Scribd
Upload
57 views2 pages

QP Eg Iat 1

The document contains instructions for an engineering graphics exam for a class at University College of Engineering Kanchipuram. It includes 4 questions asking students to draw various views and shapes, including front, top, and side views; elevation, plan, and side views; a curve with a given focus-directrix distance and eccentricity; and an ellipse with given focus-directrix distance and eccentricity. The exam is for the mechanical engineering department, section B, and will take 1.5 hours.

Uploaded by

annamalai_s873323
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
57 views2 pages

QP Eg Iat 1

The document contains instructions for an engineering graphics exam for a class at University College of Engineering Kanchipuram. It includes 4 questions asking students to draw various views and shapes, including front, top, and side views; elevation, plan, and side views; a curve with a given focus-directrix distance and eccentricity; and an ellipse with given focus-directrix distance and eccentricity. The exam is for the mechanical engineering department, section B, and will take 1.5 hours.

Uploaded by

annamalai_s873323
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

UNIVERSITY COLLEGE OF ENGINEERING KANCHIPURAM (A Constituent College of Anna University Chennai) Karaipettai Village & Post, Kanchipuram 631552

Department of mechanical engineering


GE2111 Engineering Graphics SEM: I SECTION: B (3 x 15=45) TIME: 1.30 Hrs

1. Draw Front, Top and Side views of the following fig.

2. Draw Elevation, Plan and Side views of the following fig.

3. Draw a curve when the distance of focus from the directrix is equal to 35mm and eccentricity is 4/3.

4. Draw a ellipse when the distance of focus from the directris is equal to 35mm and eccentricity is 3/4.

UNIVERSITY COLLEGE OF ENGINEERING KANCHIPURAM (A Constituent College of Anna University Chennai) Karaipettai Village & Post, Kanchipuram 631552

Department of mechanical engineering


GE2111 Engineering Graphics SEM: I SECTION: B (3 x 15=45) TIME: 1.30 Hrs

1. Draw Front, Top and Side views of the following fig.

2. Draw Elevation, Plan and Side views of the following fig.

3. Draw a curve when the distance of focus from the directrix is equal to 35mm and eccentricity is 4/3.

4. Draw a ellipse when the distance of focus from the directris is equal to 35mm and eccentricity is 3/4.

You might also like