Scribd
Upload
38 views

HW Ion Optics Simul 2

The document asks the reader to use an online ion optics simulation program to design (a) an ion reflector and (b) an optic that turns ions 90 degrees upwards with minimal dispersion, using beam widths of 1 tick and beam angles of 1 tick. The reader is then asked to report whether these designs also work for beam widths/angles of 4/0 and 0/4 ticks, and explain why or why not, submitting screenshots of the simulations as the solution.

Uploaded by

Hossain
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
38 views

HW Ion Optics Simul 2

The document asks the reader to use an online ion optics simulation program to design (a) an ion reflector and (b) an optic that turns ions 90 degrees upwards with minimal dispersion, using beam widths of 1 tick and beam angles of 1 tick. The reader is then asked to report whether these designs also work for beam widths/angles of 4/0 and 0/4 ticks, and explain why or why not, submitting screenshots of the simulations as the solution.

Uploaded by

Hossain
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Problem Ion Optics Simulations Now we will deal with the more complex case of two-dimensional ion trajectories.

. Rather than programming it in Igor, this time you will use the ion optics simulation program from http://www.vias.org/simulations/simusoft_ionoptics.html , with 1 tick of beam width and 1 tick of beam angle, create (a) an ion reflector and (b) an optic that can turn the ions 90 degrees up, with as little ion dispersion as you can get (at the point in which the ions leave the box). Do those designs work for ion beams with 4/0 and 0/4 ticks ? (you dont need to optimize the designs to work for every case, it only needs to work for the 1/1 case and then you can report whether it works or not for the other cases and why). Pls submit the screen shots (Alt + PrintScreen in Windows) as the solution, along with any comments on tricks, problems etc.

You might also like