!***************************************************************!

!************* MOSTUSED *********************************!

!*************************************************************!
rxtcp:moty=rxotg,cell=lv0013c; ! find TG from CELL !
rxtcp:mo=rxotg-102; ! find cell from tg
rlcrp:cell=MT111c; ! status channels busy/idle rlslp !
rxcdp:mo=rxotg-188; ! tg configuration !
rxmsp:mo=rxocf-51,subord; ! check staste of cf !
rxmfp:mo=rxotrx-155-8; ! fault code !
rxmfp:mo=rxotx-34-8; ! fault on Radio !
rxmsp:mo=rxotrx-34-8,subord; ! status !
rxmsp:mo=rxocf-14;
rxmsp:mo=rxotrx-205-5,subord;
rxelp:mo=rxocf-110; ! error log print !
!**************************************************************************!
!************************ DIP / T1 **********************!
!***************************************************************************!
rxapp:mo=rxotg-42; ! list DIP from DEV devid by 24 to get dip !
radep:dev=RBLT3-3922; ! get SNT !
ntcop:snt=ETM3-3,dipinf; ! find dip info from snt !
dtstp:dip=67RB3; ! state of dip !
dtstp:dip=all,state=wo;
stdep:dev=rblt3-49&&-72;
dtqsr:dip=5ODP0,degr,unacc,sf; ! clear dip errors !
dtqsp:dip=110rb3; ! print quality sup obj for dip !
dtqup:dip=16RALT; ! quality !
dtbli:dip=137RB3; ! block dip !
dtble:dip=137RB3; ! de-block dip !
rapti:dev=RBLT24-762,sdev=0; ! tel ts for device !
rxmdp:moty=rxots,dev=RBLT24-762; ! time slots on device !
rxapi:mo=rxotg-60,dcp=287&&310,dev=rblt3-3744&&-3767; ! change T1 !
!**************************************************************************!
!******************** EDGEACTIVATION / DEACTIVATION *****************!
dtdip:dip=102rb3; ! get snt for dip !
ntcop:snt=ETM3-1;
!************************************************************************!
!***************** RADIO *******************!
!************************************************************************!
rxbli:mo=rxotrx-188-6,subord,force; ! block radio force !
Rxese:mo=rxotrx-188-6,subord; ! take out of service !
rxesi:mo=rxotrx-188-6,subord; ! put in service !
rxble:mo=rxotrx-188-6,subord; ! de-block radio !
rxcdp:mo=rxotg-188; ! status tg !
rxmfp:mo=rxotx-55-1; ! fault info !
rxmsp:mo=rxocf-14,subord;
rxmsp:mo=rxotrx-85-0,subord;
rxmsp:mo=rxotrx-129-3,subord; ! check state !
rxbli:mo=rxotrx-129-3; ! soft block !
rxtei:mo=rxotrx-129-3; ! test radio !
rxble:mo=rxotrx-129-3; ! soft de-block !
rxmop:mo=rxotrx-274-9; ! find sector of radio !
rxmoc:mo=rxotrx-181-1,mpwr=43; ! block & out make change in & deblock reload cf
!
rxmop:mo=rxotrx-120-0&-1&-2&-3&-4&-6&-8; ! find sector of trx !
rxmop:mo=rxotrx-94-0; ! check if EDGE site DCP2 will have many numbers
!
rapti:dev=RBLT24-762,sdev=0; ! tel ts for device !
rxmdp:moty=rxots,dev=RBLT24-762; ! time slots on device !
rxmop:mo=rxotg-60; ! Find SW version !
!**********************************************************************!

