RAPID PROTOTYPING

O F D I G I TA L S Y S T E M S
SOPC EDITION
Table of Contents
1 Tutorial I: The 15 Minute Design______________________________ 2
1.1

Design Entry using the Graphic Editor _______________________________________ 9

1.2

Compiling the Design ____________________________________________________ 16

1.3

Simulation of the Design __________________________________________________ 17

1.4

Testing Your Design on an FPGA Board ____________________________________ 18

1.5

Downloading Your Design to the DE1 Board _________________________________ 19

1.6

Downloading Your Design to the DE2 Board _________________________________ 22

1.7

Downloading Your Design to the UP3 Board _________________________________ 25

1.8

Downloading Your Design to the UP2 or UP1 Board __________________________ 27

1.9

The 10 Minute VHDL Entry Tutorial _______________________________________ 29

1.10

Compiling the VHDL Design ______________________________________________ 32

1.11

The 10 Minute Verilog Entry Tutorial ______________________________________ 34

1.12

Compiling the Verilog Design______________________________________________ 36

1.13

Timing Analysis _________________________________________________________ 38

1.14

The Floorplan Editor_____________________________________________________ 39

1.15

Symbols and Hierarchy ___________________________________________________ 40

1.16

Functional Simulation ____________________________________________________ 41

1.17

Laboratory Exercises_____________________________________________________ 42

2 FPGA Development Board Hardware and I/O Features____________ 46

2.1

FPGA and External Hardware Features_____________________________________ 47

2.2

The FPGA Boards Memory Features_______________________________________ 48

2.3

The FPGA Boards I/O Features ___________________________________________ 49

2.4

Obtaining an FPGA Development Board and Cables __________________________ 53

3 Programmable Logic Technology______________________________ 56

3.1

CPLDs and FPGAs ______________________________________________________ 59

3.2

Altera MAX 7000S Architecture A Product Term CPLD Device _______________ 60

vi

Rapid Prototyping of Digital Systems

3.3

Altera Cyclone Architecture A Look-Up Table FPGA Device _________________ 62

3.4

Xilinx 4000 Architecture A Look-Up Table FPGA Device ____________________ 65

3.5

Computer Aided Design Tools for Programmable Logic _______________________ 67

3.6

Next Generation FPGA CAD tools _________________________________________ 68

3.7

Applications of FPGAs ___________________________________________________ 69

3.8

Features of New Generation FPGAs________________________________________ 69

3.9

For additional information _______________________________________________ 70

3.10

Laboratory Exercises ____________________________________________________ 71

4 Tutorial II: Sequential Design and Hierarchy ____________________ 74

4.1

Install the Tutorial Files and FPGAcore Library for your board ________________ 74

