A Major Project Report on

< Font Type: Arial, Bold, Font Size 13, Single line spacing >

Title of Project Report

< Font Type: Arial, Bold, Font Size 16, 1.5 line spacing >

Submitted to
< Font Type: Arial, Bold, Font Size 13, 1.5 line spacing >

RAJIV GANDHI TECHNICAL UNIVERSITY BHOPAL (M.P)

< Font Type: Arial, Bold, Font Size 13, Single line spacing >

In Partial fulfillment for the award of degree of

< Font Type: Arial, Bold, Font Size 13, Single line spacing >

BACHELOR OF ENGINEERING IN <BRANCH NAME>

< Font Type: Arial, Caps, Bold, Font Size 14, Single line spacing >

By
<Name, Enrollment No.>
< Font Type: Arial, Bold, Font Size 12>
(In TWO copies, which are to be submitted to the Department & College, Names of all batch mates along with Er No. are to be printed)

Under the Guidance of

< Font Type: Arial, italic, Font Size 12>

<Name of GUIDE> <Designation>

< Font Type: Arial, Bold, Font Size 12, Single line spacing>

< Arial 14>TRUBA COLLEGE OF SCIENCE & TECHNOLOGY < Arial 12>GANDHI NAGAR, BHOPAL-462036 (M.P.) < Arial 13>MAY-2013

(TCST)

SAGAR INSTITUTE OF SCIENCE AND TECHNOLOGY

(Approved by AICTE Delhi, Affiliated to RGTU Bhopal and Govt. of Madhya Pradesh)

NEAR AIRPORT, GANDHI NAGAR, BHOPAL-462036

Declaration
< Font Type: Arial, Italic, Font Size 16>

I hereby declare that the project entitled < PROJECT TITLE, BOLD > is the actual work carried out by me in the department of <NAME OF THE DEPARTMENT BOLD> under the guidance of <NAME OF THE GUIDE BOLD, Designation, Bold>.

(Name of the candidate) Enrollment Number

< Font Type: Arial, Bold, Italic, Font Size 12>

SAGAR INSTITUTE OF SCIENCE AND TECHNOLOGY

(Approved by AICTE Delhi, Affiliated to RGTU Bhopal and Govt. of Madhya Pradesh)

NEAR AIRPORT, GANDHI NAGAR, BHOPAL-462036

Declaration
< Font Type: Arial, Italic, Font Size 16>

We hereby declare that the project entitled <

PROJECT TITLE,

BOLD > is the actual work carried out by us in the department of <NAME OF THE DEPARTMENT BOLD> under the guidance of <NAME OF THE GUIDE BOLD, Designation, Bold>.

Name . . . . .

Enrollment Number
< Font Type: Arial, Bold, Font Size 12, 1.5 line spacing >

Signature .. .. .. .. ..

Note: This format is to be replaced with the individual Declaration in TWO common copies only, which are to be submitted to the Department & College.

SAGAR INSTITUTE OF SCIENCE AND TECHNOLOGY

(Approved by AICTE Delhi, Affiliated to RGTU Bhopal and Govt. of Madhya Pradesh)

NEAR AIRPORT, GANDHI NAGAR, BHOPAL-462036

CERTIFICATE
< Font Type: Arial, Italic, Font Size 16>

This is to certify that the project entitled

<TITLE BOLD>

has been carried out by <NAME OF THE STUDENT, BOLD>with <Enrollment Number, Bold>under my guidance in partial fulfillment for the award of (BACHELOR OF ENGINEERING) in (NAME OF THE BRANCH) by the Rajiv Gandhi Technical University, Bhopal (M.P.), during the academic year 2011-12.
(Name of the Head) Head Department of ------(Name of the Guide) Project Guide Designation

(Dr. S.S. Patil) Principal

SAGAR INSTITUTE OF SCIENCE AND TECHNOLOGY

(Approved by AICTE Delhi, Affiliated to RGTU Bhopal and Govt. of Madhya Pradesh)

NEAR AIRPORT, GANDHI NAGAR, BHOPAL-462036

CERTIFICATE
< Font Type: Arial, Italic, Font Size 16>

This is to certify that the project entitled has been carried out by

<TITLE BOLD>

<NAME OF THE STUDENT, BOLD>with <Enrollment Number, Bold> <NAME OF THE STUDENT, BOLD>with <Enrollment Number, Bold> <NAME OF THE STUDENT, BOLD>with <Enrollment Number, Bold> <NAME OF THE STUDENT, BOLD>with <Enrollment Number, Bold>

under my guidance in partial fulfillment for the award of (BACHELOR OF

ENGINEERING) in (NAME OF THE BRANCH) by the Rajiv Gandhi Technical University, Bhopal (M.P.), during the academic year 2012-13.

