Scribd
Upload
31 views

Question Paper

hsn

Uploaded by

Hemalatha Santhanam
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
31 views

Question Paper

hsn

Uploaded by

Hemalatha Santhanam
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

NEW PRINCE SHRI BHAVANI COLLEGE OF ENGINEERING

DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING CS 2060 HIGH SPEED NETWORKS UNIT TEST - I Year/Sem: IV/VII Date: ANSWER THE FOLLOWING 1. What are the main features of ATM? 2. What is virtual path identifier and virtual connection identifier? 3. List the levels of fiber channel and the functions of each level? 4. What is the difference between AAL3/4 and AAL3/5? 5. What is meant by SAR and CS? PART A(2*5=10) Max. Mark: 50

ANSWER THE FOLLOWING

PART B (4*10=40)

1. Explain the ATM cell with a suitable diagram and explain Generic Flow Control and Header error control. 2. Explain the architecture of 802.11 3. Explain Fiber channel Protocol architecture. 4. Give the requirements of wireless LAN in detail. 5. Explain the Fast and Gigabit Ethernet.

NEW PRINCE SHRI BHAVANI COLLEGE OF ENGINEERING


DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING EC2305 TRANSMISSION LINES AND WAVEGUIDES UNIT TEST - I Year/Sem: III/V Date: ANSWER THE FOLLOWING PART A(2*5=10) Max. Mark: 50

1. What are the advantages of m-derived filters? 2. Define cutoff frequency. 3. If Zoc =1000 and Zsc =360, determine the Zo of the symmetrical network.

4. A constant-K T-section high pass filter has a cutoff frequency of 10 KHz. The design impedance is 600 ohms. Determine the value of L. 5. For a symmetrical network, define propagation constant and characteristic impedance.

ANSWER THE FOLLOWING

PART B(4*10=40)

1. Derive the equations for the characteristic impedance of symmetrical T and networks. 2. Design a constant-K T-section band pass filter with cutoff frequencies of 1KHz and 4KHz. The design impedance is 600 ohms. 3. Design and derived m-derived section high pass filter with relevant diagrams. 4. Design an m-derived section low pass filter having a cutoff frequency (fc) of 5000 Hz and a design impedance of 600 ohms. The frequency of infinite attenuation at 1.25fc. 5. Draw and explain the operation of constant-K T-section band elimination filter with necessary expressions and also present the design equations.

You might also like