SIMATIC

Pomina\ 01/03/2013 09:44:15 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

FC363 - <offline>
VR43 drive logic Family: Version: 0.1 Block version: 2 03/09/2012 11:13:24 AM Time stamp Code: 12/10/2001 10:28:47 AM Interface: Lengths (block/logic/data): 07172 06804 00042 "VR43 DriveLogic" Name: Author: Grandis

Name IN OUT IN_OUT TEMP ScratchX1 ScratchB1 ScratchI1 ScratchW1 ScratchDW1 ScratchR1 Scratch_Real Scratch_Real_2 Scratch_Bool RETURN RET_VAL

Data Type

Address 0.0 0.0 0.0 0.0

Comment

Bool Byte Int Word DWord Real Real Real Bool

0.0 1.0 2.0 4.0 6.0 10.0 14.0 18.0 22.0 0.0 0.0

Block: FC363

VR43 - drive management

Network: 1

null network

Network: 2 notes:

Data preset

> rolls diameter: 160mm motor poles number: 6 reduction ratio: 1 1000rpm @50hz -> 8.38m/s 1800rpm @90hz -> 15.08m/s L T L T L T L T L T L 900 "VR43LogicData".Drive.LimMaxFrequenceRef 0 "VR43LogicData".Drive.LimMinSpeedRef 200 "VR43LogicData".Drive.SpeedRefRampMinLim 6000 "VR43LogicData".Drive.SpeedRefRampMaxLim -150 "VR43LogicData".Drive.LimMinTorqueRef 150 DB363.DBW92 DB363.DBW58 DB363.DBW78 DB363.DBW80 DB363.DBW86 -- Speed reference maximum limit, [Hz/10] -- Speed reference minimum limit, [cm/s] -- Min limit on selected ramp s/100 -- Max limit on selected ramp s/100 -- Torque reference minimum limit [%]

Page 1 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:15 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

"VR43LogicData".Drive.LimMaxTorqueRef Drive inserted in rolling program DB363.DBW88 -- Torque reference maximum limit [%]

T Network: 3

DB1.DBX4.3 The cooling DB531.DBX4 bed line 6.1 is Step selected insert in as rolling production program line (from "PLC1toOth database) erPLC". CoolingBed "VR43Devic eData". LineSelect InCascade ed DB1.DBX4.3 The cooling bed line is selected as production line "PLC1toOth erPLC". CoolingBed LineSelect ed

DB363.DBX2 4.0 Inserted as devices "VR43Logic Data". Drive. Inserted

Network: 4

Drive inserted in cascade

DB1.DBX4.3 The cooling DB531.DBX4 bed line 6.1 is Step selected insert in as rolling production program line (from "PLC1toOth database) erPLC". CoolingBed "VR43Devic LineSelect eData". ed InCascade DB367.DBX7 .3 "FG43Logic Data". Alarms. al_60

DB363.DBX2 4.1 Inserted in rolling program "VR43Logic Data". Drive. InCascade

Page 2 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:15 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 5 L DTR L *R RND T L L <I JC NEGI M001: NOP L >I = Network: 6

Minimum speed "VR43DeviceData".Motor_nominal_speed DB531.DBW4 -- Motor nomina l speed, [RPM], (from database)

2.000000e-002 #ScratchW1 0 "VR43DeviceData".SpeedFeedback_RPM M001 0 #ScratchW1 #ScratchX1 Minimum speed drop delayed // 2% of motor nominal speed #ScratchW1 #ScratchX1 // 2% of motor nominal speed #ScratchW1 DB531.DBW118 ck, [rpm] -- Speed feedba

FC101 StandardBMB: timer off delay SF "SF_Timer" EN ENO M100.2 ALWAYS ON "M 100.2" #ScratchX1 #ScratchX1 IN_Start IN_Base_ 1 Time IN_Time_ 10 Setting DB363.DBW1 14 Timer accumulato r memo "VR43Logic Data". Drive. Timer1. AccMemo DB363.DBX2 4.5 Minimum speed "VR43Logic Data". Drive. OUT_Timer MinSpeed

IN_OUT_ Memo_ Accumulat or

DB363.DBW1 16 Timer actual value "VR43Logic Data". Drive. Timer1. IN_OUT_ ActualValu Accumulat e or_Timer

Page 3 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:15 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 7

Controls on to drive

DB300.DBX1 2.1 Cooling bed area machine controls ON pulse "GeneralDa ta". MachineCon trolsONPul se Q8.3 VR43 L03 282 controls on "Q 8.3"

I1.3 L03 222 1PF cooling bed area machines controls off SEL "I 1.3"

DB316.DBX0 DB363.DBX0 .0 .1 1ED local DB363.DBX2 //1,VR43, pulpit, drive 4.0 enabled control Inserted controls on loss as devices "1EDlocalD "VR43Logic "VR43Logic esk". Data". Data". enabledCon Drive. Alarms. trols Inserted al_02 DB363.DBX2 5.6 Line contactor is inserted "VR43Logic Data". Drive. LineInsert ionOk

Q8.3 VR43 L03 282 controls on "Q 8.3"

Network: 8

Controls on check delay

FC100 stdbmb-funzioniVari eUltimeRelease "SD_Timer" ENO EN Q8.3 VR43 L03 282 controls on "Q 8.3" IN_Start IN_Base_ 1 Time IN_Time_ 30 Setting DB363.DBW1 20 Timer accumulato r memo "VR43Logic Data". Drive. Timer2. AccMemo DB363.DBX2 4.6 Controls ON correct insertion check "VR43Logic Data". Drive. ControlOnC OUT_Timer heck

M100.2 ALWAYS ON "M 100.2"

IN_OUT_ Memo_ Accumulat or

DB363.DBW1 22 Timer actual value "VR43Logic Data". Drive. Timer2. IN_OUT_ ActualValu Accumulat e or_Timer

Page 4 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:15 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 9

Controls on to drive are correctly inserted

DB363.DBX2 4.6 Controls ON correct insertion check "VR43Logic Data". Drive. ControlOnC heck

I14.5 VR43 L03 D02 280 controls on "I 14.5"

DB363.DBX2 4.7 Control on correctly inserted "VR43Logic Data". Drive. ControlOnO k

Network: 10

Line insertion disable

FC102 StandardBMB: timer ritentive on pulse SE "SE_Timer" ENO EN DB363.DBX2 5.1 Line insertion disable DB363.DBX2 auxiliar 4.7 1 (after Control control on on) correctly inserted "VR43Logic "VR43Logic Data". Data". Drive. Drive. Aux1_ ControlOnO LineInserD k isable P DB363.DBX2 5.2 Line insertion disable auxiliar 2 (after line off) "VR43Logic Data". Drive. Aux2_ LineInserD isable N DB363.DBX2 5.0 Line insertion disabling "VR43Logic Data". Drive. LineInsert OUT_Timer ionDisable M100.3 ALWAYS OFF "M 100.3" IN_Start M100.3 ALWAYS OFF "M 100.3" IN_Reset IN_Base_ 2 Time IN_Time_ 60 Setting DB363.DBW1 26 Timer accumulato r memo "VR43Logic Data". Drive. Timer3. AccMemo

Q8.1 VR43 L03 D02 282 line insertion "Q 8.1"

IN_OUT_ Memo_ Accumulat or

DB363.DBW1 28 Timer actual value "VR43Logic Data". Drive. Timer3. IN_OUT_ ActualValu Accumulat e or_Timer DB363.DBW1 30 Timer out memo "VR43Logic Data". Drive. Timer3. IN_OUT_ OutMemo Word_Memo

Page 5 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:15 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 11

Line contactor insertion

DB363.DBX2 4.0 Inserted as devices "VR43Logic Data". Drive. Inserted DB363.DBX3 2.4 Drive enable auxiliary "VR43Logic Data". Drive. DriveEnabl e

DB363.DBX3 0.7 Emergency DB363.DBX2 DB363.DBX0 delayed 4.7 .2 (goes off DB363.DBX2 DB363.DBX2 Control //1,VR43, 6.7 5.0 after on drive Drive Line certain correctly line heavy insertion delay inserted contactor alarms disabling time) loss "VR43Logic "VR43Logic "VR43Logic "VR43Logic Data". Data". Data". Data". "VR43Logic Drive. Drive. Drive. Drive. Data". ControlOnO EmergencyD DriveHeavy LineInsert Alarms. k elayed Alarms ionDisable al_03

Q8.1 VR43 L03 D02 282 line insertion "Q 8.1"

Q8.1 VR43 L03 D02 282 line insertion "Q 8.1"

Network: 12

Line insertion check

FC100 stdbmb-funzioniVari eUltimeRelease "SD_Timer" EN ENO Q8.1 VR43 L03 D02 282 line insertion "Q 8.1" IN_Start IN_Base_ 1 Time IN_Time_ 20 Setting DB363.DBW1 32 Timer accumulato r memo "VR43Logic Data". Drive. Timer4. AccMemo DB363.DBX2 5.5 Line correct insertion check "VR43Logic Data". Drive. LineInsert OUT_Timer ionCheck

