Scribd
Upload
269 views5 pages

Choke Manifold

The document provides an overview of maintenance procedures and testing for blowout preventer (BOP) equipment used in oil and gas drilling. It includes sections on the accumulator unit, annular and ram BOPs, drill string valves, choke and kill manifolds, auxiliary equipment, and BOP testing and drills. The choke manifold section notes that choke manifolds are used to control pressure loss or gain during well killing operations and that their design depends on factors like fluid type, upstream pressure, flow rates, velocities, and solids content.

Uploaded by

Tarun Ashok
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
269 views5 pages

Choke Manifold

The document provides an overview of maintenance procedures and testing for blowout preventer (BOP) equipment used in oil and gas drilling. It includes sections on the accumulator unit, annular and ram BOPs, drill string valves, choke and kill manifolds, auxiliary equipment, and BOP testing and drills. The choke manifold section notes that choke manifolds are used to control pressure loss or gain during well killing operations and that their design depends on factors like fluid type, upstream pressure, flow rates, velocities, and solids content.

Uploaded by

Tarun Ashok
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 5

Maintenance of Accumulator Unit & BOP Testing

Instruction for use First please go to slide show and than clik on the topic which you want to read.

Maintenance of Accumulator Unit & BOP Testing


CONTENTS
Accumulator Unit Annular BOP Ram BOP Drill String Valves Choke & Kill Manifold Auxiliary Equipment BOP Testing BOP Drills

TO WASTE PIT

CHOKE MANIFOLD
CHOKE MANIFOLD IS AN ARRANGEMENTS OF VALVES,LINES AND CHOKE. THE CHOKES ARE USED TO PR.LOSS/BACK PR.DURING KILLING. CREATE

DESIGN OF CHOKE MANIFOLD DEPENS UPON


a) b) c) d) e) Type of fluids( mud, oil, water or gas} Pressure Up-stream flow rates Down stream velocities Solids in the fluid flowing out of the well

> CHOKE MANIFOLD > KILL MANIFOLD >BLOW OUT PREVENTERS

>TRIPPING PRACTICE

You might also like