Scribd
Upload
77 views

SolidWorks FloXpress Report

SolidWorks FloXpress provides a qualitative overview of water or air flow within a model, identifying the smallest flow passage of 0.100 m. While it estimates maximum velocity, it lacks quantitative results and users are directed to Flow Simulation for pressure drop and flow rate values. The analysis examined water flow through an assembly with an inlet mass flow rate of 0.5000 kg/s at 293.15 K and environmental pressure of 101325.00 Pa at 293.20 K, finding a maximum velocity of 0.029 m/s.

Uploaded by

Jefrie Ronald
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
77 views

SolidWorks FloXpress Report

SolidWorks FloXpress provides a qualitative overview of water or air flow within a model, identifying the smallest flow passage of 0.100 m. While it estimates maximum velocity, it lacks quantitative results and users are directed to Flow Simulation for pressure drop and flow rate values. The analysis examined water flow through an assembly with an inlet mass flow rate of 0.5000 kg/s at 293.15 K and environmental pressure of 101325.00 Pa at 293.20 K, finding a maximum velocity of 0.029 m/s.

Uploaded by

Jefrie Ronald
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

SolidWorks FloXpress Report

SolidWorks FloXpress is a first pass qualitative flow analysis tool which gives insight into water or air flow inside your SolidWorks model. To get more quantitative results like pressure drop, flow rate etc you will have to use Flow Simulation. Please visit www.solidworks.com to learn more about the capabilities of Flow Simulation.

Model
Model Name: C:\Users\Joe_Butt\Documents\Assem2.SLDASM

Smallest Flow Passage


Smallest flow passage: 0.100 m

Fluid
Water

Inlet Mass Flow 1


Type Faces Value Mass Flow Rate <0>@Lid 1^Assem2-1 Mass Flow Rate: 0.5000 kg/s Temperature: 293.15 K

Environment Pressure 1
Type Faces Value Environment Pressure <1>@lid 2^Assem2-1 Environment Pressure: 101325.00 Pa Temperature: 293.20 K

Results
Name Maximum Velocity Unit m/s Value 0.029

You might also like