4.2

Open the tutor2 Schematic _______________________________________________ 75

4.3

Browse the Hierarchy____________________________________________________ 76

4.4

Using Buses in a Schematic _______________________________________________ 78

4.5

Testing the Pushbutton Counter and Displays _______________________________ 79

4.6

Testing the Initial Design on the Board _____________________________________ 80

4.7

Fixing the Switch Contact Bounce Problem__________________________________ 81

4.8

Testing the Modified Design on the FPGA Board _____________________________ 82

4.9

Laboratory Exercises ____________________________________________________ 83

5 FPGAcore Library Functions _________________________________ 88

5.1

FPGAcore LCD_Display: LCD Panel Character Display ______________________ 90

5.2

FPGAcore DEC_7SEG: Hex to Seven-segment Decoder _______________________ 92

5.3

FPGAcore Debounce: Pushbutton Debounce ________________________________ 94

5.4

FPGAcore OnePulse: Pushbutton Single Pulse ______________________________ 95

5.5

FPGAcore Clk_Div: Clock Divider_________________________________________ 96

5.6

FPGAcore VGA_Sync: VGA Video Sync Generation _________________________ 97

5.7

FPGAcore Char_ROM: Character Generation ROM_________________________ 99

5.8

FPGAcore Keyboard: Read Keyboard Scan Code ___________________________ 100

5.9

FPGAcore Mouse: Mouse Cursor _________________________________________ 102

5.10

For additional information ______________________________________________ 103

6 Using VHDL for Synthesis of Digital Hardware _________________ 106

6.1

VHDL Data Types _____________________________________________________ 106

6.2

VHDL Operators ______________________________________________________ 107

6.3

VHDL Based Synthesis of Digital Hardware ________________________________ 108

6.4

VHDL Synthesis Models of Gate Networks _________________________________ 108

Table of Contents

vii

6.5

VHDL Synthesis Model of a Seven-segment LED Decoder_____________________ 109

6.6

VHDL Synthesis Model of a Multiplexer ___________________________________ 111

6.7

VHDL Synthesis Model of Tri-State Output_________________________________ 112

6.8

VHDL Synthesis Models of Flip-flops and Registers __________________________ 112

6.9

Accidental Synthesis of Inferred Latches ___________________________________ 114

6.10

VHDL Synthesis Model of a Counter ______________________________________ 114

6.11

VHDL Synthesis Model of a State Machine _________________________________ 115

6.12

VHDL Synthesis Model of an ALU with an Adder/Subtractor and a Shifter ______ 117

6.13

VHDL Synthesis of Multiply and Divide Hardware __________________________ 118

6.14

VHDL Synthesis Models for Memory ______________________________________ 119

6.15

Hierarchy in VHDL Synthesis Models _____________________________________ 123

6.16

Using a Testbench for Verification ________________________________________ 125

6.17

For additional information _______________________________________________ 126

6.18

Laboratory Exercises____________________________________________________ 126

7 Using Verilog for Synthesis of Digital Hardware ________________ 130

7.1

Verilog Data Types _____________________________________________________ 130

7.2

Verilog Based Synthesis of Digital Hardware ________________________________ 130

7.3

Verilog Operators ______________________________________________________ 131

7.4

Verilog Synthesis Models of Gate Networks _________________________________ 132

7.5

Verilog Synthesis Model of a Seven-segment LED Decoder ____________________ 132

7.6

Verilog Synthesis Model of a Multiplexer ___________________________________ 133

7.7

Verilog Synthesis Model of Tri-State Output ________________________________ 134

7.8

Verilog Synthesis Models of Flip-flops and Registers _________________________ 135

7.9

Accidental Synthesis of Inferred Latches ___________________________________ 136

7.10

Verilog Synthesis Model of a Counter ______________________________________ 136

7.11

Verilog Synthesis Model of a State Machine_________________________________ 137

7.12

Verilog Synthesis Model of an ALU with an Adder/Subtractor and a Shifter _____ 138

7.13

Verilog Synthesis of Multiply and Divide Hardware __________________________ 139

7.14

Verilog Synthesis Models for Memory _____________________________________ 140

7.15

Hierarchy in Verilog Synthesis Models _____________________________________ 143

7.16

For additional information _______________________________________________ 144

7.17

Laboratory Exercises____________________________________________________ 144

8 State Machine Design: The Electric Train Controller_____________ 148

8.1

The Train Control Problem ______________________________________________ 148

viii

Rapid Prototyping of Digital Systems

8.2

Train Direction Outputs (DA1-DA0, and DB1-DB0) _________________________ 149

8.3

Switch Direction Outputs (SW1, SW2, and SW3) ____________________________ 150

8.4

Train Sensor Input Signals (S1, S2, S3, S4, and S5) __________________________ 150

8.5

An Example Controller Design ___________________________________________ 151

8.6

VHDL Based Example Controller Design __________________________________ 154

8.7

Verilog Based Example Controller Design__________________________________ 157

8.8

Automatically Generating a State Diagram of a Design _______________________ 160

8.9

Simulation Vector file for State Machine Simulation _________________________ 161

8.10

Running the Train Control Simulation ____________________________________ 162

8.11

Running the Video Train System (After Successful Simulation) ________________ 162

8.12

A Hardware Implementation of the Train System Layout_____________________ 164

8.13

Laboratory Exercises ___________________________________________________ 166

9 A Simple Computer Design: The P 3 _________________________ 170

9.1

Computer Programs and Instructions _____________________________________ 171

9.2

The Processor Fetch, Decode and Execute Cycle_____________________________ 172

9.3

VHDL Model of the P 3 ________________________________________________ 179

9.4

Verilog Model of the P 3 _______________________________________________ 182

9.5

Automatically Generating a State Diagram of the P3________________________ 186

9.6

Simulation of the P3 Computer__________________________________________ 187

9.7

Laboratory Exercises ___________________________________________________ 188

10 VGA Video Display Generation using FPGAs ___________________ 192

10.1

Video Display Technology _______________________________________________ 192

10.2

Video Refresh _________________________________________________________ 192

10.3

Using an FPGA for VGA Video Signal Generation __________________________ 195

10.4

A VHDL Sync Generation Example: FPGAcore VGA_SYNC _________________ 196

10.5

Final Output Register for Video Signals ___________________________________ 198

10.6

Required Pin Assignments for Video Output _______________________________ 198

10.7

Video Examples________________________________________________________ 199

10.8

A Character Based Video Design _________________________________________ 200

10.9

Character Selection and Fonts ___________________________________________ 200

10.10 VHDL Character Display Design Examples ________________________________ 203

10.11 A Graphics Memory Design Example _____________________________________ 206
10.12 Video Data Compression ________________________________________________ 207
10.13 Video Color Mixing using Dithering_______________________________________ 207

