Intelligent Technologies for Scientific Research and Engineering

Antenna Technologies for Wireless Communication Systems

M. Krishna Kumar¹, *, Kanagaraj Venusamy², M.C Madhu³

¹ Grace College of Engineering, Mullakkadu, Tuticorin, India

² Department of Engineering, University of Technology and Applied Sciences-AI Mussanah, AI Muladdha, Sultanate of Oman

³ Department of Mechanical Engineering, BMS Institute of Technology and Management, Bengaluru, India

Abstract

The receiving antenna is critical in an RF energy harvesting system because it collects energy from nearby radiating sources. The amount of harvestable energy is influenced by antenna characteristics such as gain, radiation pattern, and impedance bandwidth; therefore, choosing the correct receiving antenna is crucial. The microstrip patch antenna is a popular choice because of its low profile, low cost, and ease of manufacture. Many publications on microstrip patch antennas have been written over the years for various applications, such as mobile communications, radio frequency identification (RFID) and medical telemetry. We provide a folded shorted patch antenna for indoor mobile communication systems in this research. In recent years, there has been a lot of new work in the field of microstrip antennas, and it is one of the most active sectors in business communications. Mobile communications, wireless interconnects, wireless local area networks (WLANs), and cellular phone technologies are among the most rapidly increasing industrial areas today. A microstrip antenna is a popular option due to its light-weight, compact volume, low production cost, and ability to operate at dual and triple frequencies. Microstrip antennas, on the other hand, suffer from a number of disadvantages. A fundamental disadvantage of microstrip patch antennas is their small bandwidth.

Keywords: WSN, Applications, RFID, WLAN.

* Corresponding author M. Krishna Kumar: Grace College of Engineering, Mullakkadu, Tuticorin, India; E-mail: [email protected]

INTRODUCTION

In recent years, there has been a spike in interest in the implementation of wireless sensor networks (WSN). Structure monitoring, habitat monitoring, and healthcare are just a few of the uses for these network systems, which are made up of geographically spread sensor nodes. One emerging WSN application is precision

agriculture, in which sensor nodes are deployed in the field to monitor soil factors like moisture, mineral content and temperature. The information acquired by these sensors might be used to improve irrigation management, agricultural production forecasting and crop quality. Energy supply has been a key limiting factor in the lifetime of agricultural WSNs, since their sensors are often supplied by onboard batteries with limited energy ratings and lifespan. As a consequence, these batteries must be replaced right away. Labor and maintenance expenses may be expensive if the networks are deployed in difficult-to-service locations.

Before the worn-out batteries in a wireless soil sensor buried underground, for example, can be replaced, they must be unearthed. Furthermore, most wireless sensor batteries contain heavy metals that, if disposed of improperly, might harm the environment. Energy harvesting [1-5] is a possible alternative to batteries in which ambient energy is gathered, converted to electrical energy, and stored to wireless power sensors. In the literature, many energy harvesting systems have been reported, employing diverse energy sources, such as light, temperature difference, electromagnetic field, human power, and mechanical vibration. The operating environment and the wireless sensor's energy requirement are the most important factors to consider when selecting an energy harvesting system for a certain application. The main goal of this study is to create a wireless soil sensor network that can be utilized for detection and monitoring. In this network system, a number of wireless sensor nodes are positioned around the exterior of a property, as depicted. These nodes are usually static and may be found in the open, behind trees, or even buried in dry leaves or soil. The soil sensor uses roughly 29.4 J of energy throughout the course of 18 hours of operation. RF energy harvesting, in contrast to other energy collection methods, can not only be used to replenish the energy required to power the sensors, but it can also provide a more regulated and predictable power supply. This approach collects the RF energy released by a controlled transmitter using a receiving antenna linked to each wireless sensor node. The input energy is converted into a DC voltage using a power conversion circuit. The DC energy is stored in an energy storage device before being used to power the sensors [6-10].

In today's technology, flexible broadband antennas are in high demand, which is pushing up the need for broadband band antennas. However, when technology advances and new features of devices are introduced, the Broadband band Antenna need to be modified again. In recent years, rapid advances in communication technology have forced the development of antennas that are lightweight, low profile, high performance, and multi-band capable. Microstrip patch antennas may meet these requirements. Wideband and multi-band antennas are advised to avoid having to utilize several antennas for different operating frequencies. However, designing an antenna that can simultaneously cover Bluetooth, Wi-MAX, and WLAN frequencies, is a challenging task. Several distinct multi-band antenna designs have lately been proposed. To achieve multi-band operation, different planar monopole antennas employ complementary split-ring resonators, branch strip and hook-shape strips, branch strips and rectangular slit in the ground plane], circular arc-shaped strips and straight strips, and U-shaped strips. Planar inverted-F antennas (PIFAs) also give multi-band performance by altering the radiating components by adding slots that provide distinct resonance paths and hence several frequency bands. The coplanar inverted-F antenna's open arms and ground slots allow multi-band performance. There is also a tiny inverted-F antenna described, although it has a lot of cross-polarization. As a consequence, research into employing Micro-strip Antennas to achieve Broadband band Antenna operations is in great demand. Almost all work in the Broadband Antenna band has been surveyed