label'],y_pred_test>0.5)))
#================================================================================
# 五，保存模型
#================================================================================
printlog("step5: saving model ...")
model_dir = "gbm.model"
print("model_dir: %s"%model_dir)
gbm.save_model("gbm.model")
printlog("task end...")
###
##
#================================================================================2023-11-10 15:39:38
step1: reading data......
================================================================================2023-11-10 15:39:38
step2: setting parameters......
================================================================================2023-11-10 15:39:38
step3: training model......
================================================================================2023-11-10 15:39:44
step4: evaluating model ......
train accuracy: 0.95775
valid accuracy: 0.94406
================================================================================2023-11-10 15:39:44
step5: saving model ......
model_dir: gbm.model
================================================================================2023-11-10 15:39:44
task end......三， 在ultralytics中使用VLog
写个适配的回调~
ultralytics可以做 分类，检测，分割 等等。
这个回调函数是通用的，此处以分类问题为例，改个monitor_metric即可~
cats_vs_dogs数据集可以在公众号算法美食屋后台回复:torchkeras 获取~
from torchkeras import VLog
class VLogCallback:
def __init__(self,epochs,monitor_metric,monitor_mode):
self.vlog = VLog(epochs,monitor_metric,monitor_mode)
def on_train_batch_end(self,trainer):
self.vlog.log_step(trainer.label_loss_items(trainer.tloss, prefix='train'))
def on_fit_epoch_end(self,trainer):
metrics = {k.split('/')[-1]:v for k,v in trainer.metrics.items() if 'loss' not in k}
self.vlog.log_epoch(metrics)
def on_train_epoch_end(self,trainer):
passfrom ultralytics import YOLO
epochs = 10
vlog_cb = VLogCallback(epochs = epochs,
monitor_metric='accuracy_top1',
monitor_mode='max')
callbacks = {
"on_train_batch_end": vlog_cb.on_train_batch_end,
"on_fit_epoch_end": vlog_cb.on_fit_epoch_end
}
model = YOLO(model = 'yolov8n-cls.pt')
for event,func in callbacks.items():
model.add_callback(event,func)
vlog_cb.vlog.log_start()
results = model.train(data='cats_vs_dogs',
epochs=epochs, workers=4) # train the model
vlog_cb.vlog.log_end()
四， 在transformers中使用VLog
waimai评论数据集可以在公众号算法美食屋后台回复:torchkeras 获取~
#回调给你写好了~
from torchkeras.tools.transformers import VLogCallbackimport numpy as np
import pandas as pd
import torch
import datasets
from transformers import AutoTokenizer,DataCollatorWithPadding
from transformers import AutoModelForSequenceClassification
from transformers import TrainingArguments,Trainer
from transformers import EarlyStoppingCallback
from tqdm import tqdm
from transformers import AdamW, get_scheduler
#一，准备数据
df = pd.read_csv("waimai_10k.csv")
ds = datasets.Dataset.from_pandas(df)
ds = ds.shuffle(42)
ds = ds.rename_columns({"review":"text","label":"labels"})
tokenizer = AutoTokenizer.from_pretrained('bert-base-chinese')
ds_encoded = ds.map(lambda example:tokenizer(example["text"]),
remove_columns = ["text"],
batched=True)
#train,val,test split
ds_train_val,ds_test = ds_encoded.train_test_split(test_size=0.2).values()
ds_train,ds_val = ds_train_val.train_test_split(test_size=0.2).values()
data_collator = DataCollatorWithPadding(tokenizer=tokenizer)
dl_train = torch.utils.data.DataLoader(ds_train, batch_size=16, collate_fn = data_collator)
dl_val = torch.utils.data.DataLoader(ds_val, batch_size=16, collate_fn = data_collator)
dl_test = torch.utils.data.DataLoader(ds_test, batch_size=16, collate_fn = data_collator)
for batch in dl_train:
break
print({k: v.shape for k, v in batch.items()})
#二，定义模型
model = AutoModelForSequenceClassification.from_pretrained(
'bert-base-chinese',num_labels=2)
#三，训练模型
def compute_metrics(eval_preds):
logits, labels = eval_preds
preds = np.argmax(logits, axis=-1)
accuracy = np.sum(preds==labels)/len(labels)
precision = np.sum((preds==1)&(labels==1))/np.sum(preds==1)
recall = np.sum((preds==1)&(labels==1))/np.sum(labels==1)
f1 = 2*recall*precision/(recall+precision)
return {"accuracy":accuracy,"precision":precision,"recall":recall,'f1':f1}
training_args = TrainingArguments(
output_dir = "bert_waimai",
num_train_epochs = 3,
logging_steps = 20,
gradient_accumulation_steps = 10,
evaluation_strategy="steps", #epoch
metric_for_best_model='eval_f1',
greater_is_better=True,
report_to='none',
load_best_model_at_end=True
)
callbacks = [EarlyStoppingCallback(early_stopping_patience=10),
VLogCallback()] #监控指标同 metric_for_best_model
trainer = Trainer(
model,
training_args,
train_dataset=ds_train,
eval_dataset=ds_val,
compute_metrics=compute_metrics,
callbacks = callbacks,
data_collator=data_collator,
tokenizer=tokenizer,
)
trainer.train()
#四，评估模型
trainer.evaluate(ds_val)
#五，使用模型
from transformers import pipeline
model.config.id2label = {0:"差评",1:"好评"}
classifier = pipeline(task="text-classification",tokenizer = tokenizer,model=model.cpu())
classifier("挺好吃的哦")
#六，保存模型
model.save_pretrained("waimai_10k_bert")
tokenizer.save_pretrained("waimai_10k_bert")
classifier = pipeline("text-classification",model="waimai_10k_bert")
classifier(["味道还不错，下次再来","我去，吃了我吐了三天"])
公众号算法美食屋后台回复关键词：torchkeras，获取本文notebook代码和数据集下载链接~
万水千山总是情，点个赞赞行不行~😋
扫一扫
273
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