Table of Contents

ix

10.14 VHDL Graphics Display Design Example __________________________________ 208

10.15 Higher Video Resolution and Faster Refresh Rates ___________________________ 209
10.16 Laboratory Exercises____________________________________________________ 210

11 Interfacing to the PS/2 Keyboard and Mouse ___________________ 214

11.1

PS/2 Port Connections___________________________________________________ 214

11.2

Keyboard Scan Codes ___________________________________________________ 215

11.3

Make and Break Codes __________________________________________________ 215

11.4

The PS/2 Serial Data Transmission Protocol ________________________________ 216

11.5

Scan Code Set 2 for the PS/2 Keyboard_____________________________________ 218

11.6

The Keyboard FPGAcore ________________________________________________ 220

11.7

A Design Example Using the Keyboard FPGAcore ___________________________ 223

11.8

Interfacing to the PS/2 Mouse ____________________________________________ 224

11.9

The Mouse FPGAcore ___________________________________________________ 226

11.10 Mouse Initialization _____________________________________________________ 226

11.11 Mouse Data Packet Processing ____________________________________________ 227
11.12 An Example Design Using the Mouse FPGAcore_____________________________ 228
11.13 For Additional Information ______________________________________________ 229
11.14 Laboratory Exercises____________________________________________________ 229

12 Legacy Digital I/O Interfacing Standards ______________________ 232

12.1

Parallel I/O Interface____________________________________________________ 232

12.2

RS-232C Serial I/O Interface _____________________________________________ 233

12.3

SPI Bus Interface _______________________________________________________ 235

12.4

I2C Bus Interface _______________________________________________________ 237

12.5

For Additional Information ______________________________________________ 239

12.6

Laboratory Exercises____________________________________________________ 239

13 FPGA Robotics Projects ____________________________________ 242

13.1

The FPGA-bot Design ___________________________________________________ 242

13.2

FPGA-bot Servo Drive Motors____________________________________________ 242

13.3

Modifying the Servos to make Drive Motors ________________________________ 243

13.4

VHDL Servo Driver Code for the FPGA-bot ________________________________ 244

13.5

Low-cost Sensors for an FPGA Robot Project _______________________________ 246

13.6

Assembly of the FPGA-bot Body __________________________________________ 259

13.7

I/O Connections to the boards Expansion Headers __________________________ 266

13.8

Robot Projects Based on R/C Toys, Models, and Robot Kits ___________________ 267

Rapid Prototyping of Digital Systems

13.9

For Additional Information ______________________________________________ 275

13.10 Laboratory Exercises ___________________________________________________ 277

14 A RISC Design: Synthesis of the MIPS Processor Core ___________ 284

14.1

The MIPS Instruction Set and Processor ___________________________________ 284

14.2

Using VHDL to Synthesize the MIPS Processor Core ________________________ 287

14.3

The Top-Level Module __________________________________________________ 288

14.4

The Control Unit_______________________________________________________ 291

14.5

The Instruction Fetch Stage______________________________________________ 293

14.6

The Decode Stage ______________________________________________________ 296

14.7

The Execute Stage______________________________________________________ 298

14.8

The Data Memory Stage ________________________________________________ 300

14.9

Simulation of the MIPS Design ___________________________________________ 301

14.10 MIPS Hardware Implementation on the FPGA Board _______________________ 302

14.11 For Additional Information ______________________________________________ 303
14.12 Laboratory Exercises ___________________________________________________ 304

