Scribd
Upload
31 views

High Performance Cable Assemblies Excellence in Interconnect Solutions

The document contains formulas and instructions for calculating various properties of cables and cable assemblies, including: - Mechanical length given degrees of bend - Velocity given dielectric constant - Dielectric constant given velocity - Delay given length - Mechanical length given delay - Electrical length in degrees given frequency and delay - Change in electrical length given ppm/temperature change - Phase given delay and frequency - Cutoff frequency given diameters - Impedance given diameters and velocity - Change in cable attenuation over temperature - Minimum power rating at altitude - Length of cable on a spool given dimensions

Uploaded by

abcdejkki
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
31 views

High Performance Cable Assemblies Excellence in Interconnect Solutions

The document contains formulas and instructions for calculating various properties of cables and cable assemblies, including: - Mechanical length given degrees of bend - Velocity given dielectric constant - Dielectric constant given velocity - Delay given length - Mechanical length given delay - Electrical length in degrees given frequency and delay - Change in electrical length given ppm/temperature change - Phase given delay and frequency - Cutoff frequency given diameters - Impedance given diameters and velocity - Change in cable attenuation over temperature - Minimum power rating at altitude - Length of cable on a spool given dimensions

Uploaded by

abcdejkki
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

EXCELLENCE IN INTERCONNECT SOLUTIONS High Performance Cable Assemblies

TO SOLVE FOR MECHANICAL LENGTH GIVEN DEGREES ENTER DEGREES 360.0 ENTER Er 1.50 ENTER FREQUENCY (GHz) 18.00 LENGTH = 0.53539 TO FIND VELOCITY GIVEN Er ENTER Er % VELOCITY = TO FIND Er GIVEN VELOCITY ENTER VELOCITY Er = TO FIND DELAY GIVEN LENGTH ENTER LENGTH (INCHES) ENTER Er DELAY = TO FIND MECHANICAL LENGTH GIVEN DELAY ENTER DELAY (NSEC) ENTER Er LENGTH = TO FIND ELECTRICAL LENGTH IN DEGREES ENTER FREQUENCY (GHz) ENTER DELAY (NSEC) LENGTH IN DEGREES = TO SOLVE FOR DELTA ELECTRICAL GIVEN PPM / C ENTER PPM / C -2.3 ENTER TEMPERATURE AT PPM ( C) 99 ENTER ELECTRICAL LENGTH IN (NS) 30 DELTA ELECTRICAL = -0.005244 TO FIND PHASE GIVEN DELAY ENTER DELAY (NSEC) ENTER FREQUENCY (Ghz) PHASE IN DEGREES = TO FIND CUTOFF FREQUENCY ENTER CENTER CONDUCTOR DIAMETER (INCHES) ENTER DIELECTRIC DIAMETER (INCHES) ENTER Er CUTOFF FREQUENCY = nsec TO FIND IMPEDANCE ENTER CENTER COND. DIAMETER (INCHES) ENTER DIELECTRIC DIAMETER (INCHES) ENTER VELOCITY IMPEDANCE Zo =

inches

1.50 81.6%

4.0856 18.0000 26474.6880

80.00% 1.563

12 1.5630 1.27108

0.02 0.064 2 63.2

0.8 1.5630 7.5526

0.05 0.161 0.7 49.1

inches TO FIND % CHANGE IN CABLE ATTENUATION OVER TEMPERATURE ENTER AMBIENT TEMPERATURE IN DEGREES C -25 % CHANGE FROM ATTENUATION AT 25 C = -10% degrees TO FIND % MINIMUM POWER RATING AT ALTITUDE ENTER ALTITUDE (IN 1,000 FEET) % OF SEA LEVEL POWER RATING =

18 0.000825 5.3460

TO FIND LENGTH OF CABLE ON SPOOL ENTER INSIDE ROLL DIAMETER ( INCHES) ENTER OUTSIDE DIA. OF CABLE ON SPOOL (INCHES) ENTER HEIGHT OF ROLL (INCHES) ENTER CABLE DIAMETER (INCHES) LENGTH OF CABLE IN FEET =

10 90%

4.00 8.00 5.90 0.116 1754

feet

nsec

nsec

Ghz

RATURE

You might also like