Scribd
Upload
17 views

Alphabelt S3200: Radius Belts

This document summarizes the specifications of Radius Belts, which are modular conveyor belts that provide radius flexibility for conveyors with turns or spiral shapes. The minimum radius of the belt is determined by multiplying the belt width by either 1.7 or 2.5, depending on the width. The belt surface is a grid pattern with a pitch of 38.1 mm and 50% open area to allow drainage. Segments can be assembled in widths from 300 to 3000 mm with unlimited length. Motion is transmitted through plastic sprockets.

Uploaded by

Zoran Danilov
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
17 views

Alphabelt S3200: Radius Belts

This document summarizes the specifications of Radius Belts, which are modular conveyor belts that provide radius flexibility for conveyors with turns or spiral shapes. The minimum radius of the belt is determined by multiplying the belt width by either 1.7 or 2.5, depending on the width. The belt surface is a grid pattern with a pitch of 38.1 mm and 50% open area to allow drainage. Segments can be assembled in widths from 300 to 3000 mm with unlimited length. Motion is transmitted through plastic sprockets.

Uploaded by

Zoran Danilov
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

RADIUS BELTS

TYPE: GRID PG.


A modular conveyor belt with radius flexibility for conveyors with one or more turns and for conveyors with spiral shape. The radius is 1,7 belts width (R=width 1,7), when the belts width is 390 mm. When the width of the belt is bigger or smaller than 390 mm, the radius is 2,5 belts width (R=width 2,5). The radius (R) defines the smallest (internal) radius of the belt (drawing 4). Its surface is grid, flat and smooth and the pitch is 38,1 mm. The open surface of the belt is 50%, enabling the draining of water and gasses. The connection rod of the segments has diameter 6,4 mm. Assembling the segments to each other, you can create belts with width from 300 up to 3000 mm. and unlimited length. The motion tansmition is made by the plastic sprockets S3200. It has invariable and stable motion guided by the central sprockets on the two shafts.

ALPHAbelt S3200

drawing 1

3 9 0 8 1 1 9 1 , 8

drawing 2

60 24

drawing 3

3 ,1 8
drawing 4

Material Color

PP
blue-white

PE
white

AC
red

Traction power 25000 20000 30000 max(Nw/m belts width) Temperatu +5 - +105 -60 +65 -40 +85 re (oC) Open 50% surface Net weight 8,6 8,7 12,5 Kg/m2 For information on the resistance of the materials in chemicals, as well as on other useful instructions, please see the Plastic Specifications.

I =W

H DT

1,7

Page 64

You might also like