Scribd
Upload
33 views

I GT Distribution Equation

The document provides parameters for calculating gas flowrate through a pipeline using the IGT Distribution Equation. The parameters include inlet and outlet pressures, standard temperature and pressure, mean temperature of the pipe, diameter, length, gas properties, and elevation change. The equation is used to calculate a flowrate of approximately 2.6 billion ft^3/day for a 15.5 inch diameter pipe that is 15 miles long with an inlet pressure of 1014.7 psia and outlet pressure of 814.7 psia.

Uploaded by

prateek_bhoir
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
33 views

I GT Distribution Equation

The document provides parameters for calculating gas flowrate through a pipeline using the IGT Distribution Equation. The parameters include inlet and outlet pressures, standard temperature and pressure, mean temperature of the pipe, diameter, length, gas properties, and elevation change. The equation is used to calculate a flowrate of approximately 2.6 billion ft^3/day for a 15.5 inch diameter pipe that is 15 miles long with an inlet pressure of 1014.7 psia and outlet pressure of 814.7 psia.

Uploaded by

prateek_bhoir
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 3

The IGT Distribution Equation

For more engineering spreadsheets go to http://excelcalculations.blogspot.com Parameters Inlet pressure (absolute) Outlet pressure (absolute) Pressure, std condition (absolute) Temperature std condition (absolute) Mean temperature of line (absolute) Inside diameter Pipe length Gas relative density (air=1) Mean gas compressibility Pipeline efficiency Mean gas viscosity Elevation of exit above entrance Result Flowrate (std conditions) 1014.7 814.7 14.7 520 540 15.5 15 0.6 0.95 0.95 0.000008 0

2.6289E+08

Pressure units

Temperature Units Length units Viscosity

psia Pa

F K

in m miles

Pa s lb/ft s Unit

Inlet pressure Outlet pressure Pressure, std condition Temperature std condition Mean temperature of line Inside diameter Pipe length Viscosity Gas relative density (air=1) Mean gas compressibility Pipeline efficiency Pipe effective roughness Mean gas viscosity s Le IGT Equation

1 1 1 1 1 1 3

2 1 1

Volume flowrate

ft^3/day m^3/s Value in Imperial 1014.7 814.7 14.7 520 540 15.5 15

0.000008 0 15 262888891.2

You might also like