基于FPGA的SPI协议实现工程源码

REV 1.2 according to Datasheet M25P16 REV 2.0 (24 November 2003) ======================================================================================= WARNING : These Verilog models are provided "as is" without warranty of any kind, including, but not limited to, any implied warranty of merchantability and fitness for a particular purpose. ======================================================================================= PROJECT ARCHITECTURE Parameter.v | TestBench.v |--------------> M25Pxx.v | |--------------> memory_access.v | |--------------> internal_logic.v | |--------------> acdc_check.v | |--------------> parameter.v | |--------------> M25Pxx_driver.v The project should be compiled in the following order : - parameter.v : define all constants - memory_access.v : perform read/write operations - internal_logic.v : describe internal working - acdc_check.v : check if timings respect datasheet. - m25pxx.v : external description of Serial Flash - m25pxx_driver.v : stimuli + library of operations example - testbench.v : a testbench example TECHNICAL SUPPORT For current information on M25Pxx products, please consult our pages on the world wide web: www.st.com/eeprom If you have any questions or suggestions concerning the matters raised in this document, please send them to the following electronic mail addresses: [email protected] (for application support) [email protected] (for general enquiries)