centos7部署keepalived

最新推荐文章于 2024-11-02 06:00:00 发布

weixin_30535167

最新推荐文章于 2024-11-02 06:00:00 发布

阅读量114

点赞数

CC 4.0 BY-SA版权

文章标签：运维开发工具

原文链接：http://www.cnblogs.com/leiwenbin627/p/11511953.html

本文详细介绍了如何使用Keepalived配置高可用集群，包括安装Keepalived、修改配置文件、设置主备状态、接口、优先级、认证信息及虚拟IP地址等关键步骤。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

yum install keepalived -y
修改/etc/keepalived.conf配置文件，达到高可用状态
vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
   router_id MASTER     #主写MASTER，备写BACKUP
}
vrrp_instance VI_1 {
    state MASTER    #主写MASTER，备写BACKUP
    interface eth0    #本机的有效网卡
    virtual_router_id 51　 #高可用集群组里的id
    priority 100    #优先级权值，主的值比备的要高
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.108.200    #虚拟VIP
    }
}
 
systemctl start keepalived
systemctl enable keepalived
 