Scribd
Upload
47 views2 pages

Series: Incremental Shaft Encoder, High Resolution

This document provides specifications for the Series H incremental shaft encoder from Hohner, including: - Mechanical dimensions and specifications such as IP65 protection, 6000 RPM maximum, and axial/radial load limits. - Electronics specifications like 5-24V power supply, 40-80mA current draw, 40kHz-600kHz frequency, and -20/+60°C operating temperature range. - Ordering code breakdown including shaft size, output type, pulses, flange, and options. - Connection diagrams and pinouts for various output connectors.

Uploaded by

Iordache Bodean Raluca
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
47 views2 pages

Series: Incremental Shaft Encoder, High Resolution

This document provides specifications for the Series H incremental shaft encoder from Hohner, including: - Mechanical dimensions and specifications such as IP65 protection, 6000 RPM maximum, and axial/radial load limits. - Electronics specifications like 5-24V power supply, 40-80mA current draw, 40kHz-600kHz frequency, and -20/+60°C operating temperature range. - Ordering code breakdown including shaft size, output type, pulses, flange, and options. - Connection diagrams and pinouts for various output connectors.

Uploaded by

Iordache Bodean Raluca
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

www.hohner.

it

Series

Incremental shaft encoder, high resolution

H
Mechanics Data
Cover: Body: Solid shaft: Bearings: Weight: Protection: Rpm: Torque: Inertia: Shaft loading: Aluminium Aluminium Stainless steel 2, ballraces Approx.300gr. IP65 6000 Max 5Ncm 100gcm Axial 100N - Radial 100N (the value decrease when the number of pulses
increase)

Dimensions in mm.

Rev. 1.2

15/03/11

www.hohner.it

Series H
Output signals (cw)

Electronics Data
Power supply: Current consumption: Permissible load: Frequency: Protections: Operating Temp.: from 5 to 24V depends on the electronics circuit 40/80mA depends on the electronics circuit 40mA to 600KHz depends on the electronics circuit (100 KHz sinusoidal version) Against short circuit, reversal polarity -20/+60C (-30/+100C) on request 0/+60 sinusoidal version

Ordering code
Series H
Shaft
3 6 4 1 = 6mm = 8mm = 9.52mm = 10mm

* * * * *
Outputs

Pulses

(Max 36.000)

See page pulses

Flange
1 = 2 = see 3 = previous 4 = page 6 = M=

Connections

Options
0 = None 1 = High zero pulse Z = Synchronised zero Pulse to 180 only for Line Driver W= Synchronised zero Pulse to 90 only for Line Driver A = Special connections Y = Power supply 5/12V for output NPN/OC/PP U = Power supply 5/30V outputs PP Sin-Cos version S = 5 Volt T = 8/24 Volt

On request 2 = 12mm

2 = AB 3 = AB0 N = AB+AB P = AB0+AB0 B = AB C = AB0 G = AB H = AB0 5 = AB+AB 6 = AB0+AB0 8 = AB+AB 9 = AB0+AB0 S = AB+AB T = AB0+AB0 K = AB0+AB0 W = AB0+AB0 Y = AB0+AB0 CD+CD

PP11/28V 2 = 9414 Radial PP11/28V 0 = 9414 Axial PP11/28V 3 = Cable Radial PP11/28V 9 = Cable Axial OC11/28V 4 = 9418 Radial OC11/28V 6 = 9418 Axial NPN 11/28V 5 = 9416 Radial NPN 11/28V E = 9416 Axial LD5V 7 = 9419 Radial LD5V 8 = 9419 Axial LD5/12V B = 9415 Radial LD5/12V A = 9415 Axial LD15/24V(out 12V) N = 9413 Axial LD15/24V(out 12V) LD15/24 (out 5V) 1Vpp (Sin-Cos) 1Vpp (pulses)(Sin-Cos) 1Vpp (1 pulse)(Sin-Cos)

Option U: outputs levels compatible TTL Low level output <0.5V High level output > +VCC-1,9V

Connections
0 Volt Cable 5 Pole Cable 8 Pole Connector 9414 Connector 9416-9415-9413 Connector 9418 Connector 9419 White Black Pin1 Pin1 PinA PinA + Volt Brown Blue Pin2 Pin2 PinB PinB A Green Brown Pin3 Pin3 PinC PinC B Yellow Beige Pin4 Pin4 PinD PinD Pin5 PinE PinE Pin6 PinF PinF PinG Pin7 Green Yellow Pink A B 0 0 Gray Violet Pin5 Pin8 PinG PinH

Rev. 1.2

15/03/11

You might also like