Scribd
Upload
166 views

CS 1302

computer networks

Uploaded by

Robin
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF or read online on Scribd
166 views

CS 1302

computer networks

Uploaded by

Robin
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 7
B.E/B.Tech. DEGREE EXAMINATION, MAY/JUNE 2007. Sixth Semester (Regulation 2004) Electronics and Communication Engineering CS 1302 — COMPUTER NETWORKS (Common to BE (Part-time) Fifth semester Regulation 2005) ‘Time : Three hours Maximum : 100 marks 10. Answer ALL questions. PART A— (10 x 2 = 20 marks) ‘What is multicast? What is the difference between unicast and multicast? What is the necessity of flow control? What is FDDI? Write the difference between a bridge and a raster. Where is a routing table maintained? Also state the purpose of maintaining a routing table. Find the error if any in the following IP addres: (a) 111.56.045.78 (b) 75.45.301.14. What is the frame format used in UDP? ‘What is a datagram socket? List the two types of DNS messages. State why Telnet uses Network Virtual terminal. 12. 13. (a) (b) (a) (b) (a) @ Gi) Gi) @ Gi) wa Gi) PART B — (5 x 16 = 80 marks) Compare Connection oriented and connectionless service. @ Discuss the major functions performed by the Presentation layer and Application layer of the ISO OSI model. 6 What are the major components of an optical communication system? Discuss. © Or Perform a comparative study between the ISO OSI model and the TOP/IP reference model. a2) Distinguish between point to point links and multi point links. Give relevant diagrams. @) A block of 82 bits has to be transmitted. Discuss how the thirty two bit block is transmitted to the receiver using Longitudinal Redundancy Check. 6) Consider a 32 bit block of data 11100111 11011101 00111001 10101001 that has to be transmitted. If Longitudinal Redundancy Check is used what is the transmitted bit stream? (4) (ii) In the Hamming code, for a data unit of ‘m’ bits how do you compute the number of redundant bits ‘r’ needed? (3) (iv) What kinds of errors can Vertical Redundancy check determine? What kinds of errors it cannot determine? @) Or (i) Discuss stop and wait protocol (3) (i) Discuss sliding window protocol using Go back n. 6) (iii) How does a Token Ring LAN operate? Discuss. ©) ” Find the class of each IP address. Give suitable explanation. (16) (@) 227.12.14.87 Gi) 193.14.56.22 2 C3151 14, 16. (b) (a) (b) (a) (ii) 14.23.120.8 Gv) 252.5.15.111 (vy) 134.11.78.56 (vi) 00000000 11110000 11111111 00110011 (vii) 10000000 11110000 11111111 00110011 (viii) 11000000 11110000 11111111 00110011 Or (@ State the major difference between Distance Vector Routing and Link State Routing. Discuss how these routing techniques work. (az) (ii) What is the subnetwork address if the destination address is 200.45.34.56 and the subnet mask is 255.255.240.0? (4) @ List and discuss the states used in the TCP connection management finite state machine. © (ii) Discuss the various timers used by TCP to perform its various operations. (10) Or @ Present a tutorial on User Datagram Protocol (UDP). (12) (ii) Discuss the strategies TCP uses to avoid congestion. (4) (What is HTTP protocol used for? What is the default port number of HTTP protocol. Discuss the features of HTTP and also discuss how HTTP works. (20) “ Gi) List and discuss the types of DNS records. (6) Or 3 C3151

You might also like