HUMIDITY CONVERSION FORMULAS

Calculation formulas for humidity

B210973EN-C

PUBLISHED BY
Vaisala Oyj
P.O. Box 26
FI-00421 Helsinki
Finland

Phone (int.): +358 9 8949 1

Fax:
+358 9 8949 2227

Visit our Internet pages at www.vaisala.com

Vaisala 2011
No part of this document may be reproduced in any form or by any means,
electronic or mechanical (including photocopying), nor may its contents be
communicated to a third party without prior written permission of the copyright
holder.
This material is subject to copyright protection, with all copyrights retained by
Vaisala and its individual partners. All rights reserved. Any logos and/or
product names are trademarks of Vaisala or its individual partners. The
reproduction, transfer, distribution or storage of information contained in this
document in any form without the prior written consent of Vaisala is strictly
prohibited. All specifications technical included are subject to change
without notice.

________________________________________________________________________________

Table of Contents
1. Relative humidity definitions...............................................3
2. Water vapour saturation pressure......................................4
3. Calculation of dewpoint from RH........................................7
3.1 Calculation of dewpoint at different pressure .................7
3.2 Calculation of RH from dewpoint
and ambient temperature.........................................................8
4. Using psychrometers...........................................................9
5. Mixing ratio..........................................................................10
6. Enthalpy...............................................................................11
7. Absolute humidity ..............................................................12
8. Parts per million (ppm) ......................................................13
9. Enhancement factor ...........................................................15

1. Relative humidity definitions

Relative humidity is at all temperatures and pressures defined as the ratio of the water
vapour pressure to the saturation water vapour pressure (over water) at the gas
temperature:
RH=Pw/Pws*100%

(1)

The total pressure does not enter the definition. Above 100C the same definition is valid.
But as the saturation vapour pressure Pws is greater than 1013 hPa (normal ambient
pressure) the RH cant reach 100% in an unpressurised system.
Below 0C the definition is also valid. Here 100%RH is also impossible because
condensation will occur at a lower humidity than 100% (when the vapour is saturated
against ice).

VAISALA ________________________________________________________________________ 3

Humidity Conversion Formulas ________________________________________________________

2. Water vapour saturation pressure

The following formula gives the water vapour saturation pressure to sufficient accuracy
between 0C and 373C ( W. Wagner and A. Pru:" The IAPWS Formulation 1995 for the
Thermodynamic Properties of Ordinary Water Substance for General and Scientific Use ",
Journal of Physical and Chemical Reference Data, June 2002 ,Volume 31, Issue 2, pp.
387535):

T
Tc

Pws Tc
In
C1 C2 1.5 C3 3 C4 3.5 C5 4 C6 7.5

Pc T

(2)
(3)

= temperature in K

Pws = Saturation vapor pressure (hPa)

Tc

= Critical temperature, 647.096 K

Pc

= Critical pressure 220640 hPa

Ci

= coefficients,

C1

= -7.85951783

C2

= 1.84408259

C3

= -11.7866497

C4

= -22.6807411

C5

= -15.9618719

C6

= 1.80122502

4 ___________________________________________________________________ B210973EN-C

________________________________________________________________________________

Correspondingly the saturation water vapour pressure over ice at temperatures between
-100 and 0.01C can be calculated using:

T
Tn

(4)

Pwi
1.5
In
a1 1 1.25
a0 1
Pn

(5)

= temperature in K

Pn

= Vapor pressure at triple point temperature , 6.11657 hPa

Tn

= Triple point temperature 273.16 K

Pwi = Saturation vapor pressure (hPa)

ai

= coefficients,

a0

= -19.928169

a1

= 34.707823

If lower accuracy or a limited temprature range can be tolerated a simpler formula can be
used for the water vapour saturation pressure over water (and over ice):
Pws=A*10(m*T/(T+Tn))

(hPa), where

(6)

A,m,Tn=constants see table 1

T = Temperature (C)

VAISALA ________________________________________________________________________ 5

Humidity Conversion Formulas ________________________________________________________

Temperature range(C)

Tn

max error

-20 ... 50

6.1162

7.5892

240.71

0.09%

50 ... 100

5.9987

7.3313

229.1

0.01%

100 150

5.8493

7.2756

225

0.01%

150 200

6.2301

7.3033

230

0.01%

200 350

10.20614

7.364473

262.76

0.59%

0 200

6.0964

7.33354

230.5

0.38%

6.1134

9.7911

273.47

0.05%

over water:

Over ice:
-70 0

Table 1. Constants for formula 6.