M100.2 ALWAYS ON "M 100.2"

IN_OUT_ Memo_ Accumulat or

DB363.DBW1 34 Timer actual value "VR43Logic Data". Drive. Timer4. IN_OUT_ ActualValu Accumulat e or_Timer

Page 6 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:16 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 13

Line contactor is correctly inserted

DB363.DBX2 5.5 Line correct insertion check "VR43Logic Data". Drive. LineInsert ionCheck

I14.6 VR43 L03 D02 280 line "I 14.6"

DB363.DBX2 5.6 Line contactor is inserted "VR43Logic Data". Drive. LineInsert ionOk

Network: 14

Reset command

DB51.DBX91 .6 VR43,Reset push button,Pb "ENG_AUX". VR43_ ResCmd DB50.DBX0. 0 GEN,alarms reset,pb "HMI". DBX0_00 DB363.DBX2 DB363.DBX2 4.7 6.0 Control aux reset on on correctly controls inserted ON "VR43Logic "VR43Logic Data". Data". Drive. Drive. ControlOnO AuxResetOn k controlsON P

DB363.DBX2 4.4 Cumulative Reset command "VR43Logic Data". Drive. ResetCmd

M100.3 ALWAYS OFF "M 100.3"

Page 7 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:16 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 15

Reset pulse

FC102 StandardBMB: timer ritentive on pulse SE "SE_Timer" ENO EN DB363.DBX2 4.4 Cumulative Reset command "VR43Logic Data". Drive. ResetCmd IN_Start M100.3 ALWAYS OFF "M 100.3" IN_Reset IN_Base_ 1 Time IN_Time_ 10 Setting DB363.DBW1 44 Timer accumulato r memo "VR43Logic Data". Drive. Timer6. AccMemo DB363.DBX2 5.7 Reset pulse "VR43Logic Data". Drive. OUT_Timer ResetPulse

M100.2 ALWAYS ON "M 100.2"

IN_OUT_ Memo_ Accumulat or

DB363.DBW1 46 Timer actual value "VR43Logic Data". Drive. Timer6. IN_OUT_ ActualValu Accumulat e or_Timer DB363.DBW1 48 Timer out memo "VR43Logic Data". Drive. Timer6. IN_OUT_ OutMemo Word_Memo

Page 8 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:16 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 16

Reset to drive

DB363.DBX2 DB363.DBX2 5.7 4.5 Reset Minimum pulse speed "VR43Logic "VR43Logic Data". Data". Drive. Drive. ResetPulse MinSpeed

Q8.0 VR43 L03 D02 282 reset "Q 8.0"

Network: 17

Cobble detection

DB363.DBX3 0.3 Upstream stand DB316.DBX0 DB363.DBX2 rolling DB363.DBX3 DB363.DBX2 .1 4.1 on (bar DB363.DBX2 1.0 6.6 1ED local Inserted presence 4.5 Automatic Cobble pulpit, in upstream) Minimum run. detected remote rolling speed "VR43Logic "VR43Logic "VR43Logic enabled program "VR43Logic "1EDlocalD "VR43Logic Data". Data". Data". M100.3 Data". esk". Data". Drive. Drive. Drive. ALWAYS OFF UpsStandRo Drive. Drive. AutomaticR remoteEnab CobbleDete MinSpeed led InCascade "M 100.3" llingOn un cted DB363.DBX2 DB363.DBX2 6.6 4.4 Cobble Cumulative detected Reset "VR43Logic command "VR43Logic Data". Data". Drive. Drive. CobbleDete ResetCmd cted

Page 9 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:16 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 18

Oil lubrication pressure filtered

FC100 stdbmb-funzioniVari eUltimeRelease "SD_Timer" EN ENO M100.2 ALWAYS ON "M 100.2" M100.2 ALWAYS ON "M 100.2" IN_Start IN_Base_ 1 Time IN_Time_ 20 Setting DB363.DBW2 88 Timer accumulato r memo "VR43Logic Data". Drive. Timer30. AccMemo DB363.DBX3 8.0 min oil lubricatio n flow filtered "VR43Logic Data". Drive. minOilFlow OUT_Timer Filtered

IN_OUT_ Memo_ Accumulat or

DB363.DBW2 90 Timer actual value "VR43Logic Data". Drive. Timer30. IN_OUT_ ActualValu Accumulat e or_Timer

Page 10 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:16 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 19

DRIVE READY BYPASS ON LINE INSERTION

M99.2 (2012-03-07, A.POLI) On line contactor insertion a pulse bypass the ready condition from the drive preventing drive heavy alarms. FC103 StandardBMB: timer on pulse SP "SP_Timer" EN ENO M99.2 Temporary By-pass Revamping 2011 "M 99.2" Q8.1 VR43 L03 D02 282 line insertion "Q 8.1" IN_Start IN_Base_ 1 Time IN_Time_ 100 Setting DB363.DBW2 94 Timer accumulato r memo "VR43Logic Data". Drive. Timer31. AccMemo #ScratchX1 OUT_Timer #ScratchX1

IN_OUT_ Memo_ Accumulat or

DB363.DBW2 96 Timer actual value "VR43Logic Data". Drive. Timer31. IN_OUT_ ActualValu Accumulat e or_Timer

Page 11 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:16 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 20

Drive heavy alarms

I15.1 VR43 L03 D02 280 inverter ready "I 15.1" #ScratchX1 #ScratchX1 DB363.DBX2 5.6 Line contactor is inserted "VR43Logic Data". Drive. LineInsert ionOk

DB363.DBX0 .3 //1,VR43, drive out of control (stop not done) "VR43Logic Data". Alarms. al_04

DB363.DBX2 6.7 Drive heavy alarms "VR43Logic Data". Drive. DriveHeavy Alarms

Network: 21

Drive light alarms 180s

M100.2 ALWAYS ON "M 100.2"

DB363.DBX2 7.0 Drive light alarms 180 s "VR43Logic Data". Drive. DriveLight Al180

Page 12 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:16 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 22

Drive light alarms 180s delayed

FC101 StandardBMB: timer off delay SF "SF_Timer" EN ENO DB363.DBX2 7.0 Drive light alarms 180 s "VR43Logic Data". Drive. DriveLight Al180 IN_Start IN_Base_ 2 Time IN_Time_ 180 Setting DB363.DBW1 68 Timer accumulato r memo "VR43Logic Data". Drive. Timer10. AccMemo DB363.DBX2 7.1 Drive light alarms 180 s delayed "VR43Logic Data". Drive. DriveLight Al180delay OUT_Timer ed

M100.2 ALWAYS ON "M 100.2"

IN_OUT_ Memo_ Accumulat or

DB363.DBW1 70 Timer actual value "VR43Logic Data". Drive. Timer10. IN_OUT_ ActualValu Accumulat e or_Timer

Network: 23

Drive light alarms 120s

M100.2 ALWAYS ON "M 100.2"

DB363.DBX2 7.2 Drive light alarms 120 s "VR43Logic Data". Drive. DriveLight Al120

Page 13 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:16 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 24

Drive light alarms 120s delayed

FC101 StandardBMB: timer off delay SF "SF_Timer" EN ENO DB363.DBX2 7.2 Drive light alarms 120 s "VR43Logic Data". Drive. DriveLight Al120 IN_Start IN_Base_ 2 Time IN_Time_ 120 Setting DB363.DBW1 74 Timer accumulato r memo "VR43Logic Data". Drive. Timer11. AccMemo DB363.DBX2 7.3 Drive light alarms 120 s delayed "VR43Logic Data". Drive. DriveLight Al120delay OUT_Timer ed

M100.2 ALWAYS ON "M 100.2"

IN_OUT_ Memo_ Accumulat or

DB363.DBW1 76 Timer actual value "VR43Logic Data". Drive. Timer11. IN_OUT_ ActualValu Accumulat e or_Timer

Network: 25

Plant heavy alarms

DB363.DBX2 6.6 Cobble detected "VR43Logic Data". Drive. CobbleDete cted

DB363.DBX2 8.2 Plant heavy alarms "VR43Logic Data". Drive. PlantHeavy Alarms

Page 14 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:16 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 26

Plant light alarms 180s

M100.2 ALWAYS ON "M 100.2"

DB363.DBX2 8.3 Plant light alarms 180 s "VR43Logic Data". Drive. PlantLight Al180

Network: 27

Plant light alarms 180s delayed

FC101 StandardBMB: timer off delay SF "SF_Timer" ENO EN DB363.DBX2 8.3 Plant light alarms 180 s "VR43Logic Data". Drive. PlantLight Al180 IN_Start IN_Base_ 2 Time IN_Time_ 180 Setting DB363.DBW1 98 Timer accumulato r memo "VR43Logic Data". Drive. Timer15. AccMemo DB363.DBX2 8.4 Plant light alarms 180 s delayed "VR43Logic Data". Drive. PlantLight Al180delay OUT_Timer ed

M100.2 ALWAYS ON "M 100.2"

IN_OUT_ Memo_ Accumulat or

DB363.DBW2 00 Timer actual value "VR43Logic Data". Drive. Timer15. IN_OUT_ ActualValu Accumulat e or_Timer

