Reviewed by 
Whether you have a cycling goal of gaining speed, fighting off fatigue, or breaking through a plateau, focusing on the quality of your cycling performance can help you get there. It all comes down to becoming more efficient on the bike.
When you improve efficiency, you’re not just riding smarter—you’re setting yourself up for consistent, measurable progress without needing to ride harder or longer. To enhance cycling performance and efficiency, you want to focus on three main factors of riding: mechanical, physiological, and environmental.
Think of mechanical advantages as riding with good equipment and proper positioning. If your gear is positioned in a way in which you can recruit more muscle fibers, allowing you to fatigue less quickly, you’ll ride longer and/or faster.
Physiological factors speak to setting your body and mind up for success at each ride.
As for the environment, it can be beneficial to optimizing the terrain, weather conditions, and dynamics of other riders if you are riding in a group. While mostly outside your control, you can zero in on a few key tips.
Keep in mind, big gains in speed don’t always require big miles and hard rides. Reflect on the little tweaks you can make in your current riding and training style to see where you can improve your efficiency to ride smarter—not harder.
To help you figure out what might be holding you back from a better cycling performance and more efficient rides, check out the six ways you may be robbing yourself of gains. Then, turn to the expert strategies for fixing these issues so you can boost your performance. Even if the tweaks seem small, they can lead to improved power and endurance that pays off in big performance gains.
6 Mistakes That Can Hold You Back from Better Cycling Performance
1. Poor Cleat Positioning
Cyclists who ride clipless have cleats on the bottoms of their shoes. Cleat position (where the cleat is screwed into the shoe) can be a key factor in comfort and muscle recruitment.
“Often times, I see cyclists who have their cleats placed all the way forward,” says Nikki Peterson, M.Ed., USA Cycling-certified coach with Source Endurance. “This engages calf musculature, and these muscles fatigue rather quickly, which then leads to heel drop. In this case, the rest of the kinetic chain suffers, and the rider will be unstable in the pelvis as one side is favored over the other.”
How to Take Control
Some cleats have a notch on the side to indicate where the cleat should line up with the part of your foot that sticks out the furthest laterally. Check for this when you’re applying your cleats to your shoes, and read more about how to install your cleats to you find the best position.
Hiring a professional bike fitter will allow for even further optimization of cleat position (and help you avoid other issues that might affect mechanics).
2. Your Saddle Height Is Too Low or Too High
The number and type of muscles recruited during a ride will partially dependent on your saddle height and position. Saddle height is like the alignment of a car—it affects your speed, power, and comfort. With the right adjustments, you’ll ride faster and stronger while using less energy.
“From a bike fit perspective, if someone’s saddle is too low, they’re not getting the whole usage and range of motion from their glutes in the power stroke,” explains professional bike fitter and USA Cycling-certified coach, Zack Allison. “If the saddle is too high, [it can] cause power to be absorbed by stretching the hamstring past its [ideal] range of motion.” This will ultimately affect your ability to ride at a cadence that’s most efficient for a required power output.
A study published in 2021 in Science Progress, investigated the effects of saddle height on cadence as it related to power efficiency. The researchers showed, through modeling software and equations, that saddle height affected cyclists’ ability to pedal at specific cadences.
A lower saddle height showed the cyclist would have an easier time riding at lower cadences, while the higher saddle height allowed for pedaling at a higher cadence. Within this model, 90 revolutions per minute (rpm) was found to be the most efficient cadence for overall energy cost to output ratio.
So in short, a saddle height which comfortably allowed the cyclist to ride at 90 rpm was shown to be the best height for pedaling efficiency and therefore energy output.
How to Take Control
This is another mechanical area which can easily be addressed with a professional bike fit and tweaking of saddle position and height. You can also follow our guide to finding the ideal saddle height for you.
3. You Stick to One Cadence
Different cadence speeds use different muscle groups. By regularly riding at a variety of cadence speeds, you are stimulating the use of a range of muscle groups and therefore, preventing fatigue of individual ones.
“When you spend [time] pedaling with a good bike fit, your proprioception, muscle synapses, and total musculature become more efficient in the pedal stroke and your power propels you forward more effectively,” says Allison. “Working on form, high and low cadence drills, and time at endurance pace can accelerate this efficiency gain.”
How to Take Control
Incorporate high cadence pedaling drills into your training. For example:
- 3-5 x 1-minute intervals at an easy effort, hitting 100 to 120 rpm
- 2 minutes rest at a comfortable cadence between intervals
You should also incorporate low cadence drills into your rides. For example
- 3-5 x 1-minute intervals at a moderate effort and 50 to 70 rpm
- 5 minutes rest at a comfortable cadence between intervals
Schedule rides or workouts with the intention of riding at cadences which are not your default (higher or lower depending on your preferred cadence speed). You can also try other cadence drills to continue working on getting comfortable at different rpms.
