Scribd
Upload
231 views

7824C

This document provides specifications for a three-terminal positive voltage regulator integrated circuit. It can supply output currents in excess of 1 amp and does not require any external components. It has features such as internal short circuit current limiting, internal thermal overload protection, and output transistor safe-area compensation. The IC is available with an output voltage tolerance of 4% and can regulate voltages between 22.8 and 25.2 volts over an input voltage range of 27-38 volts and load currents from 5 milliamps to 1 amp.

Uploaded by

Brzata Ptica
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
231 views

7824C

This document provides specifications for a three-terminal positive voltage regulator integrated circuit. It can supply output currents in excess of 1 amp and does not require any external components. It has features such as internal short circuit current limiting, internal thermal overload protection, and output transistor safe-area compensation. The IC is available with an output voltage tolerance of 4% and can regulate voltages between 22.8 and 25.2 volts over an input voltage range of 27-38 volts and load currents from 5 milliamps to 1 amp.

Uploaded by

Brzata Ptica
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

7824

THREE-TERMINAL POSITIVE VOLTAGE REGULATOR IC

FEATURES: - OUTPUT CURRENT IN EXCESS OF 1A; - NO EXTERNAL COMPONENTS REQUIRED; - INTERNAL SHORT CIRCUIT CURRENT LIMITING; - INTERNAL THERMAL OVERLOAD PROTECTION; - OUTPUT TRANSISTOR SAFE-AREA COMPENSATION; - OUTPUT VOLTAGE OFFERED IN 4% TOLERANCE.

ABSOLUTE MAXIMUM RATINGS (Ta= 25 C) Characteristic Symbol Norm Unit TO-220 Input Voltage Vin V 40 Maximum Dissipated Ptot(max) W 15 Power(with heat sink) Maximum Dissipated Ptot(max) W 1.5 Power(without heat sink) Thermal Resistance OjC C/W 5.0 1 Junction to Case 1. Input Thermal Resistance, OjA C/W 65 2. GND Junction to Air 3. Output C 150 Junction Temperature Tj Tc=-45+70C ELECTRICAL CHARACTERISTICS (Vin=33V,Io=0.5A,Ci=0.33mkF,Co=0.1mkF,Tj=0+125C, unless otherwise noted.) Characteristic Symbo Norm Unit l Min TYP Max Output Voltage(Tj=25C) Vo 23.0 25.0 V Vo Output Voltage (5.0mAIo1.0A,Po15W) 22,8 25.2 V 27VVin38V Line Regulation(Tj=+25C) mV Vv 480 27 VVin38 V 240 30VVin36 V Load Regulation(Tj=+25C) mV Vi 480 5.0mAIo1.5A 240 0.25AIo0.75A Quiescent Current(Tj=+25C) Ib 8.0 mA 1.0 mA Quiescent Current Change 27 VVin38 V Ib 0.5 5.0mAIo1.0 A Dropout Voltage (Io=1.0A,Tj=+25C) Vi-Vo 2.0 V Short Circuit Current Limit(Ta=+25C),Vin=35V Is 0.4 A Peak Output Current(Tj=+25C) Imax 2.2 A Average Temperature Coefficient of Output TCVo 1 mV/C Voltage

You might also like