Page 15 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:16 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 28

Plant light alarms 120s

DB363.DBX5 DB363.DBX5 .1 .0 //3,VR43, //2,VR43, lubricatio lubricatio n unit n flow not missing running "VR43Logic "VR43Logic Data". Data". Alarms. Alarms. al_41 al_42

DB363.DBX2 8.5 Plant light alarms 120 s "VR43Logic Data". Drive. PlantLight Al120

Network: 29

Plant light alarms 120s delayed

FC101 StandardBMB: timer off delay SF "SF_Timer" ENO EN DB363.DBX2 8.5 Plant light alarms 120 s "VR43Logic Data". Drive. PlantLight Al120 IN_Start IN_Base_ 2 Time IN_Time_ 120 Setting DB363.DBW2 04 Timer accumulato r memo "VR43Logic Data". Drive. Timer16. AccMemo DB363.DBX2 8.6 Plant light alarms 120 s delayed "VR43Logic Data". Drive. PlantLight Al120delay OUT_Timer ed

M100.2 ALWAYS ON "M 100.2"

IN_OUT_ Memo_ Accumulat or

DB363.DBW2 06 Timer actual value "VR43Logic Data". Drive. Timer16. IN_OUT_ ActualValu Accumulat e or_Timer

Page 16 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:16 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 30

Cumulative heavy alarms

DB363.DBX2 DB363.DBX2 6.7 8.2 Drive Plant heavy heavy alarms alarms "VR43Logic "VR43Logic Data". Data". Drive. Drive. DriveHeavy PlantHeavy Alarms Alarms

DB363.DBX2 9.5 Cumulative heavy alarms "VR43Logic Data". Drive. Cumulative HeavyAlarm s

Network: 31

Cumulative light alarms

DB363.DBX2 DB363.DBX2 DB363.DBX2 DB363.DBX2 DB363.DBX2 7.2 7.0 8.5 8.3 9.6 Drive Drive Plant Plant Cumulative light light light light light alarms alarms alarms alarms alarms "VR43Logic 120 s 180 s 120 s 180 s "VR43Logic "VR43Logic "VR43Logic "VR43Logic Data". Data". Data". Data". Data". Drive. Drive. Drive. Drive. Drive. Cumulative DriveLight DriveLight PlantLight PlantLight LightAlarm Al120 Al180 Al120 Al180 s

Network: 32

Cumulative light alarms delayed

DB363.DBX2 DB363.DBX2 DB363.DBX2 DB363.DBX2 DB363.DBX2 7.3 7.1 8.6 8.4 9.7 Drive Drive Plant Plant Cumulative light light light light light alarms alarms alarms alarms alarms 120 s 180 s 120 s 180 s delayed delayed delayed delayed delayed "VR43Logic "VR43Logic "VR43Logic "VR43Logic "VR43Logic Data". Data". Data". Data". Data". Drive. Drive. Drive. Drive. Drive. DriveLight DriveLight PlantLight PlantLight Cumulative Al120delay Al180delay Al120delay Al180delay LightAlDel ed ed ed ed ayed

Page 17 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:16 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 33

Cumulative light alarms delayed to scrapping in advance

FC101 StandardBMB: timer off delay SF "SF_Timer" EN ENO DB363.DBX2 9.7 Cumulative light alarms delayed "VR43Logic Data". Drive. Cumulative LightAlDel ayed IN_Start IN_Base_ 2 Time IN_Time_ 10 Setting DB363.DBW2 28 Timer accumulato r memo "VR43Logic Data". Drive. Timer20. AccMemo DB363.DBX3 0.0 Cumulative light alarms delayed to permit a scrapping in advance "VR43Logic Data". Drive. CumulLight OUT_Timer ScrapAllow

M100.2 ALWAYS ON "M 100.2"

IN_OUT_ Memo_ Accumulat or

DB363.DBW2 30 Timer actual value "VR43Logic Data". Drive. Timer20. IN_OUT_ ActualValu Accumulat e or_Timer

Page 18 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:16 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 34

Load in filter

FC101 StandardBMB: timer off delay SF "SF_Timer" EN ENO M100.2 ALWAYS ON "M 100.2" M100.3 ALWAYS OFF "M 100.3" IN_Start IN_Base_ 1 Time IN_Time_ 15 Setting DB363.DBW2 34 Timer accumulato r memo "VR43Logic Data". Drive. Timer21. AccMemo DB363.DBX3 0.1 Load in signal filtered (off delay timer) "VR43Logic Data". Drive. LoadInFilt OUT_Timer ered

IN_OUT_ Memo_ Accumulat or

DB363.DBW2 36 Timer actual value "VR43Logic Data". Drive. Timer21. IN_OUT_ ActualValu Accumulat e or_Timer

Network: 35

Rolling On

DB363.DBX3 0.1 Load in signal DB363.DBX2 filtered 4.1 DB363.DBX3 (off Inserted DB363.DBX2 DB363.DBX3 1.0 delay in 4.5 0.2 Automatic timer) rolling Minimum stand run. program "VR43Logic "VR43Logic rolling on speed "VR43Logic "VR43Logic "VR43Logic Data". Data". Data". Data". Data". Drive. Drive. Drive. Drive. Drive. LoadInFilt AutomaticR InCascade MinSpeed RollingOn ered un DB363.DBX3 0.2 stand rolling on "VR43Logic Data". Drive. RollingOn

Page 19 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:16 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 36

Upstream rolling On

DB349.DBX3 0.3 Upstream stand rolling on (bar presence upstream) "C41LogicD ata". Drive. UpsStandRo llingOn DB363.DBX3 0.2 stand rolling on "VR43Logic Data". Drive. RollingOn

DB363.DBX3 0.3 Upstream stand rolling on (bar presence upstream) "VR43Logic Data". Drive. UpsStandRo llingOn

Network: 37

Automatic run consent

DB363.DBX2 9.6 Cumulative light alarms "VR43Logic Data". Drive. Cumulative LightAlarm s DB363.DBX3 0.0 Cumulative DB363.DBX3 0.3 light Upstream alarms stand delayed rolling to permit DB363.DBX3 on (bar a 1.0 presence scrapping Automatic in advance upstream) run. "VR43Logic "VR43Logic "VR43Logic Data". Data". Data". Drive. Drive. Drive. CumulLight UpsStandRo AutomaticR ScrapAllow llingOn un

DB363.DBX2 DB363.DBX2 DB316.DBX0 DB363.DBX3 9.5 5.6 .1 0.4 Cumulative Line 1ED local Automatic heavy contactor pulpit, run alarms is "VR43Logic remote consent. inserted Data". enabled "VR43Logic "VR43Logic Drive. "1EDlocalD Data". Data". Cumulative esk". Drive. Drive. HeavyAlarm LineInsert remoteEnab AutomaticR s led ionOk unConsent

Page 20 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:16 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 38

Remote start command

DB316.DBX0 .1 DB1.DBX7.4 1ED local VR43 pulpit, start remote from enabled keyboard "1EDlocalD "PLC1toOth esk". erPLC". remoteEnab VR43Start led DB51.DBX91 .4 VR43,Start push button,Pb "ENG_AUX". VR43_ StartCmd

DB363.DBX2 4.2 Cumulative Start command "VR43Logic Data". Drive. StartCmd

Network: 39

Remote stop command

DB316.DBX0 .1 1ED local DB1.DBX7.5 pulpit, VR43 stop remote from enabled keyboard "1EDlocalD "PLC1toOth esk". erPLC". remoteEnab VR43Stop led DB51.DBX91 .5 VR43,Stop push button,Pb "ENG_AUX". VR43_ StopCmd

DB363.DBX2 4.3 Cumulative Stop command "VR43Logic Data". Drive. StopCmd

Network: 40

Fast stop

I1.5 L03 222 1PH cooling bed area fast stop MPB "I 1.5"

M100.2 ALWAYS ON "M 100.2"

DB363.DBX3 0.5 Fast stop function. (0=stop with fast ramp) "VR43Logic Data". Drive. FastStop

Page 21 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:16 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 41

Emergency ok

I0.7 L03 1PF 221 cooling bed area emergency (=0) "I 0.7"

DB363.DBX3 0.6 1=consent. Stop with very fast ramp. "VR43Logic Data". Drive. Emergency

Network: 42

Emergency delayed

FC101 StandardBMB: timer off delay SF "SF_Timer" EN ENO DB363.DBX3 0.6 1=consent. Stop with very fast ramp. "VR43Logic Data". Drive. Emergency IN_Start IN_Base_ 1 Time IN_Time_ 50 Setting DB363.DBW2 40 Timer accumulato r memo "VR43Logic Data". Drive. Timer22. AccMemo DB363.DBX3 0.7 Emergency delayed (goes off after certain delay time) "VR43Logic Data". Drive. EmergencyD OUT_Timer elayed

M100.2 ALWAYS ON "M 100.2"

IN_OUT_ Memo_ Accumulat or

DB363.DBW2 42 Timer actual value "VR43Logic Data". Drive. Timer22. IN_OUT_ ActualValu Accumulat e or_Timer

