Scribd
Upload
244 views

Cera Plug

Cera Plug is a quick setting water leak plugging compound that is easy to use and adheres well to substrates. It sets within 1-2 minutes, has low heat release during curing, contains no chlorides, and gains a compressive strength of 28 MPa after 28 days. Cera Plug is mixed with water on site and applied by hand to stop water seepage in concrete structures like basements, buildings, pile caps, and underground areas.

Uploaded by

immanuel
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
244 views

Cera Plug

Cera Plug is a quick setting water leak plugging compound that is easy to use and adheres well to substrates. It sets within 1-2 minutes, has low heat release during curing, contains no chlorides, and gains a compressive strength of 28 MPa after 28 days. Cera Plug is mixed with water on site and applied by hand to stop water seepage in concrete structures like basements, buildings, pile caps, and underground areas.

Uploaded by

immanuel
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

Cera Plug

Quick setting water leak plugging


compound

CERA PLUG is a ready to use highly consistent, quick setting


compound.

ADVANTAGES:

• Easy to use single component material


• Excellent adhesion to the substrate
• Quick stoppage of water leakage
• Thermal cracking is less as it has low exothermic reaction
• Chloride content is nil

Cera Plug is also used for quick


FUNCTION stoppage of water leakages in
Cera Plug is an easy to use pile caps, underground sumps,
powder material consisting of tunnel linings, cement pipes,
blended cement, selected and mines.
aggregates & fillers and special
additives which reduces the METHOD OF APPLICATION:
thermal cracking because of its Cera Plug should be mixed with
low exothermic reaction. It is a 3 to 4 parts of water depending
quick setting compound, which upon the surface
requires only pure water for
mixing on any site conditions. conditions and stirred well using
metal trowels to attain uniform
USES consistency. The application is
Cera Plug being a single very easy such that it should be
component is very easy to use applied to the substrate
system manually by hand using rubber
gloves.
Cera Plug is used to stop water
seepage in concrete, basements PROPERTIES:
and buildings. Supply form : Powder
Chloride content : Nil
Initial setting @ 30oC : 1-2
minutes Resistance to Heat :
Excellent
Compressive Strength: 28
N/mm2
in 28 days @ 30oC

Note: Setting time given is


approx. and it may vary
according to different
temperatures. The
recommended application
temperature of Cera Plug is
15oC & above.

STORAGE
Cera Plug will retain its
properties for 6 months if kept
in sealed original dry bags.

PACKING
Available in 5 & 10kg Pack

PRECAUTIONS:
Any eye contamination should
be washed thoroughly with
plenty of water and immediate
medical treatment should be
sought. If contact with the skin
occurs wash with plenty of
water.

You might also like