没有合适的资源?快使用搜索试试~ 我知道了~

21-S3-C2410A-032004
USER'S MANUAL
S3C2410A – 200MHz & 266MHz
32-Bit RISC
Microprocessor
Revision 1.0

S3C2410A
200MHz & 266MHz
32-BIT RISC
MICROPROCESSOR
USER'S MANUAL
Revision 1.0

Important Notice
The information in this publication has been carefully
checked and is believed to be entirely accurate at the
time of publication. Samsung assumes no
responsibility, however, for possible errors or
omissions, or for any consequences resulting from
the use of the information contained herein.
Samsung reserves the right to make changes in its
products or product specifications with the intent to
improve function or design at any time and without
notice and is not required to update this
documentation to reflect such changes.
This publication does not convey to a purchaser of
semiconductor devices described herein any license
under the patent rights of Samsung or others.
Samsung makes no warranty, representation, or
guarantee regarding the suitability of its products for
any particular purpose, nor does Samsung assume
any liability arising out of the application or use of any
product or circuit and specifically disclaims any and
all liability, including without limitation any
consequential or incidental damages.
"Typical" parameters can and do vary in different
applications. All operating parameters, including
"Typicals" must be validated for each customer
application by the customer's technical experts.
Samsung products are not designed, intended, or
authorized for use as components in systems
intended for surgical implant into the body, for other
applications intended to support or sustain life, or for
any other application in which the failure of the
Samsung product could create a situation where
personal injury or death may occur.
Should the Buyer purchase or use a Samsung
product for any such unintended or unauthorized
application, the Buyer shall indemnify and hold
Samsung and its officers, employees, subsidiaries,
affiliates, and distributors harmless against all claims,
costs, damages, expenses, and reasonable attorney
fees arising out of, either directly or indirectly, any
claim of personal injury or death that may be
associated with such unintended or unauthorized use,
even if such claim alleges that Samsung was
negligent regarding the design or manufacture of said
product.
S3C2410A – 200MHz & 266MHz 32-Bit RISC Microprocessor
User's Manual, Revision 1.0 (March 2004)
Publication Number: 21-S3-C2410A-032004
2004 Samsung Electronics
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any
form or by any means, electric or mechanical, by photocopying, recording, or otherwise, without the prior written
consent of Samsung Electronics.
Samsung Electronics' microcontroller business has been awarded full ISO-9001
certification (BSI Certificate No. FM24653). All semiconductor products are designed
and manufactured in accordance with the highest quality standards and objectives.
Samsung Electronics Co., Ltd.
San #24 Nongseo-Ri, Giheung- Eup
Yongin-City, Gyeonggi-Do, Korea
C.P.O. Box #37, Suwon 449-900
TEL: (82)-(031)-209-1934
FAX: (82)-(031)-209-1899
Home Page: http://www.samsung.com
Printed in the Republic of Korea

S3C2410A MICROPROCESSOR iii
Table of Contents
Chapter 1 Product Overview
Introduction.........................................................................................................................................1-1
Features .............................................................................................................................................1-2
Block Diagram ....................................................................................................................................1-5
Pin Assignments.................................................................................................................................1-6
Signal Descriptions......................................................................................................................1-20
S3C2410A Special Registers........................................................................................................1-26
Chapter 2 Programmer's model
Overview .............................................................................................................................................2-1
Processor Operating States .........................................................................................................2-1
Switching State...........................................................................................................................2-1
Memory Formats.........................................................................................................................2-1
Big-Endian Format.......................................................................................................................2-2
Little-Endian Format ....................................................................................................................2-2
Instruction Length........................................................................................................................2-2
Operating Modes .........................................................................................................................2-3
Registers ....................................................................................................................................2-3
The Program Status Registers ......................................................................................................2-7
Exceptions .................................................................................................................................2-10
Interrupt Latencies .......................................................................................................................2-15
Reset .........................................................................................................................................2-15