Page 22 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:16 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 43

Automatic run

DB363.DBX3 DB363.DBX3 DB363.DBX3 0.5 DB363.DBX2 DB363.DBX2 Fast stop DB363.DBX3 0.6 0.4 4.2 4.3 1.0 function. 1=consent. Automatic DB363.DBX2 4.0 Cumulative Cumulative Automatic Stop run (0=stop Inserted Start Stop run. with very consent. with fast command command fast ramp. "VR43Logic as devices "VR43Logic ramp) "VR43Logic "VR43Logic "VR43Logic "VR43Logic "VR43Logic Data". Data". Data". Data". Data". Data". Data". Drive. Drive. Drive. Drive. Drive. Drive. Drive. AutomaticR AutomaticR StartCmd StopCmd FastStop Emergency Inserted unConsent un DB363.DBX3 1.0 Automatic run. "VR43Logic Data". Drive. AutomaticR un

Network: 44

Automatic forward

DB363.DBX3 1.0 Automatic run. "VR43Logic Data". Drive. AutomaticR un

DB363.DBX3 1.1 Automatic forward "VR43Logic Data". Drive. AutomaticF orward

Network: 45

Automatic reverse

M100.3 ALWAYS OFF "M 100.3"

DB363.DBX3 1.2 Automatic reverse "VR43Logic Data". Drive. AutomaticR everse

Page 23 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:16 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 46

Jog consent

DB363.DBX2 DB363.DBX2 DB363.DBX2 9.5 9.6 5.6 Cumulative Cumulative Line heavy light contactor alarms alarms is "VR43Logic "VR43Logic inserted "VR43Logic Data". Data". Data". Drive. Drive. Drive. Cumulative Cumulative HeavyAlarm LightAlarm LineInsert ionOk s s

DB363.DBX3 1.3 Jog consent "VR43Logic Data". M100.3 Drive. ALWAYS OFF "M 100.3" JogConsent

Network: 47

Forward jog command

DB363.DBX3 0.6 DB363.DBX3 1=consent. 1.3 Stop Jog with very consent fast ramp. "VR43Logic "VR43Logic Data". Data". Drive. Drive. JogConsent Emergency

DB363.DBX3 DB363.DBX3 1.5 1.4 Reverese Forward jog jog command command "VR43Logic "VR43Logic M100.3 Data". Data". ALWAYS OFF Drive. Drive. "M 100.3" ReverseJog ForwardJog

Network: 48

Reverse jog command

DB363.DBX3 0.6 DB363.DBX3 1=consent. 1.3 Stop Jog with very consent fast ramp. "VR43Logic "VR43Logic Data". Data". Drive. Drive. JogConsent Emergency

DB363.DBX3 DB363.DBX3 1.4 1.5 Forward Reverese jog jog command command "VR43Logic "VR43Logic M100.3 Data". Data". ALWAYS OFF Drive. Drive. "M 100.3" ForwardJog ReverseJog

Page 24 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:16 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 49

Forward run request

DB363.DBX3 DB363.DBX3 2.0 1.1 Reverse Automatic run forward request "VR43Logic "VR43Logic Data". Data". Drive. Drive. AutomaticF ReverseRun orward Request DB363.DBX3 1.4 Forward jog command "VR43Logic Data". Drive. ForwardJog

DB363.DBX3 1.7 Forward run request "VR43Logic Data". Drive. ForwardRun Request

Network: 50

Reverse run request

DB363.DBX3 DB363.DBX3 1.7 1.2 Forward Automatic run reverse request "VR43Logic "VR43Logic Data". Data". Drive. Drive. AutomaticR ForwardRun everse Request DB363.DBX3 1.5 Reverese jog command "VR43Logic Data". Drive. ReverseJog

DB363.DBX3 2.0 Reverse run request "VR43Logic Data". Drive. ReverseRun Request

Page 25 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:16 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 51

Drive enable command drop delay

FC101 StandardBMB: timer off delay SF "SF_Timer" EN ENO DB363.DBX3 1.7 Forward run request "VR43Logic Data". Drive. ForwardRun Request DB363.DBX3 2.0 Reverse run request "VR43Logic Data". Drive. ReverseRun Request DB363.DBX2 4.5 Minimum speed "VR43Logic Data". Drive. MinSpeed DB363.DBX2 DB363.DBX2 5.6 6.7 Line Drive contactor heavy is alarms inserted "VR43Logic "VR43Logic Data". Data". Drive. Drive. LineInsert DriveHeavy ionOk Alarms IN_Start IN_Base_ 0 Time IN_Time_ 100 Setting DB363.DBW2 46 Timer accumulato r memo "VR43Logic Data". Drive. Timer23. AccMemo DB363.DBX3 2.4 Drive enable auxiliary "VR43Logic Data". Drive. DriveEnabl OUT_Timer e

Q8.2 VR43 L03 D02 282 start "Q 8.2"

IN_OUT_ Memo_ Accumulat or

DB363.DBW2 48 Timer actual value "VR43Logic Data". Drive. Timer23. IN_OUT_ ActualValu Accumulat e or_Timer

Network: 52

Drive enable command

DB363.DBX2 DB363.DBX3 DB363.DBX2 5.6 2.4 6.7 Line Drive Drive contactor enable heavy is auxiliary alarms inserted "VR43Logic "VR43Logic "VR43Logic Data". Data". Data". Drive. Drive. Drive. DriveEnabl LineInsert DriveHeavy e ionOk Alarms

Q8.2 VR43 L03 D02 282 start "Q 8.2"

Page 26 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:16 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 53

Selected speed reference

M100.2 ALWAYS ON "M 100.2" EN 0 IN

MOVE ENO DB363.DBW6 2 Selected speed reference, [cm/s] "VR43Logic Data". Drive. SelectedSp OUT eedRef

Network: 54

Speed reference in jog

M100.2 ALWAYS ON "M 100.2"

DB363.DBX3 1.4 Forward jog command "VR43Logic Data". Drive. ForwardJog EN DB363.DBX3 1.5 Reverese jog command "VR43Logic Data". Drive. ReverseJog 100 IN

MOVE ENO DB363.DBW6 2 Selected speed reference, [cm/s] "VR43Logic Data". Drive. SelectedSp OUT eedRef

Network: 55 A JCN L L +I L *I L /D T M006: NOP

Speed reference in automatic run "VR43LogicData".Drive.AutomaticRun M006 "HMI".DBW198 100 "GeneralData".CalibrFinStandSpeedRef 100 "VR43LogicData".Drive.SelectedSpeedRef 0 DB363.DBW62 -- Selected speed reference, [cm/s] DB363.DBX31.0 DB50.DBW198 DB300.DBW32 -- Automatic run. -- VR43,speed correction,imp,##,%,0,60,ric -- Calibrated finishing stand speed reference [cm/s]

Page 27 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:17 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 56 CALL

Speed reference limits "FC260" :="VR43DeviceData".Max_linear_speed :="VR43LogicData".Drive.LimMinSpeedRef FC260 se DB531.DBW168 DB363.DBW58 [cm/s] DB363.DBW62 ] -- stdbmb-funzioniVarieUltimeRelea -- Max linear speed [cm/s] xx.xx -- Speed reference minimum limit, -- Selected speed reference, [cm/s

IN_UpperLimit IN_LowerLimit

INOUT_WordToBeLimited:="VR43LogicData".Drive.SelectedSpeedRef

Network: 57

Ramp time selection for fast stop

DB363.DBX3 0.5 Fast stop function. (0=stop with fast ramp) "VR43Logic Data". Drive. FastStop DB363.DBX3 0.6 1=consent. Stop with very fast ramp. "VR43Logic Data". Drive. Emergency DB363.DBX3 2.5 DB363.DBX2 Ramp time selection 4.5 for fast Minimum stop speed "VR43Logic "VR43Logic Data". Data". Drive. Drive. MinSpeed FastRamp

DB363.DBX3 2.5 Ramp time selection for fast stop "VR43Logic Data". Drive. FastRamp

Network: 58

Ramp time selection for normal stop

DB363.DBX3 DB363.DBX3 DB363.DBX3 2.7 3.0 2.5 Ramp time DB363.DBX3 Ramp time Ramp time selection 1.0 selection selection for Automatic for jog for fast normal run run. run stop "VR43Logic "VR43Logic "VR43Logic "VR43Logic Data". Data". Data". Data". Drive. Drive. Drive. Drive. AutomaticR LightRampS JogRamp FastRamp un lopeDown

Page 28 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:17 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 59

Ramp time selection for normal run

DB363.DBX3 DB363.DBX3 2.6 DB363.DBX3 2.7 Ramp time DB363.DBX3 2.5 Ramp time selection 1.0 Ramp time selection for Automatic selection for normal run. for fast normal run stop "VR43Logic "VR43Logic "VR43Logic stop Data". Data". Data". "VR43Logic Drive. Drive. Drive. Data". AutomaticR LightRampS LightRampS Drive. un lopeDown lopeUp FastRamp