15 Introducing System-on-a-Programmable-Chip __________________ 310

15.1

Processor Cores________________________________________________________ 310

15.2

SOPC Design Flow _____________________________________________________ 311

15.3

Initializing Memory ____________________________________________________ 313

15.4

SOPC Design versus Traditional Design Modalities __________________________ 315

15.5

An Example SOPC Design _______________________________________________ 316

15.6

Hardware/Software Design Alternatives ___________________________________ 317

15.7

For additional information ______________________________________________ 317

15.8

Laboratory Exercises ___________________________________________________ 318

16 Tutorial III: Nios II Processor Software Development ____________ 322

16.1

Install the DE board files ________________________________________________ 322

16.2

Starting a Nios II Software Project ________________________________________ 322

16.3

The Nios II IDE Software________________________________________________ 324

16.4

Generating the Nios II System Library ____________________________________ 325

16.5

Software Design with Nios II Peripherals __________________________________ 326

16.6

Starting Software Design main() ________________________________________ 329

16.7

Downloading the Nios II Hardware and Software Projects ____________________ 330

16.8

Executing the Software__________________________________________________ 331

16.9

Starting Software Design for a Peripheral Test Program _____________________ 331

Table of Contents

xi

16.10 Handling Interrupts_____________________________________________________ 334

16.11 Accessing Parallel I/O Peripherals_________________________________________ 335
16.12 Communicating with the LCD Display (DE2 only) ___________________________ 336
16.13 Testing SRAM _________________________________________________________ 339
16.14 Testing Flash Memory___________________________________________________ 340
16.15 Testing SDRAM ________________________________________________________ 341
16.16 Downloading the Nios II Hardware and Software Projects ____________________ 346
16.17 Executing the Software __________________________________________________ 347
16.18 For additional information _______________________________________________ 347
16.19 Laboratory Exercises____________________________________________________ 348

17 Tutorial IV: Nios II Processor Hardware Design ________________ 352

17.1

Install the DE board files ________________________________________________ 352

17.2

Creating a New Project __________________________________________________ 352

17.3

Starting SOPC Builder __________________________________________________ 353

17.4

Adding a Nios II Processor _______________________________________________ 355

17.5

Adding UART Peripherals _______________________________________________ 358

17.6

Adding an Interval Timer Peripheral ______________________________________ 359

17.7

Adding Parallel I/O Components __________________________________________ 360

17.8

Adding an SRAM Memory Controller _____________________________________ 361

17.9

Adding an SDRAM Memory Controller ____________________________________ 362

17.10 Adding the LCD Module (DE2 Board Only) _________________________________ 362
17.11 Adding an External Bus _________________________________________________ 363
17.12 Adding Components to the External Bus ___________________________________ 364
17.13 Global Processor Settings ________________________________________________ 364
17.14 Finalizing the Nios II Processor ___________________________________________ 365
17.15 Add the Processor Symbol to the Top-Level Schematic _______________________ 366
17.16 Create a Phase-Locked Loop Component___________________________________ 367
17.17 Complete the Top-Level Schematic ________________________________________ 368
17.18 Design Compilation _____________________________________________________ 368
17.19 Testing the Nios II Project _______________________________________________ 369
17.20 For additional information _______________________________________________ 370
17.21 Laboratory Exercises____________________________________________________ 370

18 Operating System Support for SOPC Design ____________________ 374

18.1

Nios II OS Support _____________________________________________________ 376

xii

Rapid Prototyping of Digital Systems

18.2

eCos _________________________________________________________________ 377

18.3

C/OS-II _____________________________________________________________ 378

18.4

Clinux ______________________________________________________________ 379

18.5

Implementing the Clinux on the DE Board ________________________________ 380

18.6

Hardware Design for Clinux Support ____________________________________ 380

18.7

Configuring the DE Board_______________________________________________ 382

18.8

Exploring Clinux on the DE Board_______________________________________ 385

18.9

PS/2 Device Support in Clinux __________________________________________ 386

18.10 Video Display in Clinux ________________________________________________ 386

18.11 USB Devices in Clinux (DE2 Board Only) _________________________________ 387
18.12 Network Communication in Clinux (DE2 Board Only) ______________________ 387
18.13 For additional information ______________________________________________ 388
18.14 Laboratory Exercises ___________________________________________________ 388

Appendix A: Generation of Pseudo Random Binary Sequences _______ 391

Appendix B: Quartus II Design and Data File Extensions ____________ 393
Appendix C: Common FPGA Pin Assignments _____________________ 394
Appendix D: ASCII Character Code______________________________ 396
Appendix E: Common I/O Connector Pin Assignments ______________ 397
Glossary ____________________________________________________ 399
Index ______________________________________________________ 407
About the Accompanying DVD__________________________________ 411

http://www.springer.com/978-0-387-72670-0