Scribd
Upload
76 views

Quality Assurance Plan

The quality assurance plan outlines checks to be performed on pins at various stages of production, including checking raw materials, machined pins, and finished pins. Dimensional, visual, and non-destructive testing checks will be performed on 100% of pins to ensure conformity with specifications in reference documents such as EN-9, ASTM A388, and component drawings. Records of lab tests, inspection reports, UT reports, and receiving inspection reports will provide evidence of acceptance.

Uploaded by

kanha15102003
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
76 views

Quality Assurance Plan

The quality assurance plan outlines checks to be performed on pins at various stages of production, including checking raw materials, machined pins, and finished pins. Dimensional, visual, and non-destructive testing checks will be performed on 100% of pins to ensure conformity with specifications in reference documents such as EN-9, ASTM A388, and component drawings. Records of lab tests, inspection reports, UT reports, and receiving inspection reports will provide evidence of acceptance.

Uploaded by

kanha15102003
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

RE-QA-INT-07

DOCUMENT NO

REV

QUALITY ASSURANCE PLAN [PIN]

Sr. No.

Component

Stage

Characteristics Category
Chemical & Physical Test

Type of Check
Lab Test Check Measure dimensions and Parallelism UT

Quantum of Check
One sample per cast no. 100 %

Reference Documents
EN-9

Acceptance Norms
EN-9

Format of Record
Lab TC

RE
R

TPI
R

AT vendors place Pins 1. [Raw Material] Inward [After Machining]

Dimensional and Visual

Inspection call

Inspection call

Inspection Report

N/A

NDT Semi Critical

100 %

ASTM A 388

ASTM A 388

UT report

N/A

Dimensional and Visual

Measure Dimensions

100 %

Component Drawing

Component Drawing

RIR

N/A

QA-INT-07

23.02.2013

AK

AK

DOCUMENT ID

PREPARED DATE

PREPARED BY

CHECKED BY

APPROVED BY

You might also like