Network: 60

Ramp time selection for jog run

DB363.DBX3 1.3 Jog consent "VR43Logic Data". Drive. JogConsent

DB363.DBX3 3.0 Ramp time selection for jog run "VR43Logic Data". Drive. JogRamp

Page 29 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:17 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 61

Ramp time selection for ramp function

M100.2 ALWAYS ON "M 100.2"

DB363.DBX3 3.0 Ramp time selection for jog run "VR43Logic Data". Drive. JogRamp EN 500 IN

MOVE ENO DB363.DBW7 4 Ramp Time, s/100 "VR43Logic Data". Drive. SpeedRefRa OUT mp_Time

DB363.DBX3 2.6 Ramp time selection for normal stop "VR43Logic Data". Drive. LightRampS lopeUp EN 1500 IN

MOVE ENO DB363.DBW7 4 Ramp Time, s/100 "VR43Logic Data". Drive. SpeedRefRa OUT mp_Time

DB363.DBX3 2.7 Ramp time selection for normal run "VR43Logic Data". Drive. LightRampS lopeDown EN 1500 IN

MOVE ENO DB363.DBW7 4 Ramp Time, s/100 "VR43Logic Data". Drive. SpeedRefRa OUT mp_Time

DB363.DBX3 2.5 Ramp time selection for fast stop "VR43Logic Data". Drive. FastRamp EN 500 IN

MOVE ENO DB363.DBW7 4 Ramp Time, s/100 "VR43Logic Data". Drive. SpeedRefRa OUT mp_Time

Page 30 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:17 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 62 CALL

Ramp time limits "FC260" :="VR43LogicData".Drive.SpeedRefRampMaxLim :="VR43LogicData".Drive.SpeedRefRampMinLim FC260 ease DB363.DBW80 100 DB363.DBW78 100 DB363.DBW74 -- stdbmb-funzioniVarieUltimeRel -- Max limit on selected ramp s/ -- Min limit on selected ramp s/ -- Ramp Time, s/100

IN_UpperLimit IN_LowerLimit

INOUT_WordToBeLimited:="VR43LogicData".Drive.SpeedRefRamp_Time

Network: 63 CALL

Ramp function "LinRampW" FC106 ters DB363.DBW62 DB531.DBW168 DB363.DBW74 DB300.DBD54 DB363.DBD66 DB363.DBW64 -- Linear ramp function -Word Data Parame -- Selected speed reference, [cm/s] -----Max linear speed [cm/s] xx.xx Ramp Time, s/100 CPU scan time Ramping Function accumulator Ramped speed reference, [cm/s]

IN_Set :="VR43LogicData".Drive.SelectedSpeedRef IN_MinSet :=W#16#0 IN_MaxSet :="VR43DeviceData".Max_linear_speed IN_RampTime :="VR43LogicData".Drive.SpeedRefRamp_Time IN_ScanTime :="GeneralData".ScanTime IN_OUT_Accu :="VR43LogicData".Drive.SpeedRefRamp_Accu OUT_RampedSet:="VR43LogicData".Drive.RampedSpeedRef

Network: 64

Selected torque reference

M100.2 ALWAYS ON "M 100.2" EN 150 IN

MOVE ENO DB363.DBW9 0 Selected torque reference [%] "VR43Logic Data". Drive. SelectedTo OUT rqueRef

Network: 65

Torque reference in automatic run

DB363.DBX3 1.0 Automatic run. "VR43Logic Data". Drive. AutomaticR un EN DB363.DBW8 8 Torque reference maximum limit [%] "VR43Logic Data". Drive. LimMaxTorq ueRef IN

MOVE ENO DB363.DBW9 0 Selected torque reference [%] "VR43Logic Data". Drive. SelectedTo OUT rqueRef

Page 31 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:17 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 66 CALL

Torque reference limits "FC260" :="VR43LogicData".Drive.LimMaxTorqueRef :="VR43LogicData".Drive.LimMinTorqueRef FC260 ase DB363.DBW88 [%] DB363.DBW86 [%] DB363.DBW90 -- stdbmb-funzioniVarieUltimeRele -- Torque reference maximum limit -- Torque reference minimum limit -- Selected torque reference [%]

IN_UpperLimit IN_LowerLimit

INOUT_WordToBeLimited:="VR43LogicData".Drive.SelectedTorqueRef

Network: 67

Aux Enable to read/write PPO (profibus communication with drive)

FC101 StandardBMB: timer off delay SF "SF_Timer" EN ENO DB363.DBX2 5.6 Line contactor DB363.DBX2 is 5.7 inserted Reset "VR43Logic pulse "VR43Logic Data". Data". Drive. Drive. LineInsert ResetPulse ionOk IN_Start IN_Base_ 1 Time IN_Time_ 10 Setting DB363.DBW2 92 Timer out memo "VR43Logic Data". Drive. Timer30. OutMemo DB363.DBX3 5.3 Enable profibus communicat ion filtered "VR43Logic Data". Drive. EnablingPP OUT_Timer O_Aux

M100.2 ALWAYS ON "M 100.2"

IN_OUT_ Memo_ Accumulat or

DB363.DBW2 88 Timer accumulato r memo "VR43Logic Data". Drive. IN_OUT_ Timer30. Accumulat AccMemo or_Timer

Page 32 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:17 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 68

Disable profibus communication

FC101 StandardBMB: timer off delay SF "SF_Timer" EN ENO Q8.0 VR43 L03 D02 282 reset "Q 8.0" IN_Start IN_Base_ 1 Time IN_Time_ 20 Setting DB363.DBW2 62 Timer out memo "VR43Logic Data". Drive. Timer25. OutMemo DB363.DBX3 3.4 Disable profibus communicat ion while drive is reset "VR43Logic Data". Drive. DisablePro fCommAtRes OUT_Timer et

M100.2 ALWAYS ON "M 100.2"

IN_OUT_ Memo_ Accumulat or

DB363.DBW2 58 Timer accumulato r memo "VR43Logic Data". Drive. IN_OUT_ Timer25. Accumulat AccMemo or_Timer

Page 33 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:17 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 69

PPO read, from drive

DB363.DBX3 5.2 Profibus slave DB363.DBX3 station 3.4 not DB363.DBX3 Disable present DB363.DBX2 5.3 profibus (1= 4.7 Enable communicat alarm, Control profibus DB363.DBX3 ion while from on communicat 3.5 drive is diagnostic correctly ion Enable to reset data inserted filtered "VR43Logic read/write block) "VR43Logic "VR43Logic "VR43Logic Data". PPO Data". Data". Data". Drive. "VR43Logic Drive. Drive. Drive. DisablePro Data". ControlOnO EnablingPP fCommAtRes PfbSlaveNo Drive. k O_Aux tPresent et EnablePPO DB363.DBX3 0.4 Automatic run consent. "VR43Logic Data". Drive. AutomaticR unConsent DB363.DBX3 1.3 Jog consent "VR43Logic Data". Drive. JogConsent DB363.DBX2 6.7 Drive heavy alarms "VR43Logic Data". Drive. DriveHeavy Alarms Q8.2 VR43 L03 D02 282 start "Q 8.2" DB363.DBX3 5.1 Enable profibus communicat ion check (to be used in diagnostic function) "VR43Logic Data". Drive. EnableProf ibusCommCh eck

Network: 70 AN ON JCN L T T T T T M002: NOP A JCN "PLC1toOtherPLC".CoolingBedLineSelected "VR43LogicData".Drive.EnablePPO M002 0 "VR43DeviceData".SpeedFeedback_drive "VR43DeviceData".CurrentFeedback_drive "VR43DeviceData".VoltageFeedback_drive "VR43DeviceData".TorqueFeedback_drive "VR43DeviceData".PPO_read.PZD7 0 "VR43LogicData".Drive.EnablePPO M003 DB1.DBX4.3 ine DB363.DBX33.5 DB531.DBW116 DB531.DBW124 DB531.DBW134 DB531.DBW140 DB531.DBW190 -- The cooling bed line is selected as production l -- Enable to read/write PPO ----Speed feedback from drive, [drive format] Current feedback from drive, [drive format] Voltage feedback from drive, [drive format] Torque feedback from drive, [drive format]

DB363.DBX33.5 FC12

-- Enable to read/write PPO -- PPO read and transfer to DB area

CALL "PPOreadDB" IN_MotorInputAddress:=W#16#474 IN_PPOCode :=5 IN_PPOreadDBTarget :=531 IN_PPOreadDBWTarget :=170 L T L T L T "VR43DeviceData".PPO_read.PZD1 "VR43DeviceData".SpeedFeedback_drive "VR43DeviceData".PPO_read.PZD3 "VR43DeviceData".CurrentFeedback_drive "VR43DeviceData".PPO_read.PZD4 "VR43DeviceData".VoltageFeedback_drive

DB531.DBW178 DB531.DBW116 DB531.DBW182 DB531.DBW124 DB531.DBW184 DB531.DBW134

-- Speed feedback from drive, [drive format] -- Current feedback from drive, [drive format] -- Voltage feedback from drive, [drive format]

Page 34 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:17 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

