Chapter 16 Exercises - Civil/Electrical Autocad 2000 Instructor
Uploaded by
mpendletonChapter 16 Exercises - Civil/Electrical Autocad 2000 Instructor
Uploaded by
mpendletonAutoCAD 2000 Instructor
Chapter 16 Exercises - Civil/Electrical
CHAPTER 16 EXERCISES
Figure CE16-1 1. Concrete Tilt-Up Open the drawing entitled CE10EX2 from the Chapter 10 exercises (Fig. CE16-1). Create new Layers named Walls, Windows, and Doors. Assign a different Color to each layer. Use the Chprop command to change the existing drawing elements to the appropriate layers. SaveAs CE16EX1.
2. Column Layout Open the CE12EX1 drawing from the Chapter 12 exercises. Use the Properties command to change the Ltscale of the phantom lines around the perimeter of the building to of the Ltscale for the rest of the drawing (Fig. CE16-2). Compare this drawing with the original. SaveAs CE16EX2.
Figure CE16-2
3. Open Traverse Open the drawing CE8EX3. Create a new Layer named Traverse and set its Linetype to Phantom. Change the layer of the existing Pline to Traverse. Using Properties, turn the Ltgen for the Pline On. Note the changes in the drawing. SaveAs CE16EX3.
Figure CE16-3
Copyright 2000 The McGraw-Hill Companies. All rights reserved.
AutoCAD 2000 Instructor
4. I-Beams
Chapter 16 Exercises - Civil/Electrical
Figure CE16-4
Open the drawing named W10X15 from Chapter 10 exercises. Use the Pedit command to turn the object into one continuous Pline. Save this drawing. Repeat this process for the drawing W6X15.
