Scribd
Upload
192 views

ME2405 Mechatronics Lab

This lesson plan outlines experiments to be conducted in a Mechatronics lab course. Over two cycles, students will gain practical experience with hydraulic and pneumatic kits, PLC control, LabVIEW interfaces, and controlling servo motors, stepper motors, and process variables. The plan details 12 core experiments involving the control of cylinders, flow rates, actuators, temperature, and pressure using PLCs, microcontrollers, and PID controllers programmed in LabVIEW. An additional two optional experiments are included for open-loop temperature monitoring and hydraulic actuator control using a PLC.

Uploaded by

Hiru Purushothaman Hirudayanathan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
192 views

ME2405 Mechatronics Lab

This lesson plan outlines experiments to be conducted in a Mechatronics lab course. Over two cycles, students will gain practical experience with hydraulic and pneumatic kits, PLC control, LabVIEW interfaces, and controlling servo motors, stepper motors, and process variables. The plan details 12 core experiments involving the control of cylinders, flow rates, actuators, temperature, and pressure using PLCs, microcontrollers, and PID controllers programmed in LabVIEW. An additional two optional experiments are included for open-loop temperature monitoring and hydraulic actuator control using a PLC.

Uploaded by

Hiru Purushothaman Hirudayanathan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DOC/LP/01/28.02.

02

LESSON PLAN
ME 2405 MECHATRONICS LAB Branch: MECHANICAL Semester : VII

LP- ME 2405 LP Rev. No:02 Date: 28.06.11 Page 1 of 2

Objective: To acquire practical knowledge on working principles of hydraulic kit, pneumatic kit with PLC control, use of Lab View interface, control of process variables, control of Servo Motor & Stepper Motor. Session Duration : 150 Minutes CYCLE-I Session 1 2 3 4 5 6 7 Experiment No III Batch IV Batch V Batch Introduction Class 3 4 5 4 5 6 5 6 1 6 1 2 1 2 3 2 3 4

I Batch 1 2 3 4 5 6

II Batch 2 3 4 5 6 1

VI Batch 6 1 2 3 4 5

CYCLE-II Session 7 8 9 10 11 12 13 14 15 I Batch 7 8 9 10 11 12 Experiment No II Batch III Batch IV Batch V Batch Introduction Class 8 9 10 11 9 10 11 12 10 11 12 7 11 12 7 8 12 7 8 9 7 8 9 10 Conduct of Extra Experiments MODEL EXAMINATION VI Batch 12 7 8 9 10 11

LESSON PLAN
ME 2405 MECHATRONICS LAB Branch: MECHANICAL Semester : VII

LP- ME 2405 LP Rev. No:02 Date:28/06/11 Page 2 of 2


DOC/LP/01/28.02.02

LIST OF EXPERIMENTS CYCLE-I Experiment No 1 2 3 4 5 6 Name of the Experiment Control of Single & Double acting cylinders using Basic Pneumatic Trainer Kit Control of Single & Double Acting cylinders using Electro pneumatic Trainer Kit Control of Double Acting cylinders using PLC Control of Fow rate using PID controller-LabVIEW software Control of Hydraulic Linear Actuator- FORCE/SPEED/ DIRECTION using PID controller-LabVIEW software Simulation of Hydrosim software CYCLE-II Experiment No 7 Name of the Experiment i) Implementation of Logical Operator using PLC & Application of PLC, TIMER, COUNTER for water level controller ii) Control of servo motor using open/closed loop servo controller Control of Temperature & D.C Motor using PID controller-LabVIEW software Control of Stepper Motor using 8051 Microcontroller Simulation on pneumosim software Control of static pressure using PID controller-LabVIEW software Simulation on LabVIEW software Extra Experiments Experiment No 1 2 Name of the Experiment Design and development of Open loop LabVIEW software for monitoring temperature variation of liquid. Control of hydraulic liner actuator using PLC Prepared by Signature Name Designation Date M.MOHANDASS Assistant Professor 28/06/2011 Dr. N. Nallusamy HOD/Mechanical 28/06/2011 Approved by

8 9 10 11 12

You might also like