"VR43DeviceData".PPO_read.PZD5 "VR43DeviceData".TorqueFeedback_drive 0 Command word "Q 8.2" "VR43DeviceData".Command_word.commandBit7 "VR43LogicData".Drive.ForwardRunRequest "VR43DeviceData".Command_word.commandBit0 "VR43LogicData".Drive.ReverseRunRequest "VR43DeviceData".Command_word.commandBit1 "VR43DeviceData".Command_word.commandBit2 "VR43DeviceData".Command_word.commandBit3 "VR43DeviceData".Command_word.commandBit4 "VR43DeviceData".Command_word.commandBit5 "VR43DeviceData".Command_word.commandBit6 "VR43DeviceData".Command_word.commandBit8 "VR43DeviceData".Command_word.commandBit9 "VR43DeviceData".Command_word.commandBit10 "VR43DeviceData".Command_word.commandBit11 "VR43DeviceData".Command_word.commandBit12 "VR43DeviceData".Command_word.commandBit13 "VR43DeviceData".Command_word.commandBit14 "VR43DeviceData".Command_word.commandBit15 DB531.DBW 150 "VR43DeviceData".PPO_write.PZD1 Speed ref. to drive "VR43LogicData".Drive.RampedSpeedRef "VR43LogicData".Drive.SelectedSpeedRef "VR43DeviceData".AMS_to_PLC.SpeedReference "VR43LogicData".Drive.RampedSpeedRef "VR43LogicData".Drive.LimMaxFrequenceRef "VR43DeviceData".Max_linear_speed "VR43DeviceData".PPO_write.PZD2 0 M004 1 "VR43DeviceData".PPO_write.PZD2 0 torque upper and lower limits to drive 150 "VR43DeviceData".PPO_write.PZD3 -150 "VR43DeviceData".PPO_write.PZD4 data to AMS DB363.DBW64 DB363.DBW62 DB531.DBW72 DB363.DBW64 DB363.DBW92 DB531.DBW168 DB531.DBW208 -- Ramped speed reference, [cm/s] -- Selected speed reference, [cm/s] -- AMS->PLC speed reference, [cm/s] -- Ramped speed reference, [cm/s] -- Speed reference maximum limit, [Hz/10] -- Max linear speed [cm/s] xx.xx Q8.2 DB531.DBX151.7 DB363.DBX31.7 DB531.DBX151.0 DB363.DBX32.0 DB531.DBX151.1 DB531.DBX151.2 DB531.DBX151.3 DB531.DBX151.4 DB531.DBX151.5 DB531.DBX151.6 DB531.DBX150.0 DB531.DBX150.1 DB531.DBX150.2 DB531.DBX150.3 DB531.DBX150.4 DB531.DBX150.5 DB531.DBX150.6 DB531.DBX150.7 DB531.DBW206 ------------------VR43 L03 D02 282 start command word Bit 7 Forward run request SPDM command word, start command (1=start) Reverse run request command word Bit 1 command command command command command command command command command command command command word word word word word word word word word word word word Bit Bit Bit Bit Bit Bit Bit Bit Bit Bit Bit Bit 2 3 4 5 6 8 9 10 11 12 13 14 DB531.DBW186 DB531.DBW140

L T M003: NOP Network: 71 A = A = A = CLR = = = = = = = = = = = = SET = L T Network: 72 L L T L L *I L /D T L <>I JC L T M004: NOP Network: 73 L T L T Network: 74

-- Torque feedback from drive, [drive format]

-- command word Bit 15

DB531.DBW208

DB531.DBW210 DB531.DBW212

PPO's not used data are set to 0 L // // // // T T T T T T T T T T 0 "VR43DeviceData".PPO_write.PKE "VR43DeviceData".PPO_write.IND "VR43DeviceData".PPO_write.PWEmsw "VR43DeviceData".PPO_write.PWElsw "VR43DeviceData".PPO_write.PZD5 "VR43DeviceData".PPO_write.PZD6 "VR43DeviceData".PPO_write.PZD7 "VR43DeviceData".PPO_write.PZD8 "VR43DeviceData".PPO_write.PZD9 "VR43DeviceData".PPO_write.PZD10

DB531.DBW214 DB531.DBW216 DB531.DBW218 DB531.DBW220 DB531.DBW222 DB531.DBW224

Page 35 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:17 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

"VR43LogicData".Drive.EnablePPO M005 "PPOwriteDB" DB363.DBX33.5 /write PPO FC13 DB area // this should be "local control desk".localEnabled -- Enable to read

A JCN CALL

-- PPO write from

IN_MotorInputAddress:=W#16#474 IN_PPOCode :=5 IN_PPOWriteDBSource :=531 IN_PPOWriteDBWSource:=198 M005: NOP 0 Network: 75

Supervision data: speed reference

//------------------------------- rpm -----------------------------L "VR43DeviceData".AMS_to_PLC.SpeedReference ITD DTR T L ITD DTR *R L /R AN AN JC L T RND T

DB531.DBW72 -- AMS->PLC speed reference, [cm/s] #Scratch_Real DB531.DBW16 -- Drive spe ed , [RPM], (from database)

#Scratch_Real "VR43DeviceData".Drive_speed

// Speed ref cm/s, Real

"VR43DeviceData".MaxLinearSpeed_real OV UO rrR 0.000000e+000 "ENG_AUX".VR43_SpdRefPV_Rpm "VR43DeviceData".SpeedRefToDrive_RPM //if division by 0 //if division by 0

DB531.DBD226 r speed cm/s Real

-- Max linea

rrR:

DB51.DBD92 -- VR43,Spee d reference,Dspl,RPM DB531.DBW146 -- Speed ref erence to drive, [rpm] #Scratch_Real DB51.DBD100 -- VR43,Spee d reference,Dspl,m/s DB531.DBW72 -- AMS->PLC speed reference, [cm/s] DB531.DBW148 -- Speed ref erence to drive, [cm/s] #Scratch_Real DB531.DBD226 r speed cm/s Real -- Max linea

//--------------------------------Linear---------------------------L #Scratch_Real // Speed ref cm/s, Real L 1.000000e+002 /R T "ENG_AUX".VR43_SpdRefPV_Mps L T "VR43DeviceData".AMS_to_PLC.SpeedReference "VR43DeviceData".SpeedRefToDrive_Linear

//------------------------------ % -----------------------------------L #Scratch_Real // Speed ref cm/s, Real L 1.000000e+002 // % *R L "VR43DeviceData".MaxLinearSpeed_real /R AN AN JC L T OV UO rrP 0.000000e+000 "ENG_AUX".VR43_SpdRefPV_Prc //if division by 0 //if division by 0

rrP:

DB51.DBD96 -- VR43,Spee d reference,Dspl,%

Network: 76

Supervision data: speed feedback

//------------------------------- rpm -----------------------------L "VR43DeviceData".SpeedFeedback_drive ITD DTR T T L

DB531.DBW116 -- Speed feedba ck from drive, [drive format] #Scratch_Real DB51.DBD104 eedback,Dspl,RPM

#Scratch_Real "ENG_AUX".VR43_SpdPV_Rpm "VR43DeviceData".SpeedFeedback_drive

// Speed fbk Drive format, Real

-- VR43,Speed f

DB531.DBW116 -- Speed feedba ck from drive, [drive format]

Page 36 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:17 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

"VR43DeviceData".SpeedFeedback_RPM DB531.DBW118 ck, [rpm] #Scratch_Real DB531.DBD226 peed cm/s Real -- Speed feedba

//--------------------------------Linear---------------------------L #Scratch_Real // Speed fbk Drive format, Real L "VR43DeviceData".MaxLinearSpeed_real *R L ITD DTR /R AN AN JC L T L /R T "VR43DeviceData".Drive_speed

-- Max linear s

DB531.DBW16 -- Drive speed , [RPM], (from database)

srQ:

OV UO srQ 0.000000e+000 #Scratch_Real_2 1.000000e+002 "ENG_AUX".VR43_SpdPV_Mps

//if division by 0 //if division by 0 #Scratch_Real_2 DB51.DBD112 eedback,Dspl,m/s #Scratch_Real_2 DB531.DBW120 ck, [cm/s] #Scratch_Real DB531.DBW16 -- Drive speed , [RPM], (from database) -- Speed feedba -- VR43,Speed f

L RND T

#Scratch_Real_2 "VR43DeviceData".SpeedFeedback_Linear

//------------------------------ % -----------------------------------L #Scratch_Real // Speed fbk Drive format, Real L 1.000000e+002 // % *R L "VR43DeviceData".Drive_speed ITD DTR /R AN AN JC L T RND T

srP:

OV UO srP 0.000000e+000 "ENG_AUX".VR43_SpdPV_Prc "VR43DeviceData".SpeedFeedback_Perc

//if division by 0 //if division by 0 DB51.DBD108 eedback,Dspl,% DB531.DBW122 ck, [%] -- VR43,Speed f -- Speed feedba

Network: 77

Supervision data: Current feedback

//------------------------------- A -----------------------------L "VR43DeviceData".CurrentFeedback_drive ITD DTR T L /R AN AN JC L T RND T

