Training Facility Norms and Standard Equipment Lists: Volume 1---Precision Engineering or Machining

Training Facility Norms and Standard Equipment Lists

VOLUME 1

PRECISION ENGINEERING OR MACHINING

Fook Yen Chong and Raymond Tay

DECEMBER 2018

Creative Commons Attribution 3.0 IGO license (CC BY 3.0 IGO)

© 2018 Asian Development Bank

6 ADB Avenue, Mandaluyong City, 1550 Metro Manila, Philippines

Tel +63 2 632 4444; Fax +63 2 636 2444

www.adb.org

Some rights reserved. Published in 2018.

ISBN 978-92-9261-454-6 (print), 978-92-9261-455-3 (electronic)

Publication Stock No. TCS189798-2

DOI: http://dx.doi.org/10.22617/TCS189798-2

The views expressed in this publication are those of the authors and do not necessarily reflect the views and policies of the Asian Development Bank (ADB) or its Board of Governors or the governments they represent.

ADB does not guarantee the accuracy of the data included in this publication and accepts no responsibility for any consequence of their use. The mention of specific companies or products of manufacturers does not imply that they are endorsed or recommended by ADB in preference to others of a similar nature that are not mentioned.

By making any designation of or reference to a particular territory or geographic area, or by using the term country in this document, ADB does not intend to make any judgments as to the legal or other status of any territory or area.

This work is available under the Creative Commons Attribution 3.0 IGO license (CC BY 3.0 IGO) https://creativecommons.org/licenses/by/3.0/igo/. By using the content of this publication, you agree to be bound by the terms of this license. For attribution, translations, adaptations, and permissions, please read the provisions and terms of use at https://www.adb.org/terms-use#openaccess.

This CC license does not apply to non-ADB copyright materials in this publication. If the material is attributed to another source, please contact the copyright owner or publisher of that source for permission to reproduce it. ADB cannot be held liable for any claims that arise as a result of your use of the material.

Please contact [email protected] if you have questions or comments with respect to content, or if you wish to obtain copyright permission for your intended use that does not fall within these terms, or for permission to use the ADB logo. Photos in this publication are property of ADB.

Notes:

In this publication, $ refers to United States dollars.

Corrigenda to ADB publications may be found at http://www.adb.org/publications/corrigenda.

Photos in this publication were taken by Fook Yen Chong for ADB, except where indicated.

Cover credits (left to right): Machine tools operation section. At a marine shipyard (photo by Abir Abdullah for ADB). Automotive repairs student. At a workshop in a TVET campus (photo by ADB). Welding and plasma cutting