Scribd
Upload
206 views

Portland Composite Cement TS EN 197-1 CEM II/A-M (P-L) 42,5 R

Portland composite cement CEM II/A-M (P-L) 42,5 R is used for general concrete applications requiring high strength, such as pavements, floors, buildings, bridges, and precast concrete products. It contains 6-20% additives like fly ash, slag, or limestone that provide moderate sulfate resistance. It has a lower heat of hydration than CEM I 42.5 R Portland cement. The cement meets the chemical and physical standards for initial setting time, soundness, compressive strength, and density outlined in EN 197-1. It should be protected from humidity and used within three months of production according to European standards.

Uploaded by

Tuhin Tahmid
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
206 views

Portland Composite Cement TS EN 197-1 CEM II/A-M (P-L) 42,5 R

Portland composite cement CEM II/A-M (P-L) 42,5 R is used for general concrete applications requiring high strength, such as pavements, floors, buildings, bridges, and precast concrete products. It contains 6-20% additives like fly ash, slag, or limestone that provide moderate sulfate resistance. It has a lower heat of hydration than CEM I 42.5 R Portland cement. The cement meets the chemical and physical standards for initial setting time, soundness, compressive strength, and density outlined in EN 197-1. It should be protected from humidity and used within three months of production according to European standards.

Uploaded by

Tuhin Tahmid
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

PORTLAND COMPOSITE CEMENT TS EN 197-1 CEM II/A-M (P-L) 42,5 R

THE USAGE OF CEM II / A-M (P-L) 42.5 R


It's used in general purpose application. It is generally used in works requiring high strength values. It's used in concrete include pavements, floors, reinforced concrete buildings, tunnel form applications, bridges, tanks, reservoirs, pipe, masonry units and precast concrete products. Moreover it's used in aggressive medium (including SO4, Cl-). It has moderate sulfate resistant properties because it contains no more than 8% tricalcium aluminate(C3A). The heat of hydration is lower than CEM I 42.5 R

PRODUCT INFORMATIONS
Standard Definition: It is a hydraulic binder. Portland composite cement is produced by grinding clinker and a certain amount of gypsum(CaSO4.2H2O) and a mixture of additive(%6-20) together.The gypsum is used in cement for regulation of the setting time. The additive which is used in cement can be selected according to the situation among the puzzolana, fly ash, blast furnace slag, silica fume, limestone, calcined shale. Content : [%80 Portland Cement Clinker + %14 Puzzolana (Trass) + % 6 Limestone] + %5 Gypsum CE No:
1784-CPD-0154

Standard Chemical Properties Sulphur trioxide (SO3) Chloride (Cl-) % 4,0 % 0,1

Standard Physical Properties Initial setting time Soundness 2 days compressive strength 7 days compressive strength 28 days compressive strength The other properties Specific Surface (Blaine) Density cm2/g ton/m3 60 min 10 mm 20,0 MPa 42,5 MPa 62,5 MPa

Our Products; Should be protected against humidity Should not be stowed in pile more than 10 bags Should not be kept in stock more than three months Should be used in accordance with EUROPEAN STANDARD
BURSA CEMENT FACTORY IS A MEMBER OF TURKISH CEMENT MANUFACTURERS ASSOC.

You might also like