物联网_嵌入式系统_MQTT协议_Nanode板_uIP协议栈_Arduino兼容_轻量级发布订阅_开源硬件_BSD许可证_网络...

Note that I am no-longer working on this codebase. ================================================== NanodeMQTT ---------- Implementation of [MQTT] for the [Nanode]. MQTT is a lightweight PubSub protocol. Nanode is an open source Arduino-like board that has in-built internet connectivity. It is licensed under the [BSD 3-Clause License]. Requirements ------------ * [NanodeUIP] - [uIP] stack for Nanode * [NanodeUNIO] - MAC address reading for Nanode Limitations ----------- - Maximum packet size is 127 bytes - Only QOS 0 supported Thanks to --------- * Nicholas O'Leary (Author of [PubSubClient] for Arduino) * Stephen Early (Author of [NanodeUIP]) [MQTT]: http://mqtt.org/ [Nanode]: http://nanode.eu/ [NanodeUIP]: http://github.com/sde1000/NanodeUIP [NanodeUNIO]: http://github.com/sde1000/NanodeUNIO [uIP]: http://en.wikipedia.org/wiki/UIP_(micro_IP) [Contiki]: http://www.contiki-os.org/ [PubSubClient]: http://knolleary.net/arduino-client-for-mqtt/ [BSD 3-Clause License]: http://www.opensource.org/licenses/BSD-3-Clause