Scribd
Upload
21 views

Fluid Coupling Type TVVS: The Innovative One

The document describes the innovative Fluid coupling type TVVS. It has an additional annular chamber in the coupling shell that enables further reduction of starting torque. During start-up, centrifugal forces cause the outer chamber to fill with operating fluid from the working circuit, filling it less than couplings without the annular chamber. This lessens the transmitted torque during motor run-up. The torque then gradually increases as the fluid empties from the delay chamber into the working circuit. The starting procedure can be adapted for different applications by adjusting nozzle screw diameters. This concept was originally designed for conveyor belt drives to gradually build torque and automatically adapt to belt loading conditions.

Uploaded by

Lazar Mihail
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
21 views

Fluid Coupling Type TVVS: The Innovative One

The document describes the innovative Fluid coupling type TVVS. It has an additional annular chamber in the coupling shell that enables further reduction of starting torque. During start-up, centrifugal forces cause the outer chamber to fill with operating fluid from the working circuit, filling it less than couplings without the annular chamber. This lessens the transmitted torque during motor run-up. The torque then gradually increases as the fluid empties from the delay chamber into the working circuit. The starting procedure can be adapted for different applications by adjusting nozzle screw diameters. This concept was originally designed for conveyor belt drives to gradually build torque and automatically adapt to belt loading conditions.

Uploaded by

Lazar Mihail
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

The innovative one Fluid coupling type TVVS

d1

l2

A L

Size

Type

d1 max. [mm] 100 120 130 140 150 160 180 180

d2 max. 80 90 110 120 135 150 160 180

l2 max. 135 155 170 200 240 265 280 320

Weight1) [kg] 83 128 185 301 454 696 1 010 1 478

422 487

TVVS TVVS TVVS TVVS TVVS TVVS TVVS TVVS

335 382 428 494 567 641 686 883

470 556 660 761 877 1 017 1 165 1 340

437 488 544 646 730 830 896 1 093

Type TVVS

562 650 750 866 1000 1150

1)

Weight with connecting coupling and max. oil filling.

The TVVS is a further Voith development in cooperating an annularchamber shell in addition to the enlarged delay chamber. The additional chamber in the coupling shell enables further reduction of the starting torque. During the initial rotations of the start-up procedure, centrifugal forces normally cause the outer chamber of the coupling to be completely filled with operating fluid from the working circuit.

In comparison with couplings without annular chamber, filling of the working circuit of a TVVS coupling is considerably reduced, which, in turn, lessens the torque transmitted during motor run-up. The increase in torque then follows a gradual emptying of the fluid from the delay chamber into the working circuit. The starting procedure can be adapted to the requirements of the

application by adjustable nozzle screws diameters. This new concept for couplings was designed originally for conveyor belt drives. Through the gradual build up of torque an automatic adaptation to belt load conditions is achieved.
Applications:
Q Q

Belt conveyors High-inertia machines 11

d2 D

You might also like