Scribd
Upload
621 views1 page

Seals For Michelin Earthmover Tyres and Rims: Seals Description O-Ring

This document provides technical data on seals for Michelin earthmover tires and rims. It lists various O-rings and corner seals, including their designations, references, types, and remarks. The naming processes for O-rings and corner seals are then explained, with the O-ring name indicating section diameter and bead seat diameter, and corner seal name indicating profile and rim diameter. Approval must be obtained from Michelin for use of corner seals.

Uploaded by

Thiago Lisboa Guimarães
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
621 views1 page

Seals For Michelin Earthmover Tyres and Rims: Seals Description O-Ring

This document provides technical data on seals for Michelin earthmover tires and rims. It lists various O-rings and corner seals, including their designations, references, types, and remarks. The naming processes for O-rings and corner seals are then explained, with the O-ring name indicating section diameter and bead seat diameter, and corner seal name indicating profile and rim diameter. Approval must be obtained from Michelin for use of corner seals.

Uploaded by

Thiago Lisboa Guimarães
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TECHNICAL DATA EARTHMOVER TYRES

78
SEALS FOR MICHELIN EARTHMOVER TYRES AND RIMS
Name HEUPO Designation OR 6.6 - 20 OR 6.6 - 21 OR 2 - 25 Reference R 1681 R 1506 R 1438 C.A.I. 553 215 553 213 553 201 Type O-ring O-ring O-ring for tting 25 rim (3 pieces) for tting 12.00 R 24, 13.00 R 24,14.00 R 24 and 555/70 R 24 tyres on TG and SDC rim for 25 rim (5 pieces) and for 3 pieces CR rims (cranes) for 29 rim for 33 rim for 35 rim for 39 rim for 45 rim for 49 rim for 51 rim for 57 rim for 63 rim for C20 Pil X LC for tting TG tyres on 24 SDC rims for tting 12.00 R 24 XMINE D2 Remarks for tting 335/80 R 20, 375/75 R 20 405/70 R 20 and 425/75 R 20 tyre on SDC rim

SULLA SULKY STRIX STRAS FUODI HEYCO TYRAN LEMMERZ ICERU ICESY ICITA ICIVE ICALY ICIBI ICICO

OR 3 - 25 OR 3 - 29 OR 2 - 32 OR 3 - 33 OR 3 - 35 OR 3 - 39 OR 3 - 45 OR 3 - 49 OR 4 - 51 OR 4 - 57 OR 4 - 63 A 20 B 24/25 G 25 G 29 G 33 G 35 G 39 G 49 G 51

R 1437 R 1439 R 2052 R 1440 R 1441 R 1069 R 1580 R 1442 R 1479 R 1481 R 2053 R 1443 3886-6 R 1528 R 1237 R 1238 R 1239 R 1240 R 1233 R 1241 R 1242

553 200 553 202 553 055 553 203 553 204 553 206 553 214 553 205 553 210 553 211 553 056 553 004 800 098 553 021 553 012 553 013 553 014 553 015 553 011 553 016 553 017

O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring O-ring Corner seal Corner seal Corner seal Corner seal Corner seal Corner seal Corner seal Corner seal Corner seal Corner seal

SEALS DESCRIPTION O-RING:


Explanation of the sealing rings naming process: - OR: Abbreviation of O Ring - The rst number is the section diameter of the seal: - integer number: value expressed in 1/8 of inch (3 = 3/8) - decimal number: value expressed in mm (6.6 = 6,6 mm) - The second number is the nominal bead seat diameter, expressed in inches.

CORNER SEAL:
Explanation of the corner seals naming process: - The letter indicates the prole of the seal - The number is the nominal rim diameter, in inches.

NOTE: APPROVAL FOR USE OF CORNER SEALS MUST BE OBTAINED FROM MICHELIN.

You might also like