Scribd
Upload
36 views2 pages

08 802

This document contains a model question paper for an 8th semester civil engineering exam on steel structure design and drawing. It has two parts - Part A contains 2 short answer questions and Part B contains 2 long answer questions to choose from. The long answer questions involve designing steel structures like water tanks, trusses, plate girders, and stacks and preparing detailed drawings of the designs.

Uploaded by

oliviajason
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
36 views2 pages

08 802

This document contains a model question paper for an 8th semester civil engineering exam on steel structure design and drawing. It has two parts - Part A contains 2 short answer questions and Part B contains 2 long answer questions to choose from. The long answer questions involve designing steel structures like water tanks, trusses, plate girders, and stacks and preparing detailed drawings of the designs.

Uploaded by

oliviajason
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Model Question paper VIII SEMESTER BTECH DEGREE EXAMINATION, April 2012 (2008 scheme) Branch: CIVIL 08.

802: Time: 4hrs Answer all questions in part A and two questions from part B Assume suitable data wherever necessary. Use of steel tables, IS 800, Is 875,( 1,2 &3), IS 801, IS 804, IS 806, IS 1161, IS 6533 (2) are permited DESIGN AND DRAWING OF STEEL STRUCTURES (C) Max: 100 marks

PART A

( 2X10)

1. Design the inclined stag for a pressed steel tank of capacity 120 m3 2. Draw the cross section of a truss bridge and mark all the parts PART B (2X40)

3. a) Design a rectangular steel water tank for a capacity of 150,000litres. The height of coloumns above ground level is 10m. SBC of soil is 150kN/m2 b) prepare detailed drawings showing front elevation and plan of the tank and also the connection details of the tank plates.

OR 4. a) Design a tubular truss for a span of 9m using AC sheets. Trusses are provided at 3 m spacing. Wind pressure as per IS 875. Place kerala b) prepare a drawing of the truss designed with details of joint at ridge and at the base 5. a) Design a welded plate girder for a Bg main railway track for a span of 18m. Design the curtailment of the flange plate and also stiffeners. b) Draw to a suitable scale the longitudinal section, cross section and plan of the above designed bridge

OR 6 a) Design a self supporting steel stack for the following data. Height of the stack 80m, diameter- 4m, thickness of brick lining 100 mm and wind data. Height : 0-30 m 30-60 m 1.5kN/m2 60-80 m 1.6kN/m2

Wind pressure : 1.4kN/m2 b) Draw to a suitable scale : i) The sectional elevation

ii) Two sections of the above designed stack.

You might also like