4. Ignoring Strength Work
Resistance training, usually in the form of weightlifting, can be a great way to increase muscle mass, build strength, prevent injury, and strengthen neuromuscular connections to ride more efficiently.
A review article published in the International Journal of Sports Physiology and Performance in 2016, explains that athletes who have more lower-body lean mass have higher one-second to 10-minute mean maximal power than athletes with less lower-body lean mass. Resistance training has been shown to increase lean body mass and muscle strength, as the authors point out.
One of the proposed mechanisms of action for this higher mean maximal power is more efficient use of type I or slow-twitch muscle fibers—those are important for endurance performance. In short, athletes who do resistance training and have relatively more lean mass in their lower bodies don’t need to activate highly fatigue-able muscle fibers (a.k.a. fast twitch) types as quickly.
Another proposed mechanism of action is that with resistance training, type IIx muscle fibers are converted into more fatigue-resistant type IIa muscle fibers, which may improve muscular endurance.
For cycling efficiency, it’s not only important to incorporate lower-body strength training into your routine, but core work too. One study published in the International Journal of Physiology, Nutrition, and Physical Education in 2018 found that a six-week core strength-training program improved the speed of 30 male, university-level cyclists in a 40-meter sprint test.
Authors of an article published in Current Sports Medicine Reports in 2010 also point to research that says a lack of core strength and stability can lead to inefficient technique on the bike, leading to increased risk of injury and detriments to performance.
When the core fatigues, it compromises alignment of the lower body, resulting in compromised power output, while a stable midsection allows for greater force through the pedals, per the article.
How to Take Control
Become more efficient at higher power output efforts with resistance training for both your lower body and core. Incorporate a leg day workout and core stability routine into your weekly schedule.
5. Not Eating or Drinking Enough
A cyclist’s ability to efficiently put out power during a ride will directly depend on how well fueled and hydrated they are going into and during the ride.
One of the most common and immediate symptoms of dehydration and under fueling is loss of mental alertness. This mental fatigue can cause cyclists to lose focus on their pedaling form and cadence speed. Both factors will lead to losses in efficiency while riding.
How to Take Control
The American College of Sports Medicine recommends 30 to 60 grams of carbohydrate per hour of exercise, and that athletes should start drinking early and at regular intervals to replace all the water lost through sweating.
Per this recommendation, try to drink about 17 ounces of fluid about two hours before exercise. Plus, you’ll want to load up on some carbs for energy before your ride. How much food you take in before and during your ride will depend on what type of ride you’re doing, so follow our guide to fueling for different distances.
When it comes to hydration, it’s important to understand how much water you need each day, which is different for everyone. Figure out your hydration strategy with tips from an expert and our handy hydration guidew.
6. Never Focusing on Group Riding Skills
Many cyclists lose the group, not because the other riders are stronger or more fit, but because the others have been riding more efficiently up to that point during the ride.
Major factors to consider when riding in a group of cyclists on the road or even gravel include where the wind is coming from, how many other riders are in the group, and how much surging is required to stay in the position you are riding. Understanding the relationship between power output, other riders, drafting, and the environment is complex.
How to Take Control
“If you want to be more efficient in a pack/peloton setting, then practice exactly that,” says Adam Mills, exercise physiologist, USA Cycling-certified coach and owner of Source Endurance. “There are so many nuances to riding efficiently in a bunch and while I could write a book about it, the best way to improve is to watch a veteran and practice what they do.”
Consider mixing in some group rides throughout your training and practice pack riding skills if you are working up to an event which is mass start and will require you to ride in a big group.
Riding in a group is all about energy conservation. Stay close to the wheel ahead, find the sweet spot in the draft, and you’ll save energy for the final push. It’s these strategies that win races.
Editor’s note: The writer of this story is also a coach with Source Endurance.
Kristen Arnold is a board-certified sports dietitian specializing in sports nutrition for women. She owns a private practice working with clients one-on-one and in group settings from the recreational to professional level in sport. She is also a Level 2 USA Cycling coach with Source Endurance LLC, a retired professional road cyclist of 7 years, and a current team sport director for domestic elite women's professional cycling team Wolfpack p/b ProBikeKit. Through all of these pursuits she fulfills her passion for enhancing the health and performance of active people and communities.
David Lipscomb is the Bicycling membership coach and owner of CIS Training Systems in New York City.
