Scribd
Upload
5K views1 page

Stirling Engine Mini Project-Abstract

The Stirling engine is a closed-cycle regenerative heat engine that converts heat into mechanical work through the compression and expansion of a gas. It uses a regenerator to transfer heat between the gas and engine to increase efficiency compared to steam engines. Originally used for industrial purposes in the 1800s, Stirling engines are now being explored for micro combined heat and power applications and utilizing waste heat sources like restaurant exhaust to power fans or turbines.

Uploaded by

Vishnu Pullanikkat
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
5K views1 page

Stirling Engine Mini Project-Abstract

The Stirling engine is a closed-cycle regenerative heat engine that converts heat into mechanical work through the compression and expansion of a gas. It uses a regenerator to transfer heat between the gas and engine to increase efficiency compared to steam engines. Originally used for industrial purposes in the 1800s, Stirling engines are now being explored for micro combined heat and power applications and utilizing waste heat sources like restaurant exhaust to power fans or turbines.

Uploaded by

Vishnu Pullanikkat
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ABSTRACT Stirling Engine

A Stirling engine is a heat engine operating by cyclic compression and expansion of air or other gas, the working fluid, at different temperature levels such that there is a net conversion of heatenergy to mechanical work. Or more specifically, a closed-cycle regenerative heat engine with a permanently gaseous working fluid, where closed-cycle is defined as a thermodynamic system in which the working fluid is permanently contained within the system, and regenerative describes the use of a specific type of internal heat exchanger and thermal store, known as the regenerator. It is the inclusion of a regenerator that differentiates the Stirling engine from other closed cycle hot air engines. Originally conceived in 1816 as an industrial prime mover to rival the steam engine, its practical use was largely confined to low-power domestic applications for over a century. The Stirling engine is noted for its high efficiency compared to steam engines, quiet operation, and the ease with which it can use almost any heat source. This compatibility with alternative and renewable energy sources has become increasingly significant as the price of conventional fuels rises, and also in light of concerns such as peak oil and climate change. This engine is currently exciting interest as the core component of micro combined heat and power (CHP) units, in which it is more efficient and safer than a comparable steam engine. As a part of our mini-project , we are visualizing the use of Stirling engine in various fields where waste energy is of large concern . Simply(say for eg;) , we can utilize the exhaust gas temperature from restaurant chimnnis itself for running the exhaust fan/turbine.

Group members: Vishnu P , Vipin P V , Vincent G Thomas , Vineeth C

You might also like