Scribd
Upload
118 views

Assignments

This document outlines 14 assignments related to environmental engineering topics including: 1) Primary, secondary, and tertiary water treatment methods. 2) Sedimentation, flotation, and computations for waste streams. 3) Definitions for terms like BOD, COD, TOC, TDS, and TSS. 4) Oxygen sag curves and expressions for biodegradable waste discharge. 5) The activated sludge process and factors that impact it. 6) Deriving an equation for microorganism concentration in activated sludge. 7) Trickling bed filters and their operation. 8) Water pollution from industries like distilleries, pulp/paper,

Uploaded by

Nilesh Nagose
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
118 views

Assignments

This document outlines 14 assignments related to environmental engineering topics including: 1) Primary, secondary, and tertiary water treatment methods. 2) Sedimentation, flotation, and computations for waste streams. 3) Definitions for terms like BOD, COD, TOC, TDS, and TSS. 4) Oxygen sag curves and expressions for biodegradable waste discharge. 5) The activated sludge process and factors that impact it. 6) Deriving an equation for microorganism concentration in activated sludge. 7) Trickling bed filters and their operation. 8) Water pollution from industries like distilleries, pulp/paper,

Uploaded by

Nilesh Nagose
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

AISSMS COLLEGE OF ENGINEERING DEPARTMENT OF CHEMICAL ENGINEERING Environmental Engineering Assignments

1. Explain primary. secondary and tertiary treatment methods 2. Explain Sedimentation & flotation 3. Compute the following for a waste generated by the formula C9N2H6O2 i) Carbonation Oxygen demand ii) Nitrogen Oxygen demand 4. Define the terms, BOD, COD, TOC, TDS & TSS 5. Explain O2 Sag Curve. Draw & label it. Derive an expression for critical time for biodegradable waste discharge in a river. 6. Discuss the application of least square method in the determination of BOD Constants, namely k & L 7. Explain the Activated sludge Process with a sketch and the significance of following a) Volumetric loading rate b) Food to microorganism ratio c) Hydraulic retention time d) Mean cell residence time e) Recycle ratio f) Mixed liquor suspended solids 8. Show that for a completely mixed activated sludge system, the concentration of microorganisms (X) is given by c (So Se) X = Y ------------------ (1 + c Kd) 9. Draw a neat sketch of trickling bed filter & explain its operation 10. Discus water pollution generated by following industries: 1) Distillery 2) Pulp & Paper 3)Tannery 4) Electroplating

11. What are the nine categories of water pollutant 12. Explain the composition of solid waste

13. Explain bio-composting, land filling and incineration methods for solid wastes. 14. Write notes on a) Chemical oxidation in disinfection of waste water b) Sludge treatment & disposal c) Aerobic and anaerobic lagoons d) Chemical oxidation in disinfection of waste water e) Nitrogen removal in waste water f) Adsorption process for waste water management h) Water pollution by population growth i) Activation Sludge process j) Acid Rain k) Ion exchange process in the tertiary treatment of wastewaters l) Incineration process in solid waste management

You might also like