DB531.DBW124 -- Current fee dback from drive, [drive format] #Scratch_Real

#Scratch_Real 1.000000e+001 OV UO irR 0.000000e+000 "ENG_AUX".VR43_CurPV_A "VR43DeviceData".CurrentFeedback_A

// Current Drive format, Real //if division by 0 //if division by 0

irR:

DB51.DBD116 t feedback,Dspl,A DB531.DBW126 dback, [A] DB51.DBD116 t feedback,Dspl,A

-- VR43,Curren -- Current fee

//------------------------------ % -----------------------------------L "ENG_AUX".VR43_CurPV_A // Current feedback, A, Real L *R L DTR /R AN AN 1.000000e+003 "VR43DeviceData".Motor_nominal_current // % * 10

-- VR43,Curren

DB531.DBD6 -- Motor nomin al current, [A*10], (from databas e) //if division by 0 //if division by 0

OV UO

Page 37 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:17 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

irP 0.000000e+000 "ENG_AUX".VR43_CurPV_Prc "VR43DeviceData".CurrentFeedback_Perc

irP:

JC L T RND T

DB51.DBD120 t feedback,Dspl,% DB531.DBW132 dback, [%]

-- VR43,Curren -- Current fee

Network: 78

Supervision data: Torque feedback

//------------------------------- rpm -----------------------------L "VR43DeviceData".TorqueFeedback_drive // Torque fbk Drive format % ITD DTR T L // L ITD DTR *R L /R AN AN JC L T RND T

DB531.DBW140 -- Torque feedb ack from drive, [drive format] #Scratch_Real DB531.DBW32 -- Drive max to rque, [N*m], (from database)

#Scratch_Real "VR43DeviceData".Drive_torque "VR43DeviceData".Motor_torque

// Torque fbk Drive format %, Real // it should be referred to drive to rque

1.000000e+002 OV UO trR 0.000000e+000 "ENG_AUX".VR43_TrqPV_Nm "VR43DeviceData".TorqueFeedback_Nm //if division by 0 //if division by 0 DB51.DBD124 feedback,Dspl,N*m DB531.DBW144 ack, [N*m] -- VR43,Torque -- Torque feedb

trR:

//------------------------------ % -----------------------------------L #Scratch_Real // Torque fbk Drive format %, Real L "VR43DeviceData".Motor_torque // it should be referred to drive to rque ITD DTR *R L "VR43DeviceData".Drive_torque ITD DTR /R AN AN JC L T RND T

#Scratch_Real DB531.DBW30 -- Motor nomina l torque, [N*m], (from database)

DB531.DBW32 -- Drive max to rque, [N*m], (from database)

trP:

OV UO trP 0.000000e+000 "ENG_AUX".VR43_TrqPV_Prc "VR43DeviceData".TorqueFeedback_Perc

//if division by 0 //if division by 0 DB51.DBD128 feedback,Dspl,% DB531.DBW142 ack, [%] -- VR43,Torque -- Torque feedb

Page 38 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:17 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 79 0 1 2 3 4 = = = = =

Supervision data: status byte

gray = not inserted red = alarm/emergency yellow = jog green = ready to run blue = automatic run

DB363.DBX2 4.0 Inserted as devices "VR43Logic Data". Drive. Inserted EN 0 IN

MOVE ENO DB51.DBB13 2 VR43,Statu s code: 0=not ins;1=alar m/emerg;2= jog;3=read y;4=aut run,Dspl "ENG_AUX". VR43_ OUT StaCode

#Scratch_B ool #Scratch_ Bool

DB363.DBX3 0.4 DB363.DBX2 DB363.DBX3 Automatic run 4.0 1.3 consent. Inserted Jog "VR43Logic as devices consent Data". "VR43Logic "VR43Logic Drive. Data". Data". AutomaticR Drive. Drive. Inserted JogConsent unConsent EN 1 IN

MOVE ENO DB51.DBB13 2 VR43,Statu s code: 0=not ins;1=alar m/emerg;2= jog;3=read y;4=aut run,Dspl "ENG_AUX". VR43_ OUT StaCode

DB363.DBX2 DB363.DBX3 4.0 1.3 Inserted Jog as devices consent "VR43Logic "VR43Logic Data". Data". Drive. Drive. Inserted JogConsent EN 2 IN

MOVE ENO DB51.DBB13 2 VR43,Statu s code: 0=not ins;1=alar m/emerg;2= jog;3=read y;4=aut run,Dspl "ENG_AUX". VR43_

Page 39 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:17 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

VR43_ OUT StaCode

DB363.DBX3 DB363.DBX3 0.4 1.0 DB363.DBX2 Automatic Automatic run 4.0 run. consent. Inserted as devices "VR43Logic "VR43Logic "VR43Logic Data". Data". Data". Drive. Drive. Drive. AutomaticR AutomaticR Inserted unConsent un EN 3 IN

MOVE ENO DB51.DBB13 2 VR43,Statu s code: 0=not ins;1=alar m/emerg;2= jog;3=read y;4=aut run,Dspl "ENG_AUX". VR43_ OUT StaCode

DB363.DBX3 DB363.DBX2 1.0 4.0 Automatic Inserted run. as devices "VR43Logic "VR43Logic Data". Data". Drive. Drive. AutomaticR Inserted un EN 4 IN

MOVE ENO DB51.DBB13 2 VR43,Statu s code: 0=not ins;1=alar m/emerg;2= jog;3=read y;4=aut run,Dspl "ENG_AUX". VR43_ OUT StaCode

Network: 80

Scrap request

DB363.DBX2 9.6 DB363.DBX3 Cumulative 1.0 light Automatic alarms "VR43Logic run. Data". "VR43Logic Drive. Data". Cumulative Drive. AutomaticR LightAlarm s un DB363.DBX2 4.1 Inserted in rolling program "VR43Logic Data". Drive. InCascade

DB363.DBX3 4.0 1= Furnace consent "VR43Logic Data". Drive. FurnaceCon sent DB51.DBX13 3.0 VR43,Ready to roll (furnace consent),D spl "ENG_AUX". VR43_ RollOkSta

Page 40 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:17 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 81

Alarm: drive controls on not inserted

DB363.DBX2 9.7 Cumulative DB363.DBX2 4.1 light Inserted alarms in delayed "VR43Logic rolling Data". program Drive. "VR43Logic Cumulative Data". LightAlDel Drive. ayed InCascade DB363.DBX3 1.0 Automatic run. "VR43Logic Data". Drive. AutomaticR un

DB363.DBX3 3.7 1= Scrap request "VR43Logic Data". Drive. ScrapReque st DB51.DBX13 3.1 VR43,Scrap ping request,Ds pl "ENG_AUX". VR43_ ScpReqSta

Network: 82

Alarm: controls on loss

DB363.DBX2 4.7 Control on DB363.DBX2 correctly 4.0 inserted Inserted as devices "VR43Logic "VR43Logic Data". Data". Drive. Drive. ControlOnO Inserted k

DB363.DBX0 .0 //3,VR43, drive controls ON not inserted "VR43Logic Data". Alarms. al_01

Network: 83

Alarm: line contactor loss

DB363.DBX2 4.6 DB316.DBX0 DB316.DBX0 Controls .3 .2 ON 1ED local 1ED local correct pulpit, pulpit, insertion local/remo local check te pulse enabled "VR43Logic "1EDlocalD "1EDlocalD Data". esk". esk". Drive. local_ ControlOnC localEnabl remotePuls ed heck e DB316.DBX0 .1 1ED local pulpit, remote enabled "1EDlocalD esk". remoteEnab led

I14.5 VR43 L03 D02 280 controls on "I 14.5"

DB363.DBX0 .1 //1,VR43, drive control on loss "VR43Logic Data". Alarms. al_02

Page 41 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:17 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 84

Alarm: drive out of control (stop not done)

Time setted must be longer than the longest ramp time DB363.DBX2 5.5 Line correct insertion check "VR43Logic Data". Drive. LineInsert ionCheck DB363.DBX0 .2 //1,VR43, drive line contactor loss "VR43Logic Data". Alarms. al_03

I14.6 VR43 L03 D02 280 line "I 14.6"

DB363.DBX0 .2 //1,VR43, DB363.DBX2 4.4 drive Cumulative line Reset contactor command loss "VR43Logic "VR43Logic Data". Data". Alarms. Drive. al_03 ResetCmd

Network: 85

Alarm: speed reference missing

FC100 stdbmb-funzioniVari eUltimeRelease "SD_Timer" ENO EN DB363.DBX3 DB363.DBX3 1.7 2.0 Forward Reverse run run request request "VR43Logic "VR43Logic Data". Data". Drive. Drive. ForwardRun ReverseRun Request Request IN_Start DB363.DBX0 .3 //1,VR43, drive out DB363.DBX2 of 4.4 control Cumulative (stop not Reset done) command "VR43Logic "VR43Logic Data". Data". Alarms. Drive. al_04 ResetCmd IN_Base_ 2 Time IN_Time_ 60 Setting DB363.DBW2 64 Timer accumulato r memo "VR43Logic Data". Drive. Timer26. AccMemo DB363.DBX0 .3 //1,VR43, drive out of control (stop not done) "VR43Logic Data". Alarms. OUT_Timer al_04

