pg2.OperationalError: could not connect to server: Connection timed out (0x0000274C/10060)_psycopg2.operationalerror: could not connect to se-CSDN博客

本文详细介绍了在CentOS 6.5系统中停用iptables防火墙和SELinux的方法，包括检查SELinux状态、查看iptables规则、停止并永久禁用iptables服务等关键步骤。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

问题描述：

解决办法：

关闭selinux和服务器

具体步骤：

[root@localhost /]# getenforce
Disabled

[root@localhost /]# cat /etc/redhat-release
CentOS release 6.5 (Final)
[root@localhost /]# service iptables status
Table: filter
Chain INPUT (policy ACCEPT)
num target prot opt source destination
1 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:23
2 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:23
3 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
4 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0
5 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0
6 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22
7 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited

Chain FORWARD (policy ACCEPT)
num target prot opt source destination
1 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited

Chain OUTPUT (policy ACCEPT)
num target prot opt source destination

[root@localhost /]# service iptables stop
iptables: Setting chains to policy ACCEPT: filter [ OK ]
iptables: Flushing firewall rules: [ OK ]
iptables: Unloading modules: [ OK ]
[root@localhost /]# service iptables status
iptables: Firewall is not running.
[root@localhost /]# chkconfig --list |grep iptables
iptables 0:关闭 1:关闭 2:启用 3:启用 4:启用 5:启用 6:关闭
[root@localhost /]# chkconfig iptables off
[root@localhost /]# chkconfig --list |grep iptables
iptables 0:关闭 1:关闭 2:关闭 3:关闭 4:关闭 5:关闭 6:关闭
[root@localhost /]#

附图：