Cable Height Meter
Cable Height Meter
Glentest
Applications:
For the measurement of the height of transmission lines, distribution lines, telephone lines, cable sag, street lighting, overhead clearance and also the horizontal distance such as pole span, etc.
Specifications
MEASUREMENT RANGES 3 ~ 23m (cable diameter > 25mm) 3 ~ 15m (cable diameter > 12mm) 3 ~ 12m (cable diameter > 5.5mm) 3 ~ 10m (cable diameter > 2.5mm) -10 o C ~ 40 o C 5mm (measurement range < 10m) 10mm (measurement range > 10m) 0.5% + 2 digit 150mm YES YES (range: 3 ~ 18m) After 2 minutes Selectable YES 9V (6F22) x 1
Application Notes:
1) This cable height meter can measure the height of up to 6 wires at one time, the height of the first cable (the lowest one or the highest one) will be displayed first, then the space between each two wires can be recalled from memory one after another. 2) The ultrasonic speed is influenced by air temperature. This meter is equipped with auto temperature compensation function to make readings more accurate. Auto temperature compensation will function within -10 C~40 C range of environmental temperature, so operating the meter out of this environmental temperature range shall be avoided.
o o
OPERATING TEMPERATURE RESOLUTION ACCURACY MINIMUM DISTANCE BETWEEN CABLES MEASUREMENT OF 6 CABLES AT A TIME HORIZONTAL DISTANCE MODE AUTO POWER OFF IMPERIAL/METRIC SYSTEM TEMPERATURE DISPLAY AND AUTO COMPENSATION BATTERY TYPE
Measurement Principle:
This cable height meter sends a short burst of ultrasonic when measurement begins and the sensor of the meter will then pick up the ultrasonic bounced from the object under measurement and then calculate the distance between the meter and object under measurement based on the time it takes.
SHANGHAI GLENTEST ELECTRONICS CO., LTD.
TEST INSTRUMENTS SPECIALIST
Glentest
International Sales:
Tel: +86 21 65921024 Fax: +86 21 65921514 Address: 401/3, No. 365 Guanglingsi Road, Shanghai 200082, China