Scribd
Upload
255 views

Opcom Clear SDM Deployment Data

The document provides steps to clear an airbag deployment record from some airbag control modules without replacing the module. It involves connecting a diagnostic interface to the module, selecting clear deployment record, and then disconnecting and reconnecting the battery to reset the interior lights.

Uploaded by

Oprea Vasile
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
255 views

Opcom Clear SDM Deployment Data

The document provides steps to clear an airbag deployment record from some airbag control modules without replacing the module. It involves connecting a diagnostic interface to the module, selecting clear deployment record, and then disconnecting and reconnecting the battery to reset the interior lights.

Uploaded by

Oprea Vasile
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TO_ http://www.digital-kaos.co.

uk yary1

Opcom, Clearing Airbag Deployment Record. Some SDM Airbag modules allow clearance of the deployment record without replacing the SDM module. Astra-H / Zafira-B

Choose SDM Airbag Read faultcodes Choose Programming Choose Clear deployment record Select parameters from dropdownlist Choose Start activation Close communication with SDM Airbag module and disconnect the interface from car

Lock the car using the remote Wait at least 15 seconds Unlock the car using the remote Reconnect to the SDM Airbag module Clear faultcodes from SDM Airbag module The interior light will stay on now Disconnect negative terminal from battery Wait at least one minute Reconnect the negative terminal to battery Interior light will work fine now

You might also like