Scribd
Cargar
22 vistas

UinFingerUI RevisionNotes V4.5

Suprema Notas

Cargado por

makoko2910
Derechos de autor
© © All Rights Reserved
Nos tomamos en serio los derechos de los contenidos. Si sospechas que se trata de tu contenido, reclámalo aquí.
Formatos disponibles
Descarga como PDF, TXT o lee en línea desde Scribd
22 vistas

UinFingerUI RevisionNotes V4.5

Suprema Notas

Cargado por

makoko2910
Derechos de autor
© © All Rights Reserved
Nos tomamos en serio los derechos de los contenidos. Si sospechas que se trata de tu contenido, reclámalo aquí.
Formatos disponibles
Descarga como PDF, TXT o lee en línea desde Scribd
Está en la página 1/ 4

UniFinger UI

Software Revision Notes

Version 4.5

© 2009 by Suprema Inc.


UniFinger UI Software Revision Notes

Revision Notes
Software Version 4.5 2009-4-28

 SFM 4000 module is supported with its own I/O menu.

 Power Off button is added to Misc tab. It only works with a SFM 4000 module.

 Check Latent parameter is added for SFM3020-OP3 and SFM3520-OP3.

 Voltage Warning and PowerOff Timeout parameters added for SFM 4000
modules.

Software Version 4.4 2008-6-4

 COM10 and higher serial ports are supported.

 Enhanced Privacy and Fake Detection parameters are added to System window.

 Comm Test dialog is added to Misc tab. It is used for diagnosing communication
problems in SFM35x0 modules and BioEntry readers.

 Online HTML help is updated to Packet Protocol V2.8.

 The following bugs are fixed.

 You cannot add a command card in Wiegand window.

 Parity Definition tab in Wiegand window might show wrong information when
loading the configuration file of a custom format.

 User ID is displayed as a signed integer in Log window.

Software Version 4.3 2006-11-17

 Entrance Limit and Auth Type fields are added to User Level tab.

 Entrance Limit field is added to Smart Card tab.

© 2009 by Suprema Inc. 1


UniFinger UI Software Revision Notes

 Add Duress option is added to Advanced Enroll tab.

 Blacklist dialog is added to Misc tab.

 Template Type parameter is added to System window.

 Online HTML help is updated to Packet Protocol V2.7.

Software Version 4.2 2006-4-28

 TCP/IP configuration is added to Communication Setup dialog.

 Security level is displayed in user list.

 Admin tab is renamed User Level. You can set security level of a user in addition to
administration level.

 Custom Field section is added to Log window.

 Online HTML help is updated to Packet Protocol V2.6.

 The following bugs are fixed.

 File Save As dialog is opened as File Open dialog.

 With V1.6 firmware, some menus are disabled wrongly.

Software Version 4.1 2005-11-18

 Multiple templates can be selected for Verify Host and Enroll Template command.

 Template tab is added to Main window. In that window, users can scan/read/delete
templates.

 Reset is added to Misc window.

 Watchdog parameter is added to System window.

 Online HTML help is updated to Packet Protocol V2.5.

 The following bugs are fixed.

© 2009 by Suprema Inc. 2


UniFinger UI Software Revision Notes

 Scan Image does not work in firmware older than V1.3 in SFM 3000 series
modules.

 In some cases, the communication parameters are not updated even though
Search found them successfully in Communication Setup dialog.

 If the module is in network mode, Receive Only Mode does not work.

 In rare occasions, Calibrate and Delete All fail due to short timeout settings.

 Set Status in I/O window sends inverted signal to the module.

 The program does not work correctly in Windows 98/Me.

 User ID larger than 2G is displayed as a minus integer.

Software Version 4.0 2005-09-23

 Created.

© 2009 by Suprema Inc. 3

También podría gustarte