Scribd
Upload
150 views

Drilling - Formulas

The document provides formulas for calculating drilling parameters such as RPM, cutting speed, feed speed, material removal rate, power requirement, torque, feed force, and machining time. It defines terms used in the formulas such as diameter, depth of hole, feed per revolution, distance from drill point to workpiece, cutting speed, specific cutting force, machine efficiency, and cross-sectional area of the hole. The formulas allow calculation of critical values needed for efficient and effective drilling operations.

Uploaded by

Laxmi Kant Prasad
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
150 views

Drilling - Formulas

The document provides formulas for calculating drilling parameters such as RPM, cutting speed, feed speed, material removal rate, power requirement, torque, feed force, and machining time. It defines terms used in the formulas such as diameter, depth of hole, feed per revolution, distance from drill point to workpiece, cutting speed, specific cutting force, machine efficiency, and cross-sectional area of the hole. The formulas allow calculation of critical values needed for efficient and effective drilling operations.

Uploaded by

Laxmi Kant Prasad
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Drilling Formulas

Nomenclature and formulas


RPM n = vc 12 D (rev/min) f = Feed per revolution h = Distance from drill point to workpiece before feeding Cutting speed vc = nD 12 (ft/min) kc = Specific cutting force L = Depth of hole = Machine efficiency Feed speed vf = f n (inch/min) (inch/rev) (inch) (Lbf/inch2) (inch) (%)

Cross section area of the hole AT = R2 (in2)

Material removal rate Q= vf AT (inch3/min)

Power requirement Pc = D/4 f vc kc 33, 000 (Hp)

Torque Mc = Hp 5252 n (ft/lbs)

Feed force (approx.) Ff = .7 D/2 f kc (lbs)

Machining time Tc = L+h vf (Min/piece)

You might also like