(Name of the Head) Head Department of -----(Dr. S.S. Patil) Principal

(Name of the Guide) Project Guide Designation

Note: This format is to be replaced with the individual CERTIFICATE in TWO common copies only, which are to be submitted to the Department & College.

ACKNOWLEDGEMENTS
< Font Type: Arial, Bold, Font Size 16>

Acknowledgement should be prepared by the candidates in their own wordings expressing their gratitudes to the following members as per the chronological order shown below.
< Font Type: Arial, Font Size 12>

Guide Head Principal, Dean, and Vice principal Any specific persons/organization to whom they want to express gratitude Department faculty members Lab technicians and other supporting staff Any others like friends, relatives etc.

(Name of the Candidate) Enrollment Number

Note: Instead of individual candidate name in the ACKNOWLEDGEMENTS,

the below format is to be used in TWO common copies only, which are to be submitted to the Department & College.

Name . . . . .

Enrollment Number
< Font Type: Arial, Bold, Font Size 12, 1.5 line spacing >

Signature .. .. .. .. ..

INDEX

Abstract List of Table List of Figures

(i)

(ii) (iii)

1. INTRODUCTION 1.1 GENERAL 1.2 .... ......... 1.2.1 1.2.2 1.3 1.4 2. . ...........

. . . . . . . . . . .. . . . . . . ..................

LITERATURE REVIEW
2.1 GENERAL 2.2. . . . . . . . . .

2.3 . 3. METHODOLOGY/EXPERIMENTATION 4. RESULTS AND DISCUSSION 5. CONCLUSIONS 6. REFERENCES

ABSTRACT
< Font Type: Arial, Bold, Font Size 14>

<Matter in Arial, font size-12>

LIST OF TABLES
< Font Type: Arial, Bold, Font Size 14>

<Matter in Arial, font size-12>

ii

LIST OF FIGURES
< Font Type: Arial, Bold, Font Size 14>

<Matter in Arial, font size-12>

ii i

The sequence in which the project report material should be arranged and bounded:
1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
11.

Cover Page & Title Page Declaration Certificate Acknowledgement Index Abstract List of Tables List of Figures Chapters Appendices
References

PAGE DIMENSION AND BINDING SPECIFICATIONS: The dimension of the project report should be in A4 size. The project report should be bounded using flexible cover with different colors specified department wise. The text on the cover page should be embossed with Golden Color & the text for printing should be identical. ME Department: EC Department: CS Department: IT Department: Navy Blue Dark Gray Black
Maroon

Margins

: Top Bottom Left Right

: : : :

1 (1 inch=2.54cm) 1.15 (2.86cm) 1.5 0.6

PREPARATION FORMAT: List of Tables The list should use exactly the same captions as they appear above the tables in the text. One and a half spacing should be adopted for typing the matter under this head.

List of Figures The list should use exactly the same captions as they appear below the figures in the text. One and a half spacing should be adopted for typing the matter under this head. List of References The listing of references should be typed 4 spaces below the heading REFERENCES in alphabetical order in single spacing left justified. The reference material should be listed in the alphabetical order of the first author. The name of the author/authors should be immediately followed by the year and other details. A typical illustrative list given below relates to the citation example quoted above.

References:
1.
Ariponnammal, S. and Natarajan, S. (1994) Transport Phenomena of

Sm Sel X Asx, Pramana Journal of Physics Vol.42, No.1, pp.421425.

2.
Barnard, R.W. and Kellogg, C. (1980) Applications of Convolution Operators to Problems in Univalent Function Theory, Michigan Mach, J.,

Vol.27, pp.8194.
3.

Shin, K.G. and Mckay, N.D. (1984) Open Loop Minimum Time Control of

Mechanical Manipulations and its Applications, Proc.Amer.Contr.Conf., San Diego, CA, pp. 1231-1236.

Note: Strictly follow the above format for References.

TYPING INSTRUCTIONS: The impression on the typed copies should be black in color. One and a half spacing should be used for typing the general text with justification on left & right i.e. justify the text with 1.5 spacing. The general text shall be typed in the Font style Arial and Font size 12. The heading text shall be typed in the Font style Arial Bold and Font size 14. The sub heading text shall be typed in the Font style Arial Bold, Italic and Font size 12. The numbering of the pages should be done at the middle of the bottom. PDF to Word