Scribd
Upload
67 views3 pages

Regulated Power Supply

The document discusses building a variable regulated power supply using a LM7805 voltage regulator integrated circuit. It provides a simple circuit that takes an unregulated DC input between 9V and 24V and outputs a stable 5V supply. The LM7805 regulates the output voltage, provides overheating protection, and can supply up to 100mA of current. It is a basic but useful circuit for powering electronics projects and testing circuits.

Uploaded by

mailtoakhils
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
67 views3 pages

Regulated Power Supply

The document discusses building a variable regulated power supply using a LM7805 voltage regulator integrated circuit. It provides a simple circuit that takes an unregulated DC input between 9V and 24V and outputs a stable 5V supply. The LM7805 regulates the output voltage, provides overheating protection, and can supply up to 100mA of current. It is a basic but useful circuit for powering electronics projects and testing circuits.

Uploaded by

mailtoakhils
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

REGULATED POWER SUPPLY:

A variable regulated power supply, also called a variable bench power supply, is one where you can continuously adjust the output voltage to your requirements. Varying the output of the power supply is the recommended way to test a project after having double checked parts placement against circuit drawings and the parts placement guide. This type of regulation is ideal for having a simple variable bench power supply. Actually this is quite important because one of the first projects a hobbyist should undertake is the construction of a variable regulated power supply. While a dedicated supply is quite handy e.g. 5V or 12V, it's much handier to have a variable supply on hand, especially for testing. Most digital logic circuits and processors need a 5 volt power supply. To use these parts we need to build a regulated 5 volt source. Usually you start with an unregulated power To make a 5 volt power supply, we use a LM7805 voltage regulator IC (Integrated Circuit). The IC is shown below.

Fig 2.9(i) The LM7805 is simple to use. You simply connect the positive lead of your unregulated DC power supply (anything from 9VDC to 24VDC) to the Input pin,

connect the negative lead to the Common pin and then when you turn on the power, you get a 5 volt supply from the Output pin.

BLOCK DIAGRAM:

Fig 2.9(ii)

CIRCUIT DIAGRAM:

CIRCUIT FEATURES:

Brief description of operation: Gives out well regulated +5V output, output current capability of 100 mA

Circuit protection: Built-in overheating protection shuts down output when regulator IC gets too hot

Circuit complexity: Very simple and easy to build Circuit performance: Very stable +5V output voltage, reliable operation Availability of components: Easy to get, uses only very common basic components

Design testing: Based on datasheet example circuit, I have used this circuit successfully as part of many electronics projects

Applications: Part of electronics devices, small laboratory power supply Power supply voltage: Unregulated DC 8-18V power supply Power supply current: Needed output current + 5 mA Component costs: Few dollars for the electronics components + the input transformer cost

You might also like