iv S3C2410A MICROPROCESSOR
Table of Contents (Continued)
Chapter 3 ARM Instruction set
Instruction Set Summay.......................................................................................................................3-1
Format Summary ........................................................................................................................3-1
Instruction Summary....................................................................................................................3-2
The Condition Field..............................................................................................................................3-4
Branch and Exchange (BX)...................................................................................................................3-5
Instruction Cycle Times................................................................................................................3-5
Assembler Syntax .......................................................................................................................3-5
Using R15 as an Operand ............................................................................................................3-5
Branch and Branch with Link (B, Bl)......................................................................................................3-7
The Link Bit ................................................................................................................................3-7
Instruction Cycle Times................................................................................................................3-7
Assembler Syntax .......................................................................................................................3-8
Data Processing..................................................................................................................................3-9
CPSR Flags................................................................................................................................3-11
Shifts .........................................................................................................................................3-12
Immediate Operand Rotates .........................................................................................................3-16
Writing to R15.............................................................................................................................3-16
Using R15 as an Operandy...........................................................................................................3-16
TEQ, TST, CMP and CMN Opcodes..............................................................................................3-16
Instruction Cycle Times................................................................................................................3-16
Assembler Syntax .......................................................................................................................3-17
Examples ...................................................................................................................................3-17
PSR Transfer (MRS, MSR)...................................................................................................................3-18
Operand Restrictions ...................................................................................................................3-18
Reserved Bits..............................................................................................................................3-20
Examples ...................................................................................................................................3-20
Instruction Cycle Times................................................................................................................3-20
Assembly Syntax ........................................................................................................................3-21
Examples ...................................................................................................................................3-21
Multiply and Multiply-Accumulate (MUL, MLA).......................................................................................3-22
CPSR Flags................................................................................................................................3-24
Instruction Cycle Times................................................................................................................3-24
Assembler Syntax .......................................................................................................................3-24
Examples ...................................................................................................................................3-24
Multiply Long and Multiply-Accumulate Long (MULL, MLAL)....................................................................3-25
Operand Restrictions ...................................................................................................................3-26
CPSR Flags................................................................................................................................3-26
Instruction Cycle Times................................................................................................................3-26
Assembler Syntax .......................................................................................................................3-27
Examples ...................................................................................................................................3-27
剩余598页未读,继续阅读
资源推荐
资源评论
2013-06-08 上传
154 浏览量

175 浏览量
147 浏览量
110 浏览量
2022-09-24 上传


147 浏览量
2007-11-12 上传
182 浏览量
160 浏览量
128 浏览量
171 浏览量
2022-04-01 上传
598 浏览量
资源评论


Qidi_Huang
- 粉丝: 533
上传资源 快速赚钱
我的内容管理 展开
我的资源 快来上传第一个资源
我的收益
登录查看自己的收益我的积分 登录查看自己的积分
我的C币 登录后查看C币余额
我的收藏
我的下载
下载帮助


最新资源
- 恒润自研3611板卡422协议的三个驱动
- mat资源包jdk版本1.8 windows系统
- 基于Plecs的PSFB全桥原边移相+副边同步整流ZVS仿真研究
- 五相SVPWM技术:基于4矢量+双空间调制的反电势正弦与非正弦五相电机矢量控制 - 矢量控制 文档
- 基于Ansys Maxwell与OptiSlang的永磁同步电机多目标尺寸优化研究及实践
- COMSOL中单个金纳米颗粒光热仿真的波动光学与固体传热研究及文章复现
- 基于模糊PID控制器的风力温度智能调节与优化仿真模型构建分析 实战版
- 基于ADM自适应增量调制算法的Matlab性能仿真:功能介绍及使用matlab2022a版本详解
- 基于PI控制的PMSM永磁同步电机Simulink建模与仿真实践教程 (2025-07-28)
- 自动售货机MCGS7.7与西门子S7-1200PLC联机程序博途V14:带注释与IO分配表
- 风光储微电网并网协同运行的MATLAB Simulink仿真研究
- 纯电动汽车Simulink仿真模型建模详细步骤与技巧
- 移相与调频控制在LLC谐振变换器中的联合应用:宽范围调压仿真研究及文献参考 · 宽范围调压仿真 宝典
- 遗传算法GA在综合能源系统储能容量配置中的双层优化模型应用 详解
- 共交直流母线多台逆变器并联三相并网运行环流分析及抑制策略(含五种仿真)
- Spring Boot日志配置详细指南
安全验证
文档复制为VIP权益,开通VIP直接复制
