Scribd
Upload
79 views

Calculation of Environmental Conditions: Dewpoint & Rel. Humidity (ASTM E-337)

Calculate Environmental Conditions1

Uploaded by

Moustafa Bayoumi
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
79 views

Calculation of Environmental Conditions: Dewpoint & Rel. Humidity (ASTM E-337)

Calculate Environmental Conditions1

Uploaded by

Moustafa Bayoumi
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 4

3/9/2013

Calculation of Environmental Conditions

3:08 AM

Calculation of Environmental Conditions: Dewpoint & Rel. Humidity (ASTM E-337)

Date : Time : Location : Project : Tdry bulb Twet bulb Tsurface Bar. Pressure C C C 1,013.25 Millibars

Dewpoint = 0.0 C Relative Humidity = 100.0 % Tsurface - Dewpoint = 0.0 C

Relative Humidity < 85 Surface Temperature > 3 Surface Preparation and/or coating application is allowed?

% Maximum C above dewpoint NO

This calculation-method is based on the theoretical formulas for obtaining dewpoint and Relative Humidity from whirling hygrometer gauge readings and are considered to be more correct than disc or table -determinations. SCICON worldwide bvba cannot and shall not be held responsible for litigations resulting from the use of this calculation-method. Copyright 2009 SCICON worldwide bvba.

www.sciconworldwide.com [email protected]

Pagina 1

Instructions & Options-sheet:


This calculation-spreadsheet is designed to calculate the Dewpoint and Relative Humidity, from the Dry- and Wet-Bulb Temperatures, obtained from a whirling hygrometer (acc. to ASTM E-337) by using the theoretical formulas that define the relationship between all parameters. Step 1: Step 2: Step 3: Step 4: Step 5: (*) Step 6:

(*) = Optional Questions?

English Metric

Instructions & Options-sheet:


This calculation-spreadsheet is designed to calculate the Dewpoint and Relative Humidity, from the Dry- and Wet-Bulb Temperatures, obtained from a whirling hygrometer (acc. to ASTM E-337) by using the theoretical formulas that define the relationship between all parameters.
Select in which unit-system you want to work: Select what pressure-unit you wish to use: Define what the (usual) maximum Relative Humidity limit is where you work: Define how many degrees (C or F) the substrate-temperature should be above the dewpoint: Save this worksheet as a new template so you can easily run it with your own configurations Every-time you want to calculate the Dewpoint & Relative Humidity, use your new template to fill out the Dry Bulb-, Wet Bulb-, Surface-Temperature and possibly Barometric Pressure and your spreadsheet will instantly give you the governing Dewpoint, Relative Humidity and tell you if surface-preparation and/or coating-application is allowed. (Data can only be entered in white cells)

85 3

mailto:[email protected]

Millibars Pascal HPa mm Hg in.Hg

Humidity, (acc. to ASTM E-337) ters.


2 1

% C

You might also like