Scribd
Upload
20 views

Pompa Beng Beng

The document provides information for selecting a beng beng pump for pumping water at 10 degrees C with a viscosity of 2000 cP and a vapor pressure of 1.01 bar. It recommends the LU44 pump which can pump 1.01-3 bar at a flow rate of 1 m3/h and has a maximum differential pressure of 3 bar.

Uploaded by

rogandatambunan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
20 views

Pompa Beng Beng

The document provides information for selecting a beng beng pump for pumping water at 10 degrees C with a viscosity of 2000 cP and a vapor pressure of 1.01 bar. It recommends the LU44 pump which can pump 1.01-3 bar at a flow rate of 1 m3/h and has a maximum differential pressure of 3 bar.

Uploaded by

rogandatambunan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Page 1 of 1

Application: beng beng Pump Selection: Quantity: 1

Customer: Project: Cokelat beng beng Reference: Water C cP bar abs mm m/h bar abs bar bar bar 10 2000 0 No Particles 0 1 1.01 3 3 1.01

Fluid Pumped:
Temperature Viscosity Vapour Pressure Particle Type: Particle Size Flow Rate Inlet Pressure: Outlet Pressure Differential NIPA

Pump Selection: - LU44


Speed Speed % Max Speed Tolerance NIPR NIPR % NIPA Absorbed Power Torque Differential Pressure Pressure % Max Maximum Pump Differential rpm rpm bar kW Nm bar bar 82 8 0 0.21 21 0.22 25.6 3 38 8

Pump Specification
316L / 1.4404 304 grade Stainless Steel Code 9 - Scimitar - 316 / 1.4401 Code 1, Double, SiC/SiC, C/SiC Standard Machined Rotating element - Silicon Carbide, Stationary element - Silicon Carbide Rotating element - Carbon, Stationary element - Silicon Carbide Peroxide-cured EPDM seal L-cups, quadrings and end-cover joint ring. Certified to FDA CFR 21, Primary Elastomers: 177.2600 Secondary Elastomers: EPDM O-rings End Cover: Code 0 - End Cover Inlet Port: 1 inch Tri-Clamp to ISO2852 / BS 4825 : Part 3 Outlet Port: 1 inch Tri-Clamp to ISO2852 / BS 4825 : Part 3 Additional Information: Features: Ultima Ultra-Hygienic Rotary Lobe Pump Displacement - 20.4 l/100 revs CIP and SIP to EHEDG protocols Crevice-free pump head, external rotor retainers Pump head material - 316L / 1.4404 Pump Head Material: Bearing House Material: Rotor: Seal: Surface Finish: Primary Shaft Seals: Secondary Shaft Seals:

Ordering Information and Recommended Spare Parts:


Model Number: Shaft Seal (2 of each per pump) Elastomer Kit: (1 per pump) Temperature Control Jackets (2 per pump) Repair Kit LU440-1190E 96080-0597 56484-0007B N/A 54485-0000B

file:///C:/Program%20Files%20(x86)/Jabsco/untitled.htm

7/17/2013

You might also like