Q8.2 VR43 L03 D02 282 start "Q 8.2"

IN_OUT_ Memo_ Accumulat or

DB363.DBW2 66 Timer actual value "VR43Logic Data". Drive. Timer26. IN_OUT_ ActualValu Accumulat e or_Timer

Page 42 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:17 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 86

Alarm: could be stopped in maximum 3 minutes

FC100 stdbmb-funzioniVari eUltimeRelease "SD_Timer" EN ENO DB531.DBX1 51.0 SPDM command word, start DB363.DBX2 command 4.5 (1=start) Minimum "VR43Devic speed eData". "VR43Logic Command_ Data". word. Drive. commandBit MinSpeed 0 IN_Start IN_Base_ 2 Time IN_Time_ 5 Setting DB363.DBW2 70 Timer accumulato r memo "VR43Logic Data". Drive. Timer27. AccMemo DB363.DBX0 .4 //1,VR43, speed reference missing "VR43Logic Data". Alarms. OUT_Timer al_05

IN_OUT_ Memo_ Accumulat or

DB363.DBW2 72 Timer actual value "VR43Logic Data". Drive. Timer27. IN_OUT_ ActualValu Accumulat e or_Timer

Network: 87

Alarm: cobble detected

DB363.DBX2 9.6 DB363.DBX3 Cumulative light 1.0 alarms Automatic "VR43Logic run. Data". "VR43Logic Drive. Data". Cumulative Drive. AutomaticR LightAlarm s un

DB363.DBX0 .6 //2,VR43, could be stopped in maximum 3 minutes "VR43Logic Data". Alarms. al_07

Page 43 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:17 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 88

Alarm: cobble initiated due to continuity control

DB363.DBX2 4.7 DB363.DBX2 Control 6.6 on Cobble correctly detected inserted "VR43Logic "VR43Logic Data". Data". Drive. Drive. ControlOnO CobbleDete k cted

DB363.DBX0 .7 //1,VR43, cobble detected "VR43Logic Data". Alarms. al_08

Network: 89

Alarm: disabled from local pulpit

DB363.DBX2 4.7 DB363.DBX2 Control 6.6 on Cobble correctly detected inserted "VR43Logic "VR43Logic Data". Data". Drive. Drive. ControlOnO CobbleDete k cted

DB363.DBX1 .0 //1,VR43, cobble initiated due to continuity control "VR43Logic M100.3 Data". ALWAYS OFF Alarms. al_09 "M 100.3"

Network: 90

Alarm: stopped due to pulpit not in remote

DB363.DBX2 4.0 Inserted as devices "VR43Logic Data". Drive. Inserted

I0.6 L03 1PF 221 cooling bed area controls on "I 0.6"

DB316.DBX0 .0 1ED local pulpit, enabled controls "1EDlocalD esk". enabledCon trols

M100.2 ALWAYS ON "M 100.2"

DB363.DBX1 .1 //3,VR43, disabled from local pulpit "VR43Logic Data". Alarms. al_10

Page 44 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:17 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 91

Alarm: stopped due to fast stop request on main desk

M100.2 ALWAYS ON "M 100.2"

DB316.DBX0 .1 DB363.DBX3 1ED local pulpit, 4.1 remote Aux alarm enabled 11 "VR43Logic "1EDlocalD Data". esk". Drive. remoteEnab auxAl11 led DB363.DBX3 1.0 Automatic run. "VR43Logic Data". Drive. AutomaticR un

M100.2 ALWAYS ON "M 100.2"

DB363.DBX1 .2 //1,VR43, stopped due to local pulpit not in remote "VR43Logic Data". Alarms. al_11

DB363.DBX3 4.1 Aux alarm 11 "VR43Logic Data". Drive. auxAl11

Network: 92

Alarm: stopped due to fast stop request on local pulpit

M100.2 ALWAYS ON "M 100.2"

DB363.DBX3 4.2 Aux alarm 12 "VR43Logic Data". Drive. auxAl12 DB363.DBX3 1.0 Automatic run. "VR43Logic Data". Drive. AutomaticR un

I1.5 L03 222 1PH cooling bed area fast stop MPB "I 1.5"

DB363.DBX1 .3 //1,VR43, stopped due to fast stop request on main desk "VR43Logic Data". Alarms. al_12

DB363.DBX3 4.2 Aux alarm 12 "VR43Logic Data". Drive. auxAl12

Page 45 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:17 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 93

Alarm: Any automatic circuit breaker fault in box

M100.2 ALWAYS ON "M 100.2"

DB363.DBX3 4.3 Aux alarm 13 "VR43Logic Data". Drive. auxAl13 DB363.DBX3 1.0 Automatic run. "VR43Logic Data". Drive. AutomaticR un

M100.2 ALWAYS ON "M 100.2"

DB363.DBX1 .4 //1,VR43, stopped due to fast stop request on local pulpit "VR43Logic Data". Alarms. al_13

DB363.DBX3 4.3 Aux alarm 13 "VR43Logic Data". Drive. auxAl13

Network: 94

Alarm: converter protection

DB363.DBX2 4.0 Inserted as devices "VR43Logic Data". Drive. Inserted

M100.2 ALWAYS ON "M 100.2"

DB363.DBX1 .5 //2,VR43, any automatic circuit braker fault in box "VR43Logic Data". Alarms. al_14

Network: 95

Alarm: Get alarms from converter

DB363.DBX2 5.6 Line DB363.DBX2 contactor 4.0 is Inserted inserted as devices "VR43Logic "VR43Logic Data". Data". Drive. Drive. LineInsert Inserted ionOk

I15.1 VR43 L03 D02 280 inverter ready "I 15.1"

DB363.DBX1 .6 //1,VR43, converter protection "VR43Logic Data". Alarms. al_15

Page 46 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:17 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 96

Lubrication missing alarm FC40 DB531.DBW190 -- Retrives the SVT alarms

CALL "GetSVTAlarms" AlarmCode :="VR43DeviceData".PPO_read.PZD7 DBNumber :=363 ByteNumber :=2 BytesQuantity:=3 Alarm :=#ScratchX1 Network: 97 Lubrication unit not running alarm

#ScratchX1

DB363.DBX2 DB363.DBX3 4.7 8.0 Control min oil on lubricatio correctly n flow inserted filtered "VR43Logic "VR43Logic Data". Data". Drive. Drive. ControlOnO minOilFlow k Filtered

DB363.DBX5 .0 //2,VR43, lubricatio n flow missing "VR43Logic Data". Alarms. al_41

Network: 98

Alarm: Any motor thermal protection in box +D21

DB363.DBX2 4.7 Control on correctly inserted "VR43Logic Data". Drive. ControlOnO k

M100.2 ALWAYS ON "M 100.2"

DB363.DBX5 .1 //3,VR43, lubricatio n unit not running "VR43Logic Data". Alarms. al_42

Network: 99

Alarm: Any motor thermal protection in box +D22

DB363.DBX2 4.7 Control on correctly inserted "VR43Logic Data". Drive. ControlOnO k

I15.2 VR43 L03 D02 280 aut. circuit breaker on +D21 "I 15.2"

DB363.DBX5 .2 //3,VR43, any motor thermal protection in box +D21 "VR43Logic Data". Alarms. al_43

Page 47 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:17 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 100

Alarm: Any motor thermal protection in box +D23

DB363.DBX2 4.7 Control on correctly inserted "VR43Logic Data". Drive. ControlOnO k

I15.3 VR43 L03 D02 280 aut. circuit breaker on +D22 "I 15.3"

DB363.DBX5 .3 //3,VR43, any motor thermal protection in box +D22 "VR43Logic Data". Alarms. al_44

Network: 101

Alarm: Any motor thermal protection in box +D24

DB363.DBX2 4.7 Control on correctly inserted "VR43Logic Data". Drive. ControlOnO k

I15.4 VR43 L03 D02 280 aut. circuit breaker on +D23 "I 15.4"

DB363.DBX5 .4 //3,VR43, any motor thermal protection in box +D23 "VR43Logic Data". Alarms. al_45

Network: 102

Alarm: Any motor thermal protection in box +D25

DB363.DBX2 4.7 Control on correctly inserted "VR43Logic Data". Drive. ControlOnO k

I15.5 VR43 L03 D02 280 aut. circuit breaker on +D24 "I 15.5"

DB363.DBX5 .5 //3,VR43, any motor thermal protection in box +D24 "VR43Logic Data". Alarms. al_46

Page 48 of 49

SIMATIC

Pomina\ 01/03/2013 09:44:18 AM PLC3-CB (S7-400)\CPU 416-2 DP\...\FC363 - <offline>

Network: 103

status byte to HMI

DB363.DBX2 4.7 Control on correctly inserted "VR43Logic Data". Drive. ControlOnO k

I15.6 VR43 L03 D02 280 aut. circuit breaker on +D25 "I 15.6"

DB363.DBX5 .6 //3,VR43, any motor thermal protection in box +D25 "VR43Logic Data". Alarms. al_47

Page 49 of 49