6 ___________________________________________________________________ B210973EN-C

________________________________________________________________________________

3. Calculation of dewpoint from RH

Calculate Pws using formula (3) or (6)
Calculate Pw=Pws*RH/100 (in hPa!)
Calculate Dewpoint using formula (7):

Td

Tn

1
Pw
10 log

(7)

The constants in formula (7) are the same as for formula (6).
Example:
The ambient temperature is 40 C and the RH is 50%. Calculate Td:
Pw=Pws(40C)*50/100=36.88 hPa
Td=237.3/(7.5/10log(36.88/6.1078)-1)=27.6 C

3.1 Calculation of dewpoint at different pressure

1. Calculate Pws using formula (3) or (6)
2. Calculate measured vapor pressure (at measurement pressure)
Pw meas Pws

RH
100

(8)

3. Multiply with pressure ratio:

Pw pres

Ppres
Pw meas
Pmeas

(9)

VAISALA ________________________________________________________________________ 7

Humidity Conversion Formulas ________________________________________________________

4. Calculate Dewpoint at process pressure:

Td pres

Tn

1
10 Pw pres
log A

(10)

3.2 Calculation of RH from dewpoint and ambient

temperature
RH 100%

Pws(Td)
Pws(Tambient)

(11)

Pws may be calculated using formulas (3) or (6). If the simplified formula (6) is used the
expression for RH may be further simplified to:

RH 100% 10

Td
Tambient
m

Td Tn Tambient Tn

(12)

Values for the constants M and Tn for the appropriate temperature range can be found in
table 1.

8 ___________________________________________________________________ B210973EN-C

________________________________________________________________________________

4. Using psychrometers
The drybulb-temperature Tdry and the wetbulb-temperature Twet can be converted into Pw
using formula (13):
Pw=Pws(Twet) - Ptot*K*(Tdry - Twet) ,where

(13)

Pws

Water vapour saturation pressure from formula (6)

Ptot

Total ambient pressure

Psychrometer constant 0.000662 C-1

When Pw is known RH can be calculated using (1) or Td can be calculated using (7)
Example:
Twet is 38.5C, Tdry=40.0C and the ambient pressure is 1013 hPa. Calculate RH and Td:
Pws(38.5C)=68.05 hPa
Pws(40.0C)=73.75 hPa
Pw=68.05 - 1013*0.000662*(40.0-38.5)=67.04 (hPa)
RH=67.04/73.75*100 =90.9%
Td=237.3/(7.5/10log(67.04/6.1078)-1=38.22 C

VAISALA ________________________________________________________________________ 9

Humidity Conversion Formulas ________________________________________________________

5. Mixing ratio
The mixing ratio (mass of water vapour/mass of dry gas) is calculated using (14):
X=B*Pw/(Ptot-Pw)

[g/kg]

,where

(14)

B=621.9907 g/kg
The value of B depends on the gas. 621.9907 g/kg is valid for air.
In general the constant can be calculated using:
B=M(h2o)/M(gas)*1000

[g/kg]

,where

(15)

M(h2o) = molecular weight of water

M(gas)

= molecular weigth of gas

For instance for hydrogen we get

B=18.015/2.016*1000=8936 g/kg
Example:
The dewpoint Td is 40C and the total ambient pressure Ptot is 998 hPa. Calculate mixing
ratio:
Pw=Pws(40C)=73.75 hPa
X=621.9907*73.75/(998-73.75)=49.63 g/kg
(To obtain the mixing ratio in units of grains/pound use B=4354 [grains/pound])

10 __________________________________________________________________ B210973EN-C

________________________________________________________________________________

6. Enthalpy
Enthalpy can be calculated from mixing ratio using (16):
h=T*(1.01 + 0.00189X) + 2.5X

(kJ/kg)

,where

(16)

T = temperature (C)
X = mixing ratio (g/kg)

