0% found this document useful (0 votes)
210 views2 pages

CRC Evans RoliCradle

The RoliTM cradle by CRC-Evans is designed for transporting pipe during line travel operations. It uses multiple urethane rollers to evenly distribute pressure along the pipe, preventing damage caused by steel wheel cradles. The rollers can roll over weld seams without getting stuck. The cradle has an ample capacity for heavy wall pipe and can be disassembled for easy storage and transport. It is available in five size ranges to accommodate pipes from 6 to 60 inches in diameter.
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
210 views2 pages

CRC Evans RoliCradle

The RoliTM cradle by CRC-Evans is designed for transporting pipe during line travel operations. It uses multiple urethane rollers to evenly distribute pressure along the pipe, preventing damage caused by steel wheel cradles. The rollers can roll over weld seams without getting stuck. The cradle has an ample capacity for heavy wall pipe and can be disassembled for easy storage and transport. It is available in five size ranges to accommodate pipes from 6 to 60 inches in diameter.
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ROLITM CRADLE (For pipe sizes 6" (168mm) to 60" (1524mm)

The CRC-Evans RoliTM cradle is the ideal cradle for all line travel operations. Pipe damage caused by steel wheel cradles is eliminated. Pressure on the pipe is distributed evenly over multiple urethane rollers. This eliminates "egging" of the pipe. Urethane rollers ride easily over weld seams and do not hang up.

Easily disassembled for storage and transit. Ample capacity ensures safe handling of heavy wall pipe. Suitable also for use as a lowering-in or liftout cradle. Wrap around design ensures that the pipe "centers" in the cradle. Available in five ranges to accommodate pipe sizes 6" (168mm) through 60" (1524mm).

Page 1 of 2 CRC-Evans Pipeline Equipment

ROLITM CRADLE (For pipe sizes 6" (168mm) to 60" (1524mm)


SPECIFICATIONS
MODEL NO.
PCR 6-12 PCR 12-24 PCR 24-36 PCR 36-48 PCR 48-60

SIZE inches (mm)


6-12 (168-324) 12-24 (305-610) 24-36 (610-914) 36-48 (914-1219) 48-60 (1219 - 1524)

NUMBER OF ROLLERS PER STRING


10 14 12 16 18

RECOMMENDED MAX WORKING LOAD 5:1 SAFETY FACTOR (With two Strings) lb. (kg)
16293 (7676) 28662 (13001) 56500 (25628) 69389 (31474) 105380 (47800)

LENGTH* inches (mm)


42 (1067) 42 (1067) 56 (1422) 56 (1422) 56 (1422)

WIDTH* inches (mm)


22 (559) 36 (914) 60 (1524) 72 (1828) 84 (2134)

HEIGHT* inches (mm)


30 (762) 36 (914) 36 (914) 42 (1067) 48 (1219)

WEIGHT* lb (kg)
1135 (515) 1500 (680) 4960 (2250) 6425 (2914) 7240 (3284)

*Denotes dimensions collapsed for shipping purposes. Note: Each cradle has two (2) strings. Capacity: The capacities given in the table above are calculated with a safety factor of 5:1. Recalculate these capacities if your local laws or regulations allow a different safety factor.

Roli TM Cradles may be used with any size of side boom, but care must be taken not to exceed the recommended maximum working load of the Roli TM Cradles.

Page 2 of 2

You might also like