Scribd
Upload
80 views

2.0 Concrete Work (Plain and RCC)

The document outlines various concrete mix designs for plain and reinforced cement concrete (RCC) work. It specifies four mix designs for plain cement concrete using different ratios of cement, coarse sand, and stone aggregate, ranging from 1:2:4 to 1:5:10. It also lists two mix designs for concrete used in cills, copings, and screedings. Finally, it presents an alternate item specifying three grades of design mix concrete or ready mix concrete that can be used instead of the plain cement concrete mix designs.

Uploaded by

ravi1214
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
80 views

2.0 Concrete Work (Plain and RCC)

The document outlines various concrete mix designs for plain and reinforced cement concrete (RCC) work. It specifies four mix designs for plain cement concrete using different ratios of cement, coarse sand, and stone aggregate, ranging from 1:2:4 to 1:5:10. It also lists two mix designs for concrete used in cills, copings, and screedings. Finally, it presents an alternate item specifying three grades of design mix concrete or ready mix concrete that can be used instead of the plain cement concrete mix designs.

Uploaded by

ravi1214
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

2.

CONCRETE WORK (PLAIN AND RCC)

2.1

Plain Cement Concrete

2.1.1

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal Size)

2.1.2

1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal Size)

2.1.3

1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal Size)

2.1.4

1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal Size)

2.1.5

Same as above but for cill, coping, screeding etc.

a.

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal Size)

b.

1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal Size)

2.2

Alternate Item to 2.1.1 Item same as above 2.1.1 but for using design mix concrete or RMC nominal mix. instead of

a. b.

M5 grade concrete M10 grade concrete

c.

M15 grade concrete

You might also like