Scribd
Upload
38 views

Analysis and Design of A Four-Storied Building Using STAAD Pro

dfssd

Uploaded by

balabooks
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
38 views

Analysis and Design of A Four-Storied Building Using STAAD Pro

dfssd

Uploaded by

balabooks
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 8

Analysis and Design of a fourstoried building using STAAD Pro

Plan of building-Problem 1
(See earlier mail)

3m

2m

3m

3 Nos @ 5m C/C

Elevation of building

Details of building

Grade of concrete Grade of steel Column size Beam size Live load on floor Live load on roof Floor to floor height Density of concrete Density of masonry wall Plinth height above GL

= M 20 = Fe 415 = 300 X 450 mm = 300 X 450 mm = 3 kN/m2 = 1.5 kN/m2 = 3.1 m = 25 kN/m3 = 20 kN/m3 = 1.2 m

Floor finishes 1 kN/m2 and roof treatment 1.5 kN/m2

Assume suitable load combinations and design

parameters Apply the live, floor finish and roof treatment as floor load

Plan of building-Problem 2

3 Nos @ 5m C/C

4 Nos @3m C/C

Details of building

No. of storys = 7 Type of soil = Medium Grade of concrete Grade of steel Column size Beam size Live load on floor Live load on roof

= M 25 = Fe 415 = 300 X 500 mm = 300 X 450 mm = 3 kN/m2 = 1.5 kN/m2

Floor finishes 1 kN/m2 and roof treatment 1.5 kN/m2

Floor to floor height = 3.1 m Density of concrete = 25 kN/m3 Density of masonry wall = 20 kN/m3 Plinth height above GL = 1.2 m Consider Earthquake forces also as per IS 1893:2002

Assume suitable load combinations and design

parameters Apply the live, floor finish and roof treatment as floor load

Plan for Problem 3

Details of building

No. of storys = 4 Grade of concrete Grade of steel Column size

= M 25 = Fe 415 = 300 X 500 mm (External)


= 300 X 400 mm (Internal)

Beam size Live load on floor Live load on roof

= 300 X 450 mm = 4.5 kN/m2 = 1.5 kN/m2

Floor finishes 1 kN/m2 and roof treatment 1.5 kN/m2

Floor to floor height = 3.1 m Density of concrete = 25 kN/m3 Density of masonry wall = 20 kN/m3 Plinth height above GL = 1.2 m Consider Earthquake forces also as per IS 1893:2002

Assume suitable load combinations and design

parameters Apply the live, floor finish and roof treatment as floor load

You might also like