Scribd
Upload
581 views

Acer BIOS Update Instructions

This document outlines the steps to update the system BIOS in DOS mode or Windows mode. In DOS mode, users boot to DOS and use Flash2M.bat to flash the BIOS, then reboot and enter BIOS setup to load defaults. In Windows, users open Command Prompt as Administrator and navigate to the BIOS update files to run WFlash2M.bat and flash the BIOS, then reboot the system. The document provides proprietary technical information owned by Acer Incorporated.

Uploaded by

Zachary Molina
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
581 views

Acer BIOS Update Instructions

This document outlines the steps to update the system BIOS in DOS mode or Windows mode. In DOS mode, users boot to DOS and use Flash2M.bat to flash the BIOS, then reboot and enter BIOS setup to load defaults. In Windows, users open Command Prompt as Administrator and navigate to the BIOS update files to run WFlash2M.bat and flash the BIOS, then reboot the system. The document provides proprietary technical information owned by Acer Incorporated.

Uploaded by

Zachary Molina
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

SystemBIOSUpdateSOP

SystemBIOSUpdate SOP

Date:Nov,2010

Thisdocumentcontainsproprietarytechnicalinformation,whichisthepropertyoftheAcerIncorporatedandshallnot bedisclosedtoothersinwholeorinpart,reproduced,copied,orusedasthebasisfordesign,manufacturing,orsaleof apparatuswithoutwrittenpermissionofAcerIncorporated. Theinformationinthisdocument,includingproductsandsoftwareversions,iscurrentasoftheReleaseDateabove.This documentissubjecttochangewithoutnotice.

1 of 6

SystemBIOSUpdateSOP

In[DOSMode]

1.1 PoweronSystemandBoottoDOS 1.2 KeyincdDosTool (GotoBIOSpathlikeA:\DOSTOOL) 1.3 KeyinFlash2M.batorFlash2M


2 of 6

SystemBIOSUpdateSOP
1.4 Press<Enter>andstarttoflashSystemBIOS

1.5 RebootsystemandPress<Del>toenterBIOSsetupmenu. 1.6 Loaddefaultsetting,andSave&Exit.

In[WindowsMode]
ByWindowscommandline 2.1RunCommandPromptasAdministratorinWindows.

3 of 6

SystemBIOSUpdateSOP

4 of 6

SystemBIOSUpdateSOP

Windows32bit

2.2.1 2.2.2

KeyincdWinTool\32(GotoBIOSpathlikeD:\WinTool\32) KeyinWFlash2M.batorWFlash2M

2.2.3 Press<Enter>andstarttoflashSystemBIOS

2.2.4

Rebootsystem

5 of 6

SystemBIOSUpdateSOP

Windows64bit
2.3.1 KeyincdWinTool\64(GotoBIOSpathlikeD:\ WinTool\64) 2.3.2 KeyinWFlash2M.batorWFlash2M

2.3.3 Press<Enter>andstarttoflashSystemBIOS

2.3.4 Rebootsystem

6 of 6

You might also like