To convert to Btu/lb divide by 2.324

Note that a different base temperature for zero enthalpy , 0F is often used together with
the Btu/lb unit.
Example:
The ambient temperature is 20C and the relative humidity is 50%. Calculate enthalpy:
Pw=Pws(20C)*50/100=11.69 hPa
X=621.9907*11.69/(1013-11.69)=7.26 g/kg
h=20*(1.01 + 0.00189*7.26) + 2.5*7.26=38.62 kJ/kg

VAISALA _______________________________________________________________________ 11

Humidity Conversion Formulas ________________________________________________________

7. Absolute humidity
Absolute humidity is defined as the mass of water vapour in a certain volume. If ideal gas
behaviour is assumed the absolute humidity can be calculated using (17):
A=C*Pw/T

,where

(17)

= constant 2.16679 gK/J

Pw =
T

(g/m3)

vapour pressure in Pa

temperature i K

Example:
The ambient temperature is 20C and the relative humidity is 80%. Calculate absolute
humidity:
Pw=Pws(20C)*80/100=18.7 hPa
A=2.16679 *1870/(273.16+20)=13.82 g/m3

12 __________________________________________________________________ B210973EN-C

________________________________________________________________________________

8. Parts per million (ppm)

Parts per million values are usually given vs. the amount of dry air:
I: Volume/volume PPMv(dry):
PPM v

Pw
10 6
Ptot Pw

(18)

Where
Pw

= water vapour pressure

Ptot = total pressure

II: Mass/mass PPMm(dry)

PPM m

M w Pw
10 6
M d (Ptot Pw )

Mw
0.62199
Md

(19)

Where
Pw

= Water vapour pressure

Ptot = Total pressure

Mw = Molecular mass of water
Md

= Molecular mass of dry air

From wet air:

III: Volume/volume PPMv(wet):

VAISALA _______________________________________________________________________ 13

Humidity Conversion Formulas ________________________________________________________

PPM v

Pw 6
10
Ptot

(20)

IV: Mass/mass PPMm(wet)

PPM m

M w Pw 6
10
M d Ptot

Mw
0.62199
Md

(21)

Example:
The dewpoint is 7C and the total pressure is 998 hPa calculate PPMv(dry).
By using formula (6) we get Pws(7C)=10.02 hPa. Now

PPM v

10.02
10 6 10142
(998 10.02)

14 __________________________________________________________________ B210973EN-C

________________________________________________________________________________

9. Enhancement factor
The water vapour saturation pressures described in paragraph 2 are exactly valid only in
vacuum (water vapour is the only gas present). If other gases are present the real
saturation vapour pressure Pws will increase. For ambient pressure and lower pressures
this effect is typically ignored. But at pressures significantly above ambient it has to be
taken into account. The enhancement factor f has been defined as follows:

Xw * P
Pws

, where

Xw

= The mole fraction of water vapour in the gas phase

= Total pressure

(22)

Pws = The saturation water vapour pressure (from paragraph 2)

xw*P is in effect the water vapour pressure at saturation at pressure P
For CO2-free air the following equation for f has been proposed (Greenspan:J.of Research
of the NBS vol 80A, No. 1 p 41-44)

f e

P P

1
1 ws

P
P
ws

(23)

The parameters and depend on the temperature as follows:

4

Ai t i1

(24)

i1

e Bi t i1

(25)

i1

T = Temperature (C)

the parameters Ai and Bi are listed below:

VAISALA _______________________________________________________________________ 15

Humidity Conversion Formulas ________________________________________________________

water -50 to 0C
A1
A2
A3
A4
B1
B2
B3
B4

water 0 to 100C

ice -100 to 0C

3.62183X10-4

3.53624X10-4

3.64449X10-4

2.60553X10-5
3.86501X10-7
3.82449X10-9
-10.7604
6.39725X10-2
-2.63416X10-4
1.67254X10-6

2.93228X10-5
2.61474X10-7
8.57538X10-9
-10.7588
6.32529X10-2
-2.53591X10-4
6.33784X10-7

2.93631X10-5
4.88635X10-7
4.36543X10-9
-10.7271
7.61989X10-2
-1.74771X10-4
2.46721X10-6

The formulas above are fitted for the pressure range 1 ... 20 atm.
for instance at 20 C and 10 bars f=1.0312

16 __________________________________________________________________ B210973EN-C

www.vaisala.com