Scribd
Upload
72 views

Xps

This document provides information on extruded polystyrene insulation board. It describes the board's characteristics such as excellent thermal insulation, high compressive strength, resistance to water and moisture, and long durability. It also lists the board's dimensions, standard, technical data, and notes on proper use and fire safety. The board is intended for thermal insulation applications on roofs, walls, and other structures.

Uploaded by

adchem123
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
72 views

Xps

This document provides information on extruded polystyrene insulation board. It describes the board's characteristics such as excellent thermal insulation, high compressive strength, resistance to water and moisture, and long durability. It also lists the board's dimensions, standard, technical data, and notes on proper use and fire safety. The board is intended for thermal insulation applications on roofs, walls, and other structures.

Uploaded by

adchem123
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Distribute by

CERESIT
A B R A N D O F H E N K E L ( G E R M A N Y )

ADCHEM
0 5 / 2 0 1 0

XPS
Characteristic

Insulation Board

Extruded Polystyrene Insulation Board for insulation works on roof or other adoptable areas.

Excellent thermal insulation property High compressive strength High resistant to water and moisture Long durability last for years Easy to cut and saw.

Scope of Use
For any thermal insulation applications on roofs, walls, concrete structures, road foundation, basement and other adoptable areas.

refer to the relevant fire resistant code for some specific applications.

Dimension
1200 x 600mm in 20, 30, 40, 50mm thick as requested

Note
This product will ignite if exposed to open fire or any other ignition sources. Please

Standard
GB/T 10801.2-2002 (equivalent to BS3837: part 2)

Technical Data
The below is tested according to the requirement of type X250 of GB/T 10801.2-2002 Compressive intensity : 354 kPa Water absorption: Vapour permeable coefficient: Thermal conductivity at 25 C : Dimension stability (length/width/thickness) : Density Combustion performance :
o

0.53% 2.5ng/(m.s.Pa) 0.03W/(m.K) 0.19% / 0.78% / 1.20 % 36~38 kg/m3 B2 grade

Apart from the information in the leaflet, it is important to observe the relevant regulation of various organizations and trade associations and also the relevant standards for the work to be done. The warranted characteristics are based on practical experience and applied testing. However, we have no influence over site conditions and therefore, if in doubt, the user should carry out sufficient tests to ensure the product is suitable. FOR FURTHER TECHNICAL ADVICE, PLEASE CONTACT OUR AUTHORIZED DISTRIBUTOR OR COMPANY REPRESENTATIVE OFFICES

Henkel Adhesive Technologies ( Hong Kong ) Ltd.

You might also like