!************************ TS ******************************!
rxbli:mo=rxots-42-2-7; ! block !
rxlti:mo=rxots-42-2-7; ! test !
rxble:mo=rxots-42-2-7; ! de-block !
rxmsp:mo=rxots-107-8-6&&-7; ! status !
!***********************************************************************!
!********************* CF ******************************!
!***********************************************************************!
rxbli:mo=rxocf-24,force,subord; ! block !
rxese:mo=rxocf-24,subord; ! out of service !
rxesi:mo=rxocf-24,subord; ! in service !
rxble:mo=rxocf-24,subord; ! de-block !
rxcdp:mo=rxotg-24; ! MO configuration !
rxmfp:mo=rxocf-24; ! fault !
rxmsp:mo=rxocf-181; ! stat !
rxbli:mo=rxotf-45; ! TF !
rxtei:mo=rxotf-47; ! TF test !
rxble:mo=rxotf-45; ! TF !
!***********************************************************************!
!********************* TG *************************************!
!***********************************************************************!
rxmfp:mo=rxotg=102; ! fault !
rxmsp:mo=rxotg=102; ! status !
rxbli:mo=rxotg-19,subord; ! block !
rxese:mo=rxotg-19,subord; ! out of service !
rxesi:mo=rxotg-118,subord; ! in service !
rxble:mo=rxotg-118,subord; ! de-block !
!*************************************************!
!******** Find ROUTE using UPD ****************!
!*************************************************!
dtdip:dip=1648up5;
ntcop:snt=upetnam-1649,dipinf;
stdep:dev=updnam-39552&&-39575;
!*************************************************!
!*********** BLOCKING SUPERVISION ROUTES ****!
!**************************************************!
ALLIP:acl=a1;
allip:acl=a2;
allip:acl=strsp:r=all;
rrpar; ! corrects Transcoder pool config timeout !
strsp:r=IM7598O; ! status survey !
strdp:r=I47879I;
exdep:dev=BT4M-122;
ntcop:snt=ET4M-5,dipinf;
dtstp:dip=31RBLT; ! stat dip !
stdep:dev=BT4M-120&&-143; ! show status !
blodi:dev=UPDNAM-13845; ! block dev !
dtbli:dip=31RBLT; ! block dip !
dtidc:dip=31RBLT,lc=0,frs=0; ! dig path trans, init data, chanbge !
dtble:dip=31RBLT; ! de-block dip !
dtstp:dip=31RBLT; ! STATUS DIP !
dtbli:dip=31RBLT; ! block dig path !
dtidc:dip=31RBLT,lc=1,frs=1; ! dig path init data change !
dtble:dip=31RBLT; !de-block dig path !
dtstp:dip=31RBLT; ! dig path trans state print !
stdep:dev=updna51-5544&&-5567;
blode:dev=UPDNAM-13845; ! de-block devices !
stdep:dev=UPDNAM-13845;
ntstp:snt=etmaltm-37; ! stat snt !
ntbli:snt=snt; ! block snt !

ntble:snt=snt; ! de-block snt !

blori:r=xxxxxxx,blt=all; ! block route !
blore:r=xxxxxxx; ! de-block route !
seqar:r=; ! reset device !
!****************************************************************************!
================================================================================
================
Date & Time (Local) S Specific Problem Cause Mo-Reference
`
Finn Magnusson 2010-01-21 rev PA78 131/370
================================================================================
================
2008-11-28 00:06:57 m Loss of Synch Reference Redundancy replaceable_unit_proble
m Synchronization=1
2008-11-28 00:06:57 M TU Synch Reference Loss of Signal loss_of_signal Subrack=M
S,Slot=5,PlugInUnit=1,TimingUnit=1,TuSyncRef=1
2008-11-28 00:06:57 M TU Synch Reference Loss of Signal loss_of_signal Subrack=M
S,Slot=4,PlugInUnit=1,TimingUnit=1,TuSyncRef=1
2008-11-28 00:07:00 M Loss of Signal loss_of_signal
Subrack=MS,Slot=7,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=1
2008-11-28 00:07:12 M Rach_NbapMessageFailure call_establishment_error UtranCell
=Iub-3-2,Rach=1041
2008-11-28 00:10:40 M Plug-In Unit General Problem processor_problem_m3100 Subra
ck=MS,Slot=18,PlugInUnit=1
>>> Total: 6 Alarms (0 Critical, 5 Major)
Note: it is also possible to create MO groups with the commands hget/lhget, st/l
st, lk/llk, and
pdiff/lpdiff.
6.To check if GPRS is enabled or not:
rlgsp:cell=cellname;
7.To check the traffic:
rxtcp:moty=rxotg,cell=cellname;(get TG value)
rxmsp:mo=rxocf-TG No,subord;
8.Signalling and status of channel configuration:
rlcrp:cell=cellname;
9. To lock the site
rxbli:mo=rxocf-TG /CF No.,subord,force;
To unlock the site
rxble:mo=rxocf-TG /CF No.,subord;
10. To lock the TRX
rxbli:mo=rxotrx-TG /CF No.-trx.No.,subord,force;
To unlock the TRX
rxble:mo=rxotrx-TG /CF No.-trx.No.,subord;

11. To lock the time slot:

rxbli:mo=rxotrx-TG /CF No.-trx.No-Ts No,subord,force;
To unlock the time slot
rxble:mo=rxotrx-TG /CF No.-trx.No-Ts No,subord;
12. To find the Dip (ET) Status:

rxtcp:moty=rxotg,cell=cellname;(Get the TG value)

rxapp:mo=rxotg-TG No.(Get the RBLT value)
radep:dev=rblt-RBLT No;(Get the SNT value)
ntcop:snt=etrblt-SNT No;(Get the DIP No)
dtstp:dip=DIP No.;
13. To check configuration of the site:
rxmop:mo=rxotr-CF No-0&&-TRX No.;
14. To find the BTS internal alarms:
rxmfp:mo=rxocf-CF No;
rxmfp:mo=rxotrx-CF No-TRX No;
15. To refresh BTS through software:
rxese:mo=rxocf-CF No,subord;