Scribd
Upload
218 views

Baseplate Design With Eccentricity

The document provides calculations to determine the minimum required dimensions of a base plate for a given total axial load and moment. It calculates the eccentricity, compressive stresses, moment at the critical section, and required thickness. The conclusion states the recommended length, width, and thickness of the base plate as 450 mm, 400 mm, and 25 mm respectively.

Uploaded by

mahantesh_83
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
218 views

Baseplate Design With Eccentricity

The document provides calculations to determine the minimum required dimensions of a base plate for a given total axial load and moment. It calculates the eccentricity, compressive stresses, moment at the critical section, and required thickness. The conclusion states the recommended length, width, and thickness of the base plate as 450 mm, 400 mm, and 25 mm respectively.

Uploaded by

mahantesh_83
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Base Plate with minimum eccentricity Total Axial load Moment Eccentricity Length of base plate Width of base

plate Length of member Width of member

P M e L B L B

= = = = = = =

50 1.5 30 450 400 250 125

t tm mm mm mm mm mm

e/L

Safe compressive stress in concrete Width of base plate (1 + 6e) P L*ac per L Max. compressive stress under nearer edge (1 + 6e) P L*B L Min. compressive stress under farther edge (1 - 6e) P L*B L Overhang beyond column

e/L < 1/6 ac per B' B

0.067

= = =

4.000 388.889 400

N/mm2 mm mm

pmax

3.889

N/mm2

pmin

1.667

N/mm2

100.000

mm

Stress in critical section Moment M @ critical section x-x Permissible bending stress

= = cbc per =

3.395 18621.399 189.000

N/mm2 Nmm N/mm2

Thickness of base plate sqrt(M*6/(cbc* B))

t say

= =

24.314 25.000

mm mm

Conclusion: Provide Length Width Thickness = = = 450 400 25 mm mm mm

You might also like