Contactor - Abb - Ficha Tecnica
Contactor - Abb - Ficha Tecnica
Información General
Tipo de producto extendido A16-30-10 220-230V 50Hz / 230-240V 60Hz
EAN 3471522050809
A16 contactors are mainly used for controlling 3-phase motors and generally for controlling
power circuits up to 690 V AC or 220 V DC. The contactors can also be used for many other
applications such as isolation, capacitor switching, lighting. The A... series 1-stack 3-pole
Descripción larga contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main
poles, 1 built-in auxiliary contact, front and side-mounted add-on auxiliary contact blocks -
Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of
accessories is available.
Clasificación
Cantidad mínima de 1 piece
pedido
© 2023 ABB. All rights reserved. 2023/09/22 Subject to change without notice
A16-30-10 220-230V 50Hz / 230-240V 60Hz 2
Descargas Populares
Ficha técnica, información 1SBC100122C0202_Ch02
técnica
Dimensiones
Ancho del product 44 mm
Technical
Número de contactos 3
principales NO
Número de contactos 0
principales NC
Número de contactos 1
auxiliares NO
Número de contactos 0
auxiliares NC
Normas Devices complying with international standards IEC 947-1 / 947-4-1, and
European standards EN 60 947-1 / 60 947-4-1. Electromagnetic compatibility
(EMC) acc. to amendment A11 to IEC 947-1, EN 60 947-1 and amendment 2
to IEC 947-4-1
© 2023 ABB. All rights reserved. 2023/09/22 Subject to change without notice
A16-30-10 220-230V 50Hz / 230-240V 60Hz 3
Corriente nominal de corta at 40 °C Ambient Temp, in Free Air, from a Cold State 10 s 140 A
duración Tensión baja (I cw at 40 °C Ambient Temp, in Free Air, from a Cold State 15 min 30 A
) at 40 °C Ambient Temp, in Free Air, from a Cold State 1 min 60 A
at 40 °C Ambient Temp, in Free Air, from a Cold State 1 s 300 A
at 40 °C Ambient Temp, in Free Air, from a Cold State 30 s 80 A
for 0.1 s 140 A
for 1 s 100 A
Capacidad de rotura cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 440 V 250 A
máxima cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 690 V 90 A
Tensión nominal 8 kV
soportada por impulsos (U
imp )
Capacidad de conexión Flexible with Cable End 0.75 ... 2.5 mm²
del circuito principal Rigid Cable 1 ... 4 mm²
Capacidad de conexión Flexible with Cable End 0.75 ... 2.5 mm²
del circuito auxiliar Rigid Cable 1 ... 4 mm²
Grado de protección acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP20
acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20
© 2023 ABB. All rights reserved. 2023/09/22 Subject to change without notice
A16-30-10 220-230V 50Hz / 230-240V 60Hz 4
Technical UL/CSA
Clasificación de uso (600 V AC) 30 A
general UL/CSA
Ambiente
Temperatura ambiente Close to Contactor Fitted with Thermal O/L Relay -25 ... 55 °C
Close to Contactor without Thermal O/L Relay (0.85 ... 1.1 Uc) -40 ... 55 °C
Close to Contactor without Thermal O/L Relay (Uc) -40 ... 70 °C
Close to Contactor for Storage -60 ... +80 °C
Resistencia climática acc. to IEC 60068-2-30 and 60068-2-11 - UTE C 63-100 specification II
Certificado CB CB_CN44759
Declaración de 2020980304001607
conformidad - CCC 2020980304001616
2020980304001229
Declaración de 1SBD250801U1000
conformidad - CE
Declaración de 1SBD250818U1000
conformidad - UKCA
© 2023 ABB. All rights reserved. 2023/09/22 Subject to change without notice
A16-30-10 220-230V 50Hz / 230-240V 60Hz 5
Certificado LR LRS_9830011E4
Certificado UL UL_20160205-E312527-10-2
Información de Embalaje
Embalaje Nivel 1 1 piece
Unidades
Clasificaciones
Código de clasificación de Q
objetos
UNSPSC 39121529
Categorias
© 2023 ABB. All rights reserved. 2023/09/22 Subject to change without notice
A16-30-10 220-230V 50Hz / 230-240V 60Hz 6
© 2023 ABB. All rights reserved. 2023/09/22 Subject to change without notice