Scribd
Upload
199 views1 page

Tek Stump Installation

The document provides instructions for installing concrete stumps. It states that the stump size should be appropriate for the footing size, and the height above ground should follow the specifications in the supplied table. It also notes that the stump embedment in the foundation material should be at least 30% of the stump length. Bracing is required if the stump height exceeds 15 times the minimum face width or if the embedding is less than 30% of the height above ground or 450mm, whichever is greater. A table is included with stump length recommendations based on pad size and safe bearing capacity of the founding soil.

Uploaded by

Tran Thi Bich Ngoc
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
199 views1 page

Tek Stump Installation

The document provides instructions for installing concrete stumps. It states that the stump size should be appropriate for the footing size, and the height above ground should follow the specifications in the supplied table. It also notes that the stump embedment in the foundation material should be at least 30% of the stump length. Bracing is required if the stump height exceeds 15 times the minimum face width or if the embedding is less than 30% of the height above ground or 450mm, whichever is greater. A table is included with stump length recommendations based on pad size and safe bearing capacity of the founding soil.

Uploaded by

Tran Thi Bich Ngoc
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TEK STUMP INSTALLATION

CERTIFICATE ACCREDITION NO.V06/02 Stump size shall be appropriate to footing size. The height above ground in accordance with table supplied. Stump embedment in foundation material should be at least 0.3 of the stump length.

INSTALLATION FOR CONCRETE STUMPS


FIXING BRACKET

LEGEND
SOIL BACKFILL

CONCRETE PAD

B See table below A = Height above ground B = Footing Depth C = Stump Width

STUMP BRACING
Where solid load bearing masonry walling is provided the floor may be assumed to be sufficiently braced. Bracing shall be provided where: Stump height above ground exceeds 15 times the minimum face width. Embedding in the foundation is less than 0.3 of the height above ground level or 450mm whichever is the greater.

STUMP LENGTH FOR PAD SIZE


SAFE BEARING CAPACITY OF FOUNDING SOIL (Kpa)

EFFECTIVE HEIGHT ABOVE GROUND (mm)


PAD SIZE PAD SIZE PAD SIZE PAD SIZE

230x230x100 75 stump 85 stump 2100 1800 1490

300x300x150 75 stump 1160 1000 820 85 stump 1490 1275 1080

350x350x200 75 stump 1000 870 700 85 stump 1290 1100 910

430x430x250 75 stump 820 710 575 85 stump 1050 900 740

75 100 150

1